Step 5:
Attach middle pole (F) to top pole (A) (result of
step 4) by aligning hole on t-pole with button on
middle pole until it clicks in place.
Step 7:
Attach stake base (G) (result of step 6) to middle
pole (F) (result of step 6) by aligning hole in
middle pole with button on stake base until it
clicks in place.
Step 6:
Attach stake support (H) to stake base (G) by
inserting it through opening.
When everythjng is assembled, insert stake base firmly into the ground. For best results, install on flat ground and
ensure that the stake is 90 degrees vertical to the ground.
Lay assembly down for the following steps:
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2022 Exhart - Westlake Village, CA 91362. Made in China / Fabrique en Chine. All Rights Reserved.
exhart.com