Roche iScan HT IVD User manual

Brand: Roche

Model: iScan HT IVD

Type: User manual

Ventana Medical Systems, Inc.

www.ventana.com

Part No.: Part No.: PL-000127-EN Rev. D

May 2019

VENTANA iScan HT Reference Guide

Version 1.1

ii VENTANA iScan HT Reference Guide

VENTANA iScan HT Reference Guide

Trademarks

VENTANA, VIRTUOSO, ISCAN, and the VENTANA logo are trademarks of Roche. All other trademarks are the property of their

respective owners.

Open Source And Commercial Software

Portions of the VENTANA iScan HT slide scanner might include one or more Open Source or Commercial Software programs. For

copyright and other notices and licensing information regarding such Software programs included with the VENTANA iScan HT slide

scanner, please see Appendix D of this guide and the product online help pages included with the product.

The VENTANA iScan HT slide scanner as a whole may form a regulated device in accordance with the applicable laws - please refer to

this guide and the labels for details. Please note that the respective authorisation, in compliance with applicable laws, will not apply in

case of any unauthorised changes to the VENTANA iScan HT slide scanner.

Contact

www.ventana.com

Ventana Medical Systems, Inc.

1910 E. Innovation Park Drive

Tucson, AZ 85755

USA

+1 520 887 2155

+1 800 227 2155 (USA)

Roche Diagnostics GmbH

Sandhofer Strasse 116

D-68305 Mannheim

Germany

+49 621 7590

Part No.: PL-000127-EN Rev. D iii

Table of Contents

About the VENTANA iScan HT Slide Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Welcome! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

This Guide Includes Instructions to: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Intended Use for the VENTANA iScan HT Slide Scanner: . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Who Should Read This Reference Guide? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

What is in this Reference Guide? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1: Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

VENTANA iScan HT Slide Scanner Safety Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Symbols and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

VENTANA iScan HT Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Instrument Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Instrument Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Work Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Local Area Network (LAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Telephone Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Computer and Monitor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Compliance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Hardware Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Cyber Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Securing Networks and Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Protecting Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Evaluate Your Software Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Backup and Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Input and Output Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Slide Specifications and Barcodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Standard Slide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Help and About the VENTANA iScan HT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2: Operating the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

General Operating Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Starting the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Starting the VENTANA iScan HT Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Shutting Down the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Main View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Main View Menu Pull-Downs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Scanner LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

The Scanner Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

The Carousel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Carousel Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Loading or Unloading the Rack with Slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Rack Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

iv Ventana Medical Systems, Inc.

Table of Contents VENTANA iScan HT Reference Guide

Rack Map Colour Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Viewing Rack Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Viewing Rack Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

The Slide List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Thumbnails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

The Worklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Selecting Racks in the Worklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Viewing Rack Status in the Worklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Worklist Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Editing the Worklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Interrupting the Worklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Aborting the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

3: Setting System Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

General Tab - Application Settings and Values: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Changing General Settings Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

File Management Tab - Settings and Values: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Changing File Management Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Scan Profile Tab - Settings and Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Scan Profile Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Creating a Scan Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Viewing a Scan Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Updating a Scan Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Deleting a Scan Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Configuring Barcodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Barcode Formats Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Configuring a 2D Barcode Filename . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Defining the 2D Barcode Filename Metadata . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Configuring for Multiple Barcode Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

4: Rack Level Processing and Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Creating Thumbnails and/or Scans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Scan Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Interrupting the scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Changing Settings and Controls for the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Selecting Racks for Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Changing the Scan Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Saving Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Focus Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Magnification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

AOI Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Enable Volume Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Annotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

5: Slide Level Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Slide List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Slide List Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Slide List Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Changing Slide Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Saving Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Changing the Scan Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Creating a Thumbnail or Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Editing Slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Opening and Viewing a Slide in the Thumbnail Pane . . . . . . . . . . . . . . . . . . . . . . . . . . 90

VENTANA iScan HT Reference Guide Table of Contents

Part No.: PL-000127-EN Rev. D v

Inspecting AOI and Focus Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Editing the AOI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Scanning the Slide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Using the Image Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Re-Scanning a Slide after a Successful Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

6: File Management Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Accessing the File Management Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

A: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

System Abort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Recovery Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Possible Recovery Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Hard Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Power Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Unrecoverable Error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Starting the Recovery Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Error Handling in General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Power Failure or Abort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Scanner Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

B: Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

C: Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Cleaning the Scanner Casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Cleaning the Scanner Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Equipment Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

D: VENTANA iScan HT Open Source and Commercial Software Information . . . . . . . . . 133

VENTANA iScan HT Open Source and Commercial Software . . . . . . . . . . . . . . . . . . . . . 133

1. Libtiff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

2. Libjpg - Independent JPEG Group's free JPEG software . . . . . . . . . . . . . . . . . . . . 133

3. Libxml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

4. Log4cxx and Log4Net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

List of 3rd Party Commercial Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

1. End User License Agreement for the Intel(R) Software Development Products . . . 136

2. ClearImage Software Deployment (Inlite) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

vi Ventana Medical Systems, Inc.

Table of Contents VENTANA iScan HT Reference Guide

INTENTIONALLY BLANK

Part No.: PL-000127-EN Rev. D 1

About the VENTANA iScan HT Slide Scanner

Welcome!

The VENTANA iScan HT slide scanner incorporates cutting edge optical, focus, and slide handling technologies to address

the high volume demand of the anatomical pathology laboratory. By combining precise detection of the area of interest (AOI)

and industry leading scan times with reliable slide handling, the VENTANA iScan HT slide scanner empowers your laboratory

to manage high throughput exceptional quality digital pathology images.

The VENTANA iScan HT slide scanner is fully integrated with the Virtuoso workflow management software, making it a

complete digital pathology solution from image acquisition through reporting. Only the VENTANA iScan HT slide scanner

from Ventana Medical Systems, Inc., a global leader in anatomical pathology delivers true workflow optimisation in your

pathology laboratory.

This Guide Includes Instructions to:

• safely handle and work with the scanner;

• use the scanner to perform a one-touch, walk-away scan of one or more slides;

• use the scanner to perform a manual scan of one or more slides;

• use the Image Viewer to view digital-scanned slides locally or remotely.

Intended Use for the VENTANA iScan HT Slide Scanner:

The VENTANA iScan HT slide scanning system is a computer and imaging based device for in vitro examination of human

tissue specimens. The system has the capability to scan, digitise, compress, store, retrieve and view digitised images of human

tissue slide specimens.

Who Should Read This Reference Guide?

• Pathologists and/or Technologists using the scanner to scan slides

• Pathologists and/or Technologists using Image Viewer to view digital images of slides. See the Image Viewer Reference

Guide for additional information.

2 Ventana Medical Systems, Inc.

About the VENTANA iScan HT Slide Scanner VENTANA iScan HT Reference Guide

What is in this Reference Guide?

Related Documents

For additional information, see the Virtuoso Reference Guide (PL-000092-EN) and the Image Viewer Reference Guide

(PL-000112).

Safety Requirements and Notices “1: Safety Information” on page 3

Scanner Operations “2: Operating the Scanner” on page 21

System Defaults “3: Setting System Defaults” on page 43

Rack Process and Editing “4: Rack Level Processing and Editing” on page 69

Slide Level Editing “5: Slide Level Editing” on page 79

File Management Application “6: File Management Application” on page 103

Troubleshooting Information “A: Troubleshooting” on page 107

Error Messages “B: Error Messages” on page 115

Maintenance “C: Maintenance” on page 131

Open Source and Commercial Software

Information

“D: VENTANA iScan HT Open Source and Commercial Software Information” on page 133

Part No.: PL-000127-EN Rev. D 3

1: Safety Information

Please read, understand and follow the safety requirements and notices specified in this chapter before using the iScan HT

slide scanner.

iScan HT Slide Scanner Safety Compliance

All users of the iScan HT slide scanner must read and understand this guide. For optimal user safety

and operational benefit, the

iScan HT slide scanner should only be used in an environment where good clinical practice guidelines are followed.

Compliance with all warnings and cautions that appear in the reference guide or on equipment is recommended to ensure

personal safety and prevent damage to either the instrument or equipment connected to it. If usage of the equipment differs

from the manufacturer's instructions, the protection provided by the equipment may be impaired or otherwise compromised.

NOTE: There are no operator serviceable parts.

Safety Training

All operators must be trained in safe use of the instrument. After such training, operators must

ensure the following before attempting to use the scanner:

• The equipment must be connected to an uninterruptible power supply (UPS).

• The equipment must be connected to a voltage source that is consistent with the rating label.

• Instruments not used in a manner specified by Ventana Medical Systems, Inc., may impair protection provided by the

equipment.

• Operators must keep their hands clear of the moving parts of the instrument.

• Operators must keep their hands clear of potential pinch points.

• Operators must keep their hands clear of all internal hot surfaces.

Make sure the unit is unplugged before relocating it or attempting to move it.

Technical Support

WARNING: DO NOT HANDLE BROKEN GLASS WITH BARE HANDS.

CAUTION: Good electrical safety practices should be observed at all times.

Ventana Medical Systems, Inc.

1910 E. Innovation Park Drive

Tucson, AZ 85755

USA

Tel (USA): +1 800 227 2155; for Technical Support, press 1

Tel: +1,520,887 2155; for Technical Support, press 1

4 Ventana Medical Systems, Inc.

1: Safety Information VENTANA iScan HT Reference Guide

Symbols and Warnings

This symbol highlights important information regarding hazards or practices that could directly or

indirectly lead to product damage, minor personal injury, serious personal injury, or even death.

There are three types of hazard statements associated with this symbol:

• Caution

• Warning

• Danger

This symbol alerts the user to the danger of exposure to hot surfaces.

WARNING: Do not block vents and inhibit airflow to the scanner.

WARNING: Do not lift the scanner with the handles. Rear handles are for removing

the cover during servicing.

This symbol alerts the user to the danger of exposure to biohazard.

CAUTION: The scanner must not be under any operation and must be in a safe

position to rotate the slide carousel.

CAUTION: Upper and lower temperature limitation/temperature range.

ESD

VENTANA iScan HT Reference Guide 1: Safety Information

Part No.: PL-000127-EN Rev. D 5

Recycle

WARNING: DO NOT USE CRACKED OR BROKEN SLIDES.

Cracked or broken slides can adversely affect the operation of the scanner.

Read the instructions in the reference guide.

Indoor use only.

Pinch point.

6 Ventana Medical Systems, Inc.

1: Safety Information VENTANA iScan HT Reference Guide

iScan HT Views

Figure 1-1. Front Views.

Figure 1-2. Rear View.

Carousel door Right access doorLeft access door LCD

Cable connections

Electrical plug

Cover handles

Vents

VENTANA iScan HT Reference Guide 1: Safety Information

Part No.: PL-000127-EN Rev. D 7

Instrument Warnings

If the scanner is used in any way not specified in this guide, the protection provided by the equipment

may be compromised.

CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

To reduce the risk of electric shock, do not remove any cover or panel. No user-serviceable parts

are inside. Refer servicing to qualified service personnel.

CAUTION: THE iScan HT SLIDE SCANNER GENERATES, USES,

AND CAN RADIATE RADIO FREQUENCY ENERGY.

If not installed and used in accordance with the instructions in this guide, the scanner may cause

interference to radio communications. The scanner has been tested and found to comply with the

limits for a Class A computing device (pursuant to Subpart B of Part 15 FCC Rules), which are

designed to provide reasonable protection against such interference when the scanner is operated

in a commercial environment. Operation of the scanner in a residential area can cause

interference, in which case the user, at his own expense, will be required to take whatever

measures are required to correct the interference.

WARNING: DO NOT EXPOSE THE iScan HT SLIDE SCANNER TO RAIN OR

MOISTURE.

To reduce the risk of fire or electric shock, do not expose the

iScan HT

slide scanner to rain or

moisture.

DANGER: SHOCK HAZARD. DO NOT OPEN.

8 Ventana Medical Systems, Inc.

1: Safety Information VENTANA iScan HT Reference Guide

Instrument Labels

CSA

ATTENTION: REFER TO ACCOMPANYING DOCUMENTS.

CAUTION: REPLACE FUSE ONLY WITH A UL LISTED OR RECOGNISED

250V 2A RATED FUSE.

ATTENTION: DISPOSAL OF THE SCANNER UNIT MUST BE PERFORMED

IN COMPLIANCE WITH WASTE ELECTRICAL AND ELECTRIC EQUIPMENT (WEEE)

GUIDELINES.

VENTANA iScan HT Reference Guide 1: Safety Information

Part No.: PL-000127-EN Rev. D 9

Safety Instructions

Operating Instructions

• Read all safety and operating instructions before operating the scanner.

• Retain all safety and operating instructions for future reference.

Posted and Written Warnings

• Heed all warnings posted on the scanner and listed in the operating instructions.

Product Use Instructions

• Follow all operating and product use instructions.

Heat

• The scanner must be situated away from any heat sources, such as radiators, heat

registers, stoves, or other products that produce heat.

Ventilation

• Slots and openings in the scanner provide ventilation. They insure reliable

operation of the scanner, keeping it from overheating. These openings must not be

blocked or covered during operation.

Water and Moisture

• Do not use the scanner near water; for example, near a water bath, wash bowl,

kitchen sink or laundry tub, in a wet basement or near an open pool of water, or

other possible water hazards.

Attachments

• Do not use any attachments that are not recommended, as they may

cause hazards.

Power Sources

• The scanner must be operated from the type of power source indicated on the

marking label and in the installation instructions. If you are not sure of the type of

power supply to your facility, consult your local power company.

Grounding and Polarisation

• The scanner is equipped with a polarised AC plug with integral safety ground pin.

Do not defeat the safety ground in any way, shape, or form.

Power Cord Protection

• Power supply cords must be routed so that they are not walked on or pinched by

items placed on or against them. Pay particular attention to the cords at AC wall

plugs and convenience receptacles, and at the point where the cord enters the

product.

• Power supply cords must be readily accessible in case power to the unit must be

intentionally interrupted.

Lightning

• For added protection for the scanner during a lightning storm, or when the scanner

is left unattended and unused for long periods of time, unplug the scanner from the

AC wall outlet. This will prevent damage to the scanner due to lightning and power

line surges.

Overloading

• Do not overload AC wall outlets, extension cords, or integral convenience outlets;

this can result in a fire or an electric shock hazard.

Power Loss

• In the event of a loss of power during the scanning or thumbnailing process,

VENTANA iScan HT will rely on power from the universal power supply (UPS) to

keep the vacuum on. You should use the Recovery Console and follow the

procedures to return slides to the rack.

Object and Liquid Entry

•

Never push objects of any kind into the scanner through openings in the scanner;

hey

may touch dangerous voltage points or short circuit parts, possibly resulting

in a fire

or electric shock. Never spill liquid of any kind on the scanner. Do not place liquids

on the scanner.

Accessories

• Do not place the scanner on an unstable cart, stand, tripod, bracket, or table. The

scanner could fall, causing serious personal injury and/or damage to the scanner.

• Any mounting of the scanner must be performed in compliance with installation

instructions.

• Do not attempt to connect accessories or use cabling that has not been explicitly

provided for the scanner.

Stationary Equipment

• The scanner should be moved only with extreme care. Quick stops, excessive

force, and uneven surfaces might cause the scanner to overturn.

10 Ventana Medical Systems, Inc.

1: Safety Information VENTANA iScan HT Reference Guide

Operating Environment

Neighbouring Devices

• Electromagnetic interference (EMI) from external sources could affect scanner

operation. The scanner should be positioned far enough from neighbouring

devices to prevent any problems with EMI.

• Vibrations or jolts from neighbouring devices can skew scanner performance. The

scanner should be positioned far enough from neighbouring devices

to prevent any problems caused by vibrations or jolts.

Network Connections

• The scanner must be set up and configured as specified in this document in order

to function properly over the Internet.

Insects

• Do not allow insects to find their way into the scanner. They could damage internal

parts and have a negative impact on system operation or performance.

Servicing

• Refer all servicing to Certified Service personnel.

Damage Requiring Service

• Unplug the scanner from the wall AC outlet and refer all servicing to Certified

Service personnel in compliance with the conditions specified below:

- when the AC cord or plug is damaged;

- if liquid is spilled on the scanner;

- if objects are dropped inside the scanner;

- if the scanner is exposed to rain or water;

if the scanner does not operate normally (according to operating instructions);

- if the scanner is dropped or is damaged in any way;

- when the scanner presents an evident change in performance.

(This might indicate a need for servicing.)

Replacement Parts

• When replacement parts are required, confirm that the Service Technician uses the

specified replacement parts. Unauthorised substitutions may result in fire, electric

shock, or other hazards.

Safety Check

• Upon completion of any repairs to the scanner, ask the Service Technician to

perform safety checks to determine that the scanner is in proper operating

conditions.

Cleaning

• Do not use chemical cleaners or solvents. Use warm water with mild soap on a

damp, soft cloth; rinse and dry with a clean, damp cloth.

Product Disposal Instructions

• Dispose of any and all scanner parts in compliance with guidelines and regulations

specified by your city for the disposal of electronic equipment and/or electronic

components.

Lighting In the work area: good and bright.

Air

In the room: clean and cool (67 to 76 degrees F / 19 to 24 degrees C), with maximum

humidity 30 to 80 per cent.

CAUTION: Replace fuse only with a UL Listed or

recognised 250V 2A rated fuse.

VENTANA iScan HT Reference Guide 1: Safety Information

Part No.: PL-000127-EN Rev. D 11

Work Surface

AC Power

Figure 1-3. Electrical Plug and ON/OFF Switch.

Rigid Lab Bench Tabletop space: 60 x 30 (deep)

Weight Support To hold scanner unit and monitor: 800 lbs. (~363 kg)

User Access

In front of scanner: 3 ft. (minimum)

NOTE: The rear of the scanner near the power switch and the power connection

should be readily accessible for power to the unit to be cut or disconnected.

Space Beneath Bench To store computer that comes with scanner: 24 x 12 x 24 (height)

UPS

120 Volts

230 Volts

CAUTION: USE THE CORRECT POWER CORD.

If the power cord supplied with the scanner does not match the wall plug configuration, do not use

the cord. Contact Ventana Medical Systems, Inc. to obtain the proper cord.

At least one grounded dual AC wall socket (3-conductor) is recommended for a power source. A

surge protector is also recommended.

Fuse

Plug

On - Off switch

12 Ventana Medical Systems, Inc.

1: Safety Information VENTANA iScan HT Reference Guide

Local Area Network (LAN)

Telephone Use

Software Compatibility

Please feel free to contact Ventana Technical Support if you have any additional questions regarding software compatibility.

Network Internet access is required, with a fixed IP (or access through firewalls)

Transfer rate 100 Megabits per second

LAN connection,

with Internet access

Required for remote maintenance of the scanner over the Internet.

NOTE: A LAN connection is not required to operate the scanner. A LAN connection

is required only if remote access is necessary.

Location Near the scanner work area in the lab.

Use

Facilitates communication between technical personnel and scanner Operator (as

needed).

CAUTION: DO NOT INSTALL MEMORY UPGRADES, DRIVERS, GRAPHIC, VIDEO

CARDS, EXTERNAL DEVICES, OR ANY OTHER HARDWARE AND

SOFTWARE ON THE WORKSTATION CONNECTED TO THE SCANNER.

Such installations can interfere with the operation of the scanner. Contact Ventana Technical

Support (Tel (USA): +1 800 227 2155, or Tel: +1 520 887 2155; for Technical Support, press 1)

before installing any of the above items.

Do not install any other

software or hardware on the

system.

• Other software or hardware could interfere with scanner operation

and invalidate the warranty.

The controller computer

comes

with virus detection software

installed.

• The Antivirus software that comes with the scanner has been tested and validated

by Ventana. Ventana can guarantee the scanner's performance ONLY with

supported versions of Antivirus software. Ventana currently supports Symantec

Endpoint Protection v. 11, 64-bit.

• Virus definition files can be automatically updated.

• Do not update the Antivirus software to a new version. If you have any questions

regarding this or need to upgrade your Antivirus software, please call Ventana

Technical Support to verify that this will not create any performance issues.

Do not allow your scanner

system to accept automatic

operating system updates

over the Internet.

• Automatic operating system updates over the Internet can interfere

with scanner operation.

• Please do not update your operating system without consulting someone from

Ventana Technical Support.

Scheduled or unscheduled

system software or hardware

backup or maintenance.

• Backup or maintenance can interfere with scanner system operation. Please call

Ventana Technical Support to verify that this will not create any performance

issues.

VENTANA iScan HT Reference Guide 1: Safety Information

Part No.: PL-000127-EN Rev. D 13

Computer and Monitor Specifications

Compliance Specifications

Hardware Specifications

Work Station Microsoft Windows; 64-bit Operating System

Storage Customer Usable Storage - 2TB, SATA

Connectivity 2 GIGABIT Ethernet ports

Monitor 24 flat-panel, high-resolution monitor (1920 x 1200)

CE Safety EN61010-2

This device meets the safety requirements for electrical equipment for measurement,

control, and laboratory use.

Input Format 25 mm x 75 mm microscope slides; 26 mm x 76 mm microscope slides

Slide Capacity 1 to 360 slides, using 18 integrated racks

Scanning Magnification 20X and 40X

Barcode Capability 1D and 2D option

Light Source Integrated LED

Touch-Screen LCD 257 mm“ (10.1) Diagonal, 1024 x 600 Resolution

Scan Viewing 24-bit true colour

Slide Storage Format BIF and TIF

Dimensions

35.6” W x 27.5” D x 25.5” H

90.424 cm W x 69.85 cm D x 64.77 cm H

904.24 mm W x 698.5 mm D x 647.7 mm H

Scanner Weight Approximately 370 lbs. (~170 kg)

Power 100-220 VAC, 50/60 Hz, 400 W (includes light source)

Current 5 Amps

14 Ventana Medical Systems, Inc.

1: Safety Information VENTANA iScan HT Reference Guide

Cyber Security

Any device that is connected to a network (internally or externally) has the potential to be compromised by unauthorised

access or viruses. As with most devices, the iScan HT slide scanner is designed to run on a computer utilising Micros oft

Windows and virus protection software, which requires validation and implementation of the appropriate patches.

Some of the potential cyber security hazards include:

malicious software that alters the device software (such as viruses);

• unauthorised access to the scanner that could compromise data safety;

• security of data transmitted over the Internet.

Cyber security involves protecting data by preventing, detecting, and responding to malicious cyber attacks. Cyber attacks

could involve computer viruses, which can completely erase data or hackers who alter files or even use the device as a host to

attack other devices. As serious as these hazards are, steps can be taken to maximise cyber security.

Securing Networks and Servers

Network security consists of the provisions made in the computer network infrastructure, policies adopted by the network

administrator to protect the network, and the network resources that prevent unauthorised access.

The following are critical steps for securing a network server:

• physical security (servers and network infrastructure behind locked doors);

• use of robust passwords;

• system and data backups (at regular intervals);

• data protection;

• terminating unused services;

• restricting access to used services.

The following are critical steps for securing a network server:

• data protection;

• data backups (at regular intervals);

• refusal of automatic updates from off-the-shelf software;

• antivirus software for computers and servers.

Protecting Data

Establishment of a network firewall and protection of the network against viruses using anti-virus software are effective

methods to protect data. Virus definitions should be kept up to date and regular scans of computers for spyware should be

performed using a legitimate anti-spyware application. If viruses or spyware are found, remove them immediately.

Evaluate Your Software Settings

The default settings of most software enable all available functionality. However, hackers may be able to take advantage of this

functionality to access devices. It is especially important to check the settings

for software that connects to the Internet

(browsers, e-mail clients, etc.). Apply the highest level of security

available that still provides needed functionality.

Backup and Recovery

In order to develop a successful backup and recovery plan, comprehension of data accessibility needs and of the potential

impact of data loss is essential. Automatic backup procedures need to be adopted using a data backup utility.

Page is loading ...

Roche iScan HT IVD User manual

Roche iScan HT IVD User manual

Roche iScan HT IVD User manual

Related papers

Other documents