ONAGO FLY Smart Nano Drone Quick start guide
- Type
- Quick start guide
Quick Start Guide
Smart Nano Drone
Each time when you finish with ONAGOfly, please make sure to turn it off.
Please do not use ONAGOfly indoor and make sure the orange propellers are always
to the front side.
www.onagofly.com
hello@ongofly.com
Smart Nano Drone
V1.3
ONAGOfly 1
①
②
③
④
⑤
Camera
Front LEDs
Power button
Charging port
Back LEDs.
⑦
⑧
⑨
⑩
Motor
Memory card slot
GPS antennas
Interface for manufacturer
Fly in open areas: Please always fly ONAGOfly1 in locations that are free and clear
of
buildings, trees, power lines and other obstacles. Do not fly above or near people
or animals.
Do not fly over crowds.
Do not fly in winds that exceed 8-16 km/h (5-10MPH).
Maintain Line of Sight: Keep your aircraft in sight at all times, and avoid flying behind
buildings or other obstacles that may block your view.
ONAGOfly1 is not waterproof. Please do not fly above water or on a rainy day.
Age Recommendation: Not for under 18 years.
Please check your ONAGOfly1 before you fly, and ensure the battery is fully
charged.
Do not attempt to operate your aircraft with any worn and/or damaged
components, parts, etc. (including but not limited to, damaged propellers etc.)
Do not try to touch or close to the ONAGOfly1 with your hand, face or other part of
body while the propellers is spinning.
Please do not open or disassemble the product by yourself, since unauthorized
disassembly will void the product warranty and possibly cause your aircraft to
not work properly.
ONAGOfly1 is not compatible with any other product or component, which may
result in damage to the product property and/or cause serious injury.
Do not use the product to conduct any illegal and inappropriate behavior
(including but not limited to spying, military action and illegal investigation).
Do not use the product to conduct any behaviors infringing upon the privacy of
others.
Do not use the product to infringe the property right of others.
Now meet your ONAGOfly
The ONAGOfly1's camera records video at up to 1080P 30fps and captures 15
megapixel photos. The built-in GPS enables hover in place and follow-me features.
Review the diagram below for a full list of your ONAGOfly1's parts:
⑧
②
● Front view
⑦
⑨
⑥
● Sideways view
The orange propellers are
always to the front side.
● Left view
⑤
1
Cautions
Thank you for purchasing ONAGOfly1. For your safety, please read the operating
instructions carefully before use. Be sure to watch our quick start video guide on
www.ONAGOfly.com or follow our YouTube channel: https:/ youtu.be AT7rxa-Eozk/ /
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
⑤
②
③
①
④
● Bottom view
⑩
▲
⑥ Propellers
ONAGOfly1's propellers can be
dismantled.*
When assembling, the propellers
should be installed in corresponding
positions. The propellers engraved
with the numbers. The letters
marked on propellers (A, B, C, D)
shall be respectively corresponding
to the letters on bottom machine
arms during assembly. The method of installing is seen as the figure (1). The
propellers must be installed in the right position regarding the safety. As seen in
figure (1). Otherwise Onagofly1 flight may be affected. Orange propellers shall
A
C
D
B
A
C
D
B
×
√
Notes:
There're two at the bottom of the GPS antenna coverage. So does that on
PCB board. These touch pots must be connected when installing. The Micro USB
port on the aircraft is only for maintenance. Please do not connnect it for charging.
contacts
Technical specification:
Aircraft
100*100*45mm
Weight: 135g (±2g)
Max Ascent Speed: 5m/s
Max Descent Speed: 3m/s
Max Speed: 15Km/h
Max Service Ceiling: 30m
Max Flight Time: Approximately 12 minutes
Features
Auto-takeoff
Auto-landing
Follow-me
Tilt mode
Battery
800mAh LiPo 2S
Memory card up to 64GB (exFAT C10 and above)
Battery power: 5.9Wh
Operating temperature: -10℃ to 40℃
Aircraft dimension (L*W*H):
Controlled by mobile device
Wifi working frequency: 2.4GHz
Max Communication Distance (open area):
30-50m (depending on Wifi signal
environment)
Receiving sensitivity of signals: -50dBm
Camera
Photos: 15 megapixels
Video: 1080P@30fps
Other accessories
3-inch propellers
Something you need to know before
using your ONAGOfly1:
be installed on the motor on the same side as the camera lens. After the
installation, please place the aircraft on open ground flatly, taking off from the
uneven ground may affect its attitude. (The camera's front should be the same
as the pilot's. Before taking off please make sure the camera's front is the same
as pilot's) *When disassemble the propellers, please fix the motor with one hand
and rotate the propellers counterclockwise upside slowly.
If video recording or taking photo is necessary, please make sure that Micro SD
card (the maximum memory of Micro SD card is 64GB (exFAT), Class10 and
above) has been correctly inserted. Besides, please format the Micro SD card into
FAT32 or exFAT (for 64GB SD card) format. Otherwise the aircraft may not be
turned on.
Maintain control at all times: even when using ONAGOfly1 autopilot functions
such as Auto-Takeoff, Auto-landing, always keep your hands on the Mobile
Device and maintain control of your aircraft when it is in flight.
Auto-landing due to the low battery, please do not fly it again manually, which
can result in damage to the battery.
Each time when you finish use with ONAGOfly1, please make sure to shut down
the power by pressing the power button.
Environmental Considerations
Do not fly in severe weather conditions. This include high winds (speed of 8-16km/h or
more), snow rain and fog.
Only fly in open areas. Tall buildings and steel structures may affect the accuracy
of the on-board compass and GPS signal.
Avoid obstacles, crowds, high-voltage power lines, trees and bodies of water.
Minimize electromagnetic interference by avoiding areas with high levels of
electromagnetism, including mobile phone base stations, radio transmission towers,
or Wi-Fi hotspots.
Aircraft and battery are subject to environment factors such as air density and
temperature. Be very careful when flying 6km (19,600ft) or more above sea level,
as battery and aircraft performance may not be at peak efficiency.
The GPS positioning mode can not be used for flight in the Antarctic/Arctic
Circle.
32
● Figure (1)
▲
▲
▲
▲
▲
Make sure to check whether the propellers are intact and fixed before flight, and
do not take off if any propellers are damaged or loose.
Please check the battery capacity before taking off and check whether the Micro
SD card is correct installed. The right way to install the Micro SD card: The side
with metal contacts on should be upside when inserting into the slot.
When the GPS is wink (As seen in figure (11)), Onagofly1 could fly stable in the
air but could not hold its position.
The initial password and the wifi network name would be modified in the setting
menu.(As seen in figure (9)). It vary when you restart.
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
You could set the video resolution, previewing resolution of real-time image
transmission, the size of the photos (it's needed to switch to the photo mode to
enable the setting) and the IR obstacle avoidance. When the aircraft is in motion
(flying) it is unable to change the settings in the menu.
Enable GPS on your Mobile Device.
Turn on the aircraft, and wait until the GPS icon turns orange on App (As seen in
Appendix figure (10)).
Take off and make the aircraft hold in position by 4-5 meters steadily.
Turn off the tilt mode.
Turn on the GPS follow by pressing the Follow icon until it turns orange.
Notes：
Onagofly will hover when the GPS signal is lost during the following mode. If you want to
switch to tilt mode, it needed to turn it on manually.
Before turning off the following mode, please note the direction of orange propellers point to,
then make the operation.
GPS follow mode
The ONAGOfly1 equipped with GPS module, please only use the aircraft in open
areas. When your ONAGOfly1 gets enough GPS signal, the GPS icon on App turns
orange and the status of the aircraft indicator lights as seen in Appendix figure (10).
It's recommended to turn the camera on after the GPS positioning mode is
active (Back LEDS turn to blue or GPS icon on App turns to orange), otherwise it
will affect the controlling indication.
The GPS signal is very sensitive to electromagnetic interference, which can
cause abnormal GPS data, leading to poor flight performance or even failure.
Regular calibration is required for optimal performance.
Positioning mode:
Your mobile device can control the aircraft within average communication distance
of around 30m (98.4ft) in an open space (the actual distance may be affected by
the communication conditions). *
ONAGOfly has HD real-time video streaming. The live streaming video of ONAGOfly1
available through the ONAGOfly App.
Once connected with the ONAGOfly App, the tilt mode is switched off by default but
the user can activate the function by keep pressing tilt mode button and control the
flight direction by tilting the mobile device.*
Using the mobile device App
Download the ONAGOfly app Search "ONAGOfly"
on the App Store or Google Play and download
the ONAGOfly app to your mobile device.
*ONAGOfly App compatible with device with
Android 4.4, iOS 7.0 or above.
Watch the tutorial videos on www.ONAGOfly.com
or follow our YouTube https://youtu.be/AT7rxa-Eozk
Check your App
App interface
Click and back to the album to preview the footage and photos taken by ONAGOfly1.
① Click the Home icon it will go back to the Media interface.
Notes：
The GPS icon turns orange when GPS connected, gray means off. ②
*The communication distance measured in anexperimental environment is approximately
98ft-262ft (30-50m). It may change under different communication situations.
*The gravity sensor of your mobile deviceis sensitive, please do not make big
movement with your mobile device when control ONAGOfly1.
*The GPS follow function could only be actived once the GPS connected.
54
● Figure (2)
Android
iOS
▲
▲
▲
▲
▲
▲
▲
▲
When ONAGOfly1 gets enough GPS signal, the aircraft will be able to activate the
Follow mode. The accuracy of GPS is affacted by the strength of GPS signal. How
to activate the Follow mode:
▲
▲
▲
④⑤⑥⑦⑧
⑤
These icons are gray when they're not active. It turns orange when it's
active. Tilt Mode is disable by default and its icon turns orange when it's active.
70%
Normal
GPS
Unlick
①
③ ⑤④
②
⑥
⑦
⑨
⑧
⑩
①
②
③
④
⑤
⑥
⑦
Home
Snapshot
Speed mode: Normal and Fast Switch
Unlock/Lock
GPS link and GPS following
Virtual control key
Gravity sensor mode switch
( Tilt Mode Switch)
⑩ Rotate horizontally(YAW direction)
Vertical movement (UP and DOWN)
⑧
⑨
Auto-landing
Mode switch between video and photo
Open camera and wait until the GPS icon on ONAGOfly
app turns orange before taking off.
Once the GPS icon on ONAGOfly app turns orange,
you're ready for taking off.
Hold the Lock button until the propellers spinning.
Hold your mobile device flat.
Press Auto-takeoff button until the aircraft automatically take off.
Push up/down the vertical movement bar to adjust Onagofly1's flying height.
Getting ready to takeoff your ONAGOfly1
The connecting frequency between the mobile device and the aircraft is 2.4GHz.
During the flight, please do not use other 2.4GHz communication devices
simultaneously.
Turn on ONAGOfly1
Connect ONAGOfly1 to your mobile devices
Takeoff
Tilt mode control
Auto-Landing
Press the Auto-landing button.
Maintain control at all times during auto-landing.
Camera
You can always switch the Photo/Video mode by pressing the photo/video icon
on the ONAGOfly1 app before take-off.
You can always take video before take-off.
It's recommended not to switch the photo/video or take video during flight.
GPS follow
Enable GPS on your Mobile Device.
Turn on the aircraft, and wait until the GPS icon turns orange on App.
Take off and make the aircraft hold in position by 13ft-16ft (4-5 meters) steadily.
Turn off the tilt mode by releasing your finger on the tilt mode button.
Turn on the GPS follow by pressing the Follow icon until it turns orange.
Battery charging
Please use the charger provided officially by the ONAGOfly. Connect the battery
supply firstly before charging (Shown in Bottom view ⑤).
Connect the charger to the AC power supply (100-240 V, 50/60 Hz, please use
the power changeover plug if needed).
Please ensure the aircraft is turned off and the plug in the battery bin is unplug
before charging.
The indicator lights are flashing in green indicates that the battery is charging.
76
● Figure (7)
Place your ONAGOfly1 on a flat surface, and make sure
the orange propellers are always to the front side.
Press the on/off button. The on/off button is shown as the
Figure (3). The aircraft beep and meanwhile the indicator
lights on (as shown in figure (10,11)) indicating that the
aircraft is turned on. When the back LEDs are red it means
the status of the aircraft is abnormal and you should not take off in that case.
● Figure (3)
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
● Figure (4)
▲
▲
▲
▲
▲
70%
Normal
GPS
Unlock
▲
*
*
Connect your ONAGOfly1 to the mobile device by connecting the Wi-Fi.
Choose the Wi-Fi named “OnagoflyXXX”, and enter the default password "12345678".
The initial password and the wifi network name would be modified in the setting menu.
▲
▲
▲
Virtual joystick control mode
You could use the virtual joystick to control the flight direction of ONAGOfly1 (when
the tilt mode is off).
Always keep your mobile device flat.
Pressing and always hold the tilt mode
button when you use tilt mode to pilot it.
Tilt your mobile device, and your aircraft
will move forward and backward.
Use the turning bar to rotate slide.
● Figure (5) ● Figure (6)
▲
▲
▲
▲
Use the vertical movement bar to make ONAGOfly1 up and down.
▲
Camera parameters can be setup through the App
setting button. You can use your app to record video,
take picture or play back.
You can set the resolution as 1080P/720P/WVGA/VGA
MOV.
You can change video recording/photo mode in
Check that all of the following items are in your package. If any items are missing,
please contact ONAGOfly or your local dealer.
Acumen Robot Intelligence Inc. All right reserved.
ONAGOfly is a registered trademark used by Acumen Robot Intelligence Inc.
A
B
C
D
9
Camera
Notes:
When photographing, please make sure that the is sufficiently charged, and if
aircraft power is fully consumed during recording and photographing, it may cause
video and pictures to be missing. ONAGOfly1 has no legal responsibility for video
and pictures missing due to improper operation.
aircraft
Appendix
Status indicator light of aircraft
When the light at aircraft tail
is winking in blue, it means
that the GPS related functions
work.
When the light at aircraft tail
is winking in green, it means
that the current GPS signal
doesn't support the GPS
related functions.
When all the lights are red, it
means alarm for low battery,
loss of signal and other
abnormal situations.
In the Box
Aircraft body X1
Propeller Pairs X3
Power Cable X2
Charger X1
Quick Start Guide v1.2
When the low power is detected, a notification will be shown on your app.
Please try to make ONAGOfly1 landing.
When the Wifi disconnected or the battery is in extremely low power, it will
landing automatically. (Shown in figure (12)). Please use the ONAGOfly1 within
your eyesight and pay attention to the status of the Wifi signal and the battery
power. When the Wifi signal is extremely weak or the battery power is
extremely low, and in the case there's a danger to land nearby, please pilot the
aircraft to return manually.
Low power warning during flying
8
70%
Normal
GPS
Unlock
Movie Size
LiveView Size
Loop recording
Record Audio
Object Avoid
1080P
720P
WVGA
VGA
the camera setup menu.
You can set the photo resolution in Photo mode.
You can download the Photo/Video in Micro SD card of OANGOfly1 with mobile
device through ONAGOfly App camera roll. You may also use SD card reader to
download all photo/video files to your computer.
This instruction is subject to updated contents without prior notice.
● Figure (8)
● Figure (9) ● Figure (10) ● Figure (11)
▲
▲
▲
▲
▲
▲
▲
-
1
-
2
-
3
-
4
-
5
-
6
