Digital Monitoring Products LT 2273 Reference guide
- Type
- Reference guide
Arm the System
SYSTEM BASICS
All/Perimeter System with Touchscreen Keypad
1
If ENTER CODE displays, present a
credential to the proximity reader, or enter
your user code and tap CMD.
3
2
Tap the shield in the center of the keypad.
If you want to arm only the perimeter, tap
the PERIM icon.
If you want to arm both the perimeter and
the interior, tap the ALL icon.
Local
Weather
Tap Logo to
View Alarm
Company
Contact
Info
Tap Shield
to Arm or
Disarm
Armed Status
and Keypad
Power LED
System Status Prox Reader
Carousel
Menu
Menu Scroll
Arrows
Switch to
Letters
Switch to
Special
Characters
Select
Areas
Go to
Home
Screen
Back Arrow
Command
(CMD)
LT-2273 | 20354 | System Basics: All/Perimeter System with Touchscreen Keypad
© 2020 Digital Monitoring Products, Inc.
Faulted Zones
If a problem with a zone occurs while you try to arm, the zone’s name and a brief description of the
issue are displayed followed by OKAY BYPASS STOP.
▸To force arm the zones before arming, tap OKAY. The system will arm and the zone that is faulted
will become part of the protected area once it returns to a normal state.
▸To bypass the zones before arming, tap BYPASS. The system will arm and the zone that is faulted
will remain bypassed until the next time the system is armed. Panic, emergency, fire, flood
detector, and temperature sensor zones cannot be bypassed.
▸To stop the system from arming, tap STOP. Correct the zone problems, then try to arm again.
Disarm the System
During Normal Operation
▸Real Alarm: Tap NO.
This confirms the alarm and notifies
the monitoring center that a real alarm
is happening. Your security system
stays armed.
▸False Alarm: Tap YES.
This cancels the alarm and sends an
abort message to the monitoring
center. Your security system disarms.
During an Alarm
1Tap the shield in the center of the keypad.
The system displays IS THIS A FALSE
ALARM? NO YES.
At ENTER CODE, present a credential to the
proximity reader, or enter your user code
and tap CMD.
3
2
1
2
Tap the shield in the center of the keypad.
At ENTER CODE, present a credential to the
proximity reader, or enter your user code
and tap CMD.
-
1
-
2
Digital Monitoring Products LT 2273 Reference guide
- Type
- Reference guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Digital Monitoring Products XR 150/550 XR Series Canadian Control Panel User guide
-
Digital Monitoring Products LT 2356 Reference guide
-
Digital Monitoring Products XR Series User guide
-
Digital Monitoring Products LT 2272 Reference guide
-
Digital Monitoring Products XTLtouch User guide
-
Digital Monitoring Products LT 2270 Reference guide
-
DMP Electronics XR550 series User manual
-
Digital Monitoring Products XR500 CAN User guide
-
DMP Electronics XR550 series User manual
-
Digital Monitoring Products XT Series International User guide
Other documents
-
DMP Electronics XTLplus User manual
-
DMP Electronics XR550 series User manual
-
DMP Electronics XR550 series User manual
-
DMP Electronics XR550 series User manual
-
DMP Electronics XR550 series User manual
-
DMP Electronics XR100 User manual
-
DMP Electronics XR100 User manual
-
DMP Electronics XR100 User manual
-
DMP Electronics XT50 User manual
-
DMP Electronics XR100 User manual
