Walker Edison Furniture Company HD58BDHBGW Operating instructions

P.2

General Assembly Guidelines

I. Ensure that all parts and hardware are available before beginning assembly.

II. Follow each step carefully to ensure the proper assembly of this product.

21

III. Two people are recommended for ease in the assembly of this product.

IV. The three main types of hardware used to assemble this product are : wood

dowels , screws and bolts.

V. The provided glue is to secure wood dowels in place . When first inserting dowels ,

locate the appropriate hole for the dowel , place a small amount of glue in the hole

and insert the dowel . Wipe away excess glue immediately.

In future assembly steps when dowels are necessary to attach assembly parts

together , place a small amount of glue on the end of the dowel before attaching

parts together . Wipe away excess glue immediately.

VI. A Phillips head screwdriver is required for the assembly of this product .

VII. Power tools should not be used to assemble this product .

Copyright

©

P.3

Copyright

©

Parts List

1

2

12

11

3

6

4

7

5

3

8

10

9

20

21

13

14

15

16

17

18

19

Step 2

Step 1

Copyright

©

P.5

Insert wooden dowels (A) to parts (3).

Insert wooden dowels (A) to parts (4,5).

A

3

5

4

Step 4

Step 3

Copyright

©

P.6

Insert wooden dowel (A) to parts (9,10,13).

Attach cam bolts (D) to part (2).

A

B

A

D

A

10

9

2

13

Step 6

Step 5

P.7

Copyright

©

Attach cam bolts (D) to part (1).

Attach cam bolts (D) to parts (14,15,16,17,18,19).

A

D

D D

D

1

16

17

14

15

18

19

D

Copyright

©

Step 8

Step 7

P.8

21 3

Attach parts (16) and (17) to part (4), and then attach cam locks (C) to fully assemble part (4).

Please note in the diagram that the holes for the adjustable shelf on part (3) are on the same side as the

21 3

C

4

3

16

17

14

15

18

19

Attach parts (14,15) and (18,19) to part (3), and then attach cam locks (C) to fully assembled part (3) ,

groove for the back panel on parts (14,19).

Copyright

©

Step 10

Step 9

P.9

21 3

Use cam locks (C) to connect bottom panel (10) to Legs (16,17).

Use cam locks (C) to connect bottom panel (9) to Legs (16,17).

21 3

C

10

16

17

16

17

9

Copyright

©

Step 12

Step 11

P.10

Use wrench (P) ot secure part (5) to bottom panel (9). Note that the small holes for the doors should be

toward the front of the console.

Slide back panel (11) into part (16) as shown in diagram.

F x2

P

9

5

11

16

10

Copyright

©

Step 14

Step 13

P.11

Use cam locks (C) to connect parts (14,15) to bottom panel (10).

Slide Back panel (12) into part (16) as shown in diagram.

21 3

C

14

15

10

16

9

12

Copyright

©

Step 16

Step 15

P.12

Use cam locks (C) to connect legs (18,19) to bottom panel (9).

Use cam locks (C) to connect panel (2) to the frame assembly as showm in diragram.

21 3

C

9

12

19

18

2

3

5

4

Copyright

©

Step 18

Step 17

P.13

Use wrench (P) to secure part (13) to part (2).

Use cam locks (C) to connect top panel (1) to leg parts (13,14,15,18,19) as shown in diagram.

21 3

C

F

P

13

2

1

13

14

15

19

18

Copyright

©

Step 20

Step 19

P.14

Attach plastic wedges (H) by using screws (J) as shown in the diagram.

Place stickers (E) over cam locks as desired.

E

H x8

H

J x8

12

11

2

19

10

9

16

14

Copyright

©

Step 22

Step 21

P.15

Insert shelf supports (G) into parts (3)(4)(5) as shown in the diagram.

Place shelves (6)(7)(8) as shown in the diagram.

G

3

5

4

6

7

8

Copyright

©

Step 24

Step 23

P.16

Use screw (T) to secure door stopper (L) to part (5) as per diagram.

L

T

5

Walker Edison Furniture Company HD58BDHBGW Operating instructions

This manual is also suitable for

Walker Edison Furniture Company HD58BDHBGW Operating instructions

Related papers

Other documents