Insert dowels (C) into parts (2,3,4) as shown in the diagram.
Screw cam bolts (B) into parts (1), Screw cam bolts (F) into parts (3).
Attach parts (2) to legs (3)as shown in the diagram. Carefully place cam locks (E) into
parts (2) and tighten nut (G) with wrench (J).
Attach parts (4) to legs (3)as shown in the diagram. Carefully place cam locks (E) into
parts (4) and tighten nut (G) with wrench (J).
Attach legs (3) to parts (2)(4) as shown in the diagram. Carefully place cam locks (E) into
parts (2,4) and tighten nut (G) with wrench (J).
Inset the plastic cover (H) as shown in the diagram.
Place top panel (1) on top of parts (2) and legs (3) as shown in the diagram.
Tighten all cam locks (A) to secure top panel to frame.
Place sticker (M) over holes as per diagram.
Slide fabric bins (5) into place as shown.
/
