Page is loading ...
Installation Instructions for
Crossblend Grande
1.0
P959_L
980CROSSBGP
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
Install the Lamp and Metal Shade
CAUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Screw the lamp into the socket.
Suspension
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1
Refer to fixture marking for lamp information.
2
Feed the socket assembly through the bottom of the shade
until it rests evenly on the tabs.
1A
SOCKET
1B
LAMP
1
TAB
SHADE
2
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2017 Lighting.All rights reserved.The " Lighting" graphic is aLBL LBL
registered trademark of Lighting. Lighting reserves the right toLBL LBL
change specifications for product improvements without notification.
A Generation Brands Company
/
