- 2 -
OVERVIEW
The Sharper Image Night/Day Anti-Glare Visor clips onto any vehicle’s sun visor to help
you see better at night, and shield your eyes from the sun during the day.
ASSEMBLY AND INSTALLATION
1. Install 4 small screws with a screwdriver.
2. Install 1 big screw with a screwdriver.
3. Press the circle button and pull the telescoping boom to adjust the length so it can
fit over the existing sun visor.
4. Position the boom grips over the sun visor and press down on the booms to secure
into place. Remove the plastic film from both visors.
5. Press down on the side to properly align the visors.
6. When selecting your visor, rotate both plates 180°. Once you select your visor (sun
or night), fold the other visor up.
Telescopic boom
Button
Track
Button
Rotate
Sun Visor
(Gray)
Night Vision
(Yellow)
Night Vision
(Yellow)
Sun Visor
(Gray)