Asgård Secure Store Assembly Instructions

Brand: Asgård

Model: Secure Store

Type: Assembly Instructions

Drill through the four holes in the base of the unit using 6mm dia masonry

drill to a depth of 70mm. Screw in the anchor fixings. (These have a self

cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE

BUILDING to seal the fixing holes from underneath.

TOOLS REQUIRED

Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill, a 13mm

socket spanner and all weather sealent suitable for steel and concete.

SECURE STORE

BASE INSTRUCTIONS

Flat and firm base. Recommended: concrete, tarmac or paving flags.

Min. distance from walls/ shrubbery: 1000mm.

Min. base size (WxDxH) 1600mm x 1000mm x 50mm.

LEVELING THE UNIT

Correctly level the constructed unit using the shims (ZCOMPPLAS)

provided prior to fixing the unit to the ground. Slide the packing pieces

under the corners of the unit base as required until an equal gap has

been achieved around the door allowing for its smooth operation and

alignment.

For maintenance instructions of this product visit www.asgardsss.co.uk

Warning: panels weigh over 20Kg

Beware of manual handling

6mm

Dia.

13mm

Spanner

18V

SEALANT

ZSCREW32 x4

ZSCREW100 x67

ZSCREW340 x18

ZCOMPPLZS02 x4

ZCOMPPLAS22-23-24 x6

2x 2mm, 2x 3mm, 2x 5mm

TOP PANEL 41916 x1

LH SIDE 38003 x1

RH SIDE 38004 x1

RH DOOR 41917 x1

LH DOOR 38020 x1

BASE PANEL 37903 x1

LH BACK PANEL

36971 x1

RH BACK PANEL

37015 x1

COVER PLATE

38031x2

Warning: Please keep

this key card safe! Refer

to if replacement key is

required.

00001

YOUR UNIQUE

KEY CODE

Posi-Driv

Screwdriver

5 6

x2 x13

x14

PLEASE NOTE ALL SCREWS ARE FIXED FROM THE INSIDE

x14 x2

BASE PANEL 37903

RH BACK PANEL 37015

RH SIDE 38004

COVER PLATE 38031

LH BACK PANEL 36971

LH SIDE 38003

7 8

9 10

x18

www.asgardsss.co.uk

41915/07.01.16/KW/REV1

TOP PANEL 041916

RH DOOR 38028

LH DOOR 38020

Asgård Secure Store Assembly Instructions

Asgård Secure Store Assembly Instructions

Asgård Secure Store Assembly Instructions

Related papers

Other documents