MiTAC Tyan S5542 User manual

  • Hello! I am an AI chatbot trained to assist you with the MiTAC Tyan S5542 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
http://www.tyan.com
1
S5542
Version 1.0d
Copyright
Copyright © 2017 MITAC COMPUTING TECHNOLOGY CORPORATION. All rights
reserved. No part of this manual may be reproduced or translated without prior
written consent from MITAC COMPUTING TECHNOLOGY CORPORATION.
Trademark
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
TYAN
®
is a trademark of MITAC COMPUTING TECHNOLOGY CORPORATION.
Intel
®
is a trademark of Intel
®
Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft
®
, Windows
®
are trademarks of Microsoft Corporation.
Nuvoton
®
is a trademark of Nuvoton Technology Corporation.
Notice
Information contained in this document is furnished by MITAC COMPUTING
TECHNOLOGY CORPORATION and has been reviewed for accuracy and reliability
prior to printing. MiTAC assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of TYAN
®
products including liability
or warranties relating to fitness for a particular purpose or merchantability. MiTAC
retains the right to make changes to product descriptions and/or specifications at
any time, without notice. In no event will MiTAC be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
http://www.tyan.com
2
http://www.tyan.com
3
Contents
Before you begin… .................................................................................... 4
Chapter 1: Instruction ................................................................................ 5
1.1 Congratulations ................................................................................. 5
1.2 Hardware Specifications .................................................................... 5
1.3 Software Specifications ................................................................... 18
Chapter 2: Board Installation ................................................................... 19
2.1 Board Image .................................................................................... 20
2.2 Block Diagram ................................................................................. 21
2.3 Mainboard Mechanical Drawing ...................................................... 22
2.4 Board Parts, Jumpers and Connectors ........................................... 23
2.5 LED Definitions ................................................................................ 30
2.6 Installing the Processor and Heat sink ............................................ 33
2.7 Thermal Interface Material .............................................................. 37
2.8 Tips on Installing Motherboard in Chassis ...................................... 38
2.9 Installing the Memory ...................................................................... 40
2.10 Attaching Drive Cables .................................................................. 43
2.11 Installing Add-In Cards .................................................................. 44
2.12 Connecting External Devices ........................................................ 45
2.13 Installing the Power Supply ........................................................... 46
2.14 Finishing Up ................................................................................... 46
Chapter 3: BIOS Setup ............................................................................. 47
3.1 About the BIOS ................................................................................ 47
3.2 Main Menu ....................................................................................... 49
3.3 Advanced Menu ............................................................................... 50
3.4 Chipset Menu .................................................................................. 76
3.5 Security ............................................................................................ 83
3.6 Server Management ........................................................................ 84
3.7 Boot ................................................................................................. 89
3.8 Save & Exit ...................................................................................... 91
Chapter 4: Diagnostics ............................................................................. 93
4.1 Flash Utility ...................................................................................... 93
4.2 AMIBIOS Post Code (Aptio) ............................................................ 94
Appendix: Fan and Temp Sensors........................................................ 101
Glossary ................................................................................................... 105
Technical Support .................................................................................. 111
http://www.tyan.com
4
Before you begin…
Check the box contents!
The retail motherboard package should contain the following:
1 x S5542 Motherboard
2 x SATA Cable
1 x Rear IO Shield
1 x S5542 Quick reference guide
1 x TYAN
®
Driver’s and Utilities DVD
IMPORTANT NOTE:
Sales sample may not come with the accessory listed above.
Please contact your sales representative to help order accessory for your
evaluation.
http://www.tyan.com
5
Chapter 1: Instruction
1.1 Congratulations
You have purchased the powerful TYAN
®
S5542 motherboard, based on the
Intel
®
C232 chipset. The S5542 is designed to support single Intel
®
Xeon E3-
1200 v6/v5 series processor, and up to 64GB of un-buffered ECC UDIMM DDR4
2133/2400MHz memory. Leveraging advanced technology from Intel
®
, the
S5542 is capable of offering scalable 32 and 64-bit computing, high-bandwidth
memory design, and lightning-fast PCI-E bus implementation.
The S5542 not only empowers you in today’s demanding IT environment but also
offers a smooth path for future application upgradeability. All of these rich feature
sets provides the S5542 with the power and flexibility to meet demanding
requirements for today’s IT environments.
Remember to visit the TYAN
®
website at http://www.tyan.com. There you can
find all the information on all TYAN
®
products as well as all the supporting
documentation, FAQs, Drivers and BIOS upgrades.
1.2 Hardware Specifications
TYAN S5542 (S5542G2NR-UHE)
Processor
Socket Type / Q'ty LGA1151, (1)
Supported CPU
Series
Intel Xeon processor E3-1200
v6/v5 product family
Thermal Design
Power (TDP) wattage
Max up to 80W
Chipset
PCH Intel C236
Memory
Supported DIMM Qty (4) DIMM slots
DIMM Type / Speed
Unbuffered ECC UDIMM DDR4
2133/2400
Capacity Up to 64GB
Memory channel 2 Channels
Memory voltage 1.2V
Expansion Slots
PCI-E
(1) PCI-E Gen.3 x16 slot (w/ x8 link),
(1) PCI-E Gen3 x8 slot ( w/ x4 link),
(1) PCI-E Gen.3 x8 slot, (2) PCI-E
Gen.3 x1 slot
LAN
Port Q'ty (2) GbE ports
http://www.tyan.com
6
Controller Intel I210-AT
Storage
SATA
Connector (8) SATA
Controller Intel C236
Speed 6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel
RST)
Graphic
Connector type D-Sub 15-pin
Chipset Intel Processor Graphics(pGFX)
Input /Output
USB
(3) USB2.0 ports (2 via cable, 1
Type-A), (6) USB3.0 ports (4 at rear,
2 via cable)
COM (2) ports (1 at rear, 1 via cable)
VGA (1) D-Sub 15-pin VGA port
RJ-45 (2) GbE ports
SATA (8) SATA-III connectors
PSMI (1) 1x5-pin header
Others (1) Reset button/ (1) Power button
System Monitoring
Chipset Aspeed AST1400
Fan Total (4) 4-pin headers
Temperature
Monitors temperature for CPU &
system environment
Voltage
Monitors voltage for CPU, memory,
chipset & power supply
LED
Over temperature warning
indicator, Fan & PSU fail LED
indicator
Others Watchdog timer support
BIOS
Brand / ROM size AMI, 16MB
Feature
Hardware Monitor, ACPI 5.0,
SMBIOS 3.0/PnP/Wake on LAN,
ACPI sleeping states S3,S4,S5, Boot
from USB device ,PXE via
LAN ,Storage, User Configurable
FAN PWM Duty Cycle, Console
Redirection
Physical Dimension
Form Factor ATX
Board Dimension 12"x9.6" (305x243.8mm)
Regulation
FCC (DoC) Class A
http://www.tyan.com
7
CE (DoC) Yes
Operating Environment
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6 Compliant Yes
Operating System
OS supported list
Please refer to our Intel OS
supported list.
Package Contains
Motherboard (1) S5542 Motherboard
Manual
(1) Web User's manual, (1) Quick
Installation Guide
Installation CD (1) TYAN installation CD
TYAN S5542 (S5542G2NR-UHE-M2)
Processor
Socket Type / Q'ty LGA1151, (1)
Supported CPU
Series
Intel Xeon processor E3-1200
v6/v5 product family
Thermal Design
Power (TDP) wattage
Max up to 80W
Chipset
PCH Intel C236
Memory
Supported DIMM Qty (4) DIMM slots
DIMM Type / Speed
Unbuffered ECC UDIMM DDR4
2133/2400
Capacity Up to 64GB
Memory channel 2 Channels
Memory voltage 1.2V
Expansion Slots
PCI-E
(1) PCI-E Gen.3 x16 slot (w/ x8 link),
(1) PCI-E Gen3 x8 slot ( w/ x4 link),
(1) PCI-E Gen.3 x8 slot, (2) PCI-E
Gen.3 x1 slot
LAN
Port Q'ty (2) GbE ports
Controller Intel I210-AT
Storage
SATA
Connector (7) SATA
Controller Intel C236
Speed 6.0 Gb/s
http://www.tyan.com
8
RAID
RAID 0/1/10/5 (Intel
RST)
M.2 connector
(1)M.2 connector
(2242 only)
Graphic
Connector type D-Sub 15-pin
Chipset Intel Processor Graphics(pGFX)
Input /Output
USB
(3) USB2.0 ports (2 via cable, 1
Type-A), (6) USB3.0 ports (4 at rear,
2 via cable)
COM (2) ports (1 at rear, 1 via cable)
VGA (1) D-Sub 15-pin VGA port
RJ-45 (2) GbE ports
SATA (7) SATA-III connectors
PSMI (1) 1x5-pin header
Others
(1) Reset button/ (1) Power button/
(1) M.2 NGFF connector
System Monitoring
Chipset Aspeed AST1400
Fan Total (4) 4-pin headers
Temperature
Monitors temperature for CPU &
system environment
Voltage
Monitors voltage for CPU, memory,
chipset & power supply
LED
Over temperature warning
indicator, Fan & PSU fail LED
indicator
Others Watchdog timer support
BIOS
Brand / ROM size AMI, 16MB
Feature
Hardware Monitor, ACPI 5.0,
SMBIOS 3.0/PnP/Wake on LAN,
ACPI sleeping states S3,S4,S5, Boot
from USB device ,PXE via
LAN ,Storage, User Configurable
FAN PWM Duty Cycle, Console
Redirection
Physical Dimension
Form Factor ATX
Board Dimension 12"x9.6" (305x243.8mm)
Regulation
FCC (DoC) Class A
CE (DoC) Yes
Operating Environment
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
http://www.tyan.com
9
Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6 Compliant Yes
Operating System
OS supported list
Please refer to our Intel OS
supported list.
Package Contains
Motherboard (1) S5542 Motherboard
Manual
(1) Web User's manual, (1) Quick
Installation Guide
Installation CD (1) TYAN installation CD
TYAN S5542 (S5542GM2NR)
Processor
Socket Type / Q'ty LGA1151, (1)
Supported CPU
Series
Intel Xeon processor E3-1200
v6/v5 product family
Thermal Design
Power (TDP) wattage
Max up to 80W
Chipset
PCH Intel C232
Memory
Supported DIMM Qty (4) DIMM slots
DIMM Type / Speed
Unbuffered ECC UDIMM DDR4
2133/2400
Capacity Up to 64GB
Memory channel 2 Channels
Memory voltage 1.2V
Expansion Slots
PCI-E
(1) PCI-E Gen.3 x16 slot (w/ x8 link),
(1) PCI-E Gen.3 x8 slot, (2) PCI-E
Gen.3 x1 slot
LAN
Port Q'ty
(2) GbE ports + (1) dedicated for
IPMI
Controller Intel I210-AT
PHY
Broadcom BCM5221 PHY
(dedicated for IPMI connection)
Storage
SATA
Connector (6) SATA
Controller Intel C232
Speed 6.0 Gb/s
RAID RAID 0/1/10/5 (Intel
http://www.tyan.com
10
RST)
Graphic
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Chipset Aspeed AST2400
Input /Output
USB
(3) USB2.0 ports (2 via cable, 1
Type-A), (6) USB3.0 ports (4 at rear,
2 via cable)
COM (2) ports (1 at rear, 1 via cable)
VGA (1) D-Sub 15-pin VGA port
RJ-45
(2) GbE ports, (1) Dedicated for
IPMI
SATA (6) SATA-III connectors
PSMI (1) 1x5-pin header
Others (1) Reset button/ (1) Power button
System Monitoring
Chipset Aspeed AST2400
Fan Total (4) 4-pin headers
Temperature
Monitors temperature for CPU &
memory & system environment
Voltage
Monitors voltage for CPU, memory,
chipset & power supply
LED
Over temperature warning
indicator, Fan & PSU fail LED
indicator
Others Watchdog timer support
Server Management
Onboard Chipset Onboard Aspeed AST2400
AST2400 IPMI
Feature
IPMI 2.0 compliant baseboard
management controller (BMC),
Supports storage over IP and
remote platform-flash, USB 2.0
virtual hub
AST2400 iKVM
Feature
24-bit high quality video
compression, 10/100 Mb/s MAC
interface
BIOS
Brand / ROM size AMI, 16MB
Feature
Hardware Monitor, ACPI 5.0,
SMBIOS 3.0/PnP/Wake on LAN,
ACPI sleeping states S3,S4,S5, Boot
from USB device ,PXE via
LAN ,Storage, User Configurable
FAN PWM Duty Cycle, Console
Redirection
http://www.tyan.com
11
Physical Dimension
Form Factor ATX
Board Dimension 12"x9.6" (305x243.8mm)
Regulation
FCC (DoC) Class A
CE (DoC) Yes
Operating Environment
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6 Compliant Yes
Operating System
OS supported list
Please refer to our Intel OS
supported list.
Package Contains
Motherboard (1) S5542 Motherboard
Manual
(1) Web User's manual, (1) Quick
Installation Guide
Installation CD (1) TYAN installation CD
TYAN S5542 (S5542GM4NR)
Processor
Socket Type / Q'ty LGA1151, (1)
Supported CPU
Series
Intel Xeon processor E3-1200
v6/v5 product family
Thermal Design
Power (TDP) wattage
Max up to 80W
Chipset
PCH Intel C232
Memory
Supported DIMM Qty (4) DIMM slots
DIMM Type / Speed
Unbuffered ECC UDIMM DDR4
2133/2400
Capacity Up to 64GB
Memory channel 2 Channels
Memory voltage 1.2V
Expansion Slots
PCI-E
(1) PCI-E Gen.3 x16 slot (w/ x8 link),
(1) PCI-E Gen.3 x8 slot, (2) PCI-E
Gen.3 x1 slot
LAN
Port Q'ty (4) ports + (1) dedicated for IPMI
Controller Intel I210-AT
PHY Broadcom BCM5221 PHY
http://www.tyan.com
12
(dedicated for IPMI connection)
Storage
SATA
Connector (6) SATA
Controller Intel C232
Speed 6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel
RST)
Graphic
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Chipset Aspeed AST2400
Input /Output
USB
(3) USB2.0 ports (2 via cable, 1
Type-A), (6) USB3.0 ports (4 at rear,
2 via cable)
COM (2) ports (1 at rear, 1 via cable)
VGA (1) D-Sub 15-pin VGA port
RJ-45
(4) GbE ports, (1) Dedicated for
IPMI
SATA (6) SATA-III connectors
PSMI (1) 1x5-pin header
Others (1) Reset button/ (1) Power button
System Monitoring
Chipset Aspeed AST2400
Fan Total (4) 4-pin headers
Temperature
Monitors temperature for CPU &
memory & system environment
Voltage
Monitors voltage for CPU, memory,
chipset & power supply
LED
Over temperature warning
indicator, Fan & PSU fail LED
indicator
Others Watchdog timer support
Server Management
Onboard Chipset Onboard Aspeed AST2400
AST2400 IPMI
Feature
IPMI 2.0 compliant baseboard
management controller (BMC),
Supports storage over IP and
remote platform-flash, USB 2.0
virtual hub
AST2400 iKVM
Feature
24-bit high quality video
compression, 10/100 Mb/s MAC
interface
BIOS
Brand / ROM size AMI, 16MB
http://www.tyan.com
13
Feature
Hardware Monitor, ACPI 5.0,
SMBIOS 3.0/PnP/Wake on LAN,
ACPI sleeping states S3,S4,S5, Boot
from USB device ,PXE via
LAN ,Storage, User Configurable
FAN PWM Duty Cycle, Console
Redirection
Physical Dimension
Form Factor ATX
Board Dimension 12"x9.6" (305x243.8mm)
Regulation
FCC (DoC) Class A
CE (DoC) Yes
Operating Environment
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6 Compliant Yes
Operating System
OS supported list
Please refer to our Intel OS
supported list.
Package Contains
Motherboard (1) S5542 Motherboard
Manual
(1) Web User's manual, (1) Quick
Installation Guide
Installation CD (1) TYAN installation CD
TYAN S5542 (S5542WGM2NR)
Processor
Socket Type / Q'ty LGA1151, (1)
Supported CPU
Series
Intel Xeon processor E3-1200
v6/v5 product family
Thermal Design
Power (TDP) wattage
Max up to 80W
Chipset
PCH Intel C232
Memory
Supported DIMM Qty (4) DIMM slots
DIMM Type / Speed
Unbuffered ECC UDIMM DDR4
2133/2400
Capacity Up to 64GB
Memory channel 2 Channels
Memory voltage 1.2V
http://www.tyan.com
14
Expansion Slots
PCI-E
(1) PCI-E Gen.3 x16 slot (w/ x8 link),
(2) PCI-E Gen.3 x1 slot
LAN
Port Q'ty
(2) GbE ports + (1) dedicated for
IPMI
Controller Intel I210-AT
PHY
Broadcom BCM5221 PHY
(dedicated for IPMI connection)
Storage
SAS
Connector
(2) Mini-SAS HD
connectors (totally
support 8 ports)
Controller LSI SAS3008
Speed 12.0 Gb/s
RAID
RAID 0/1/1E/10 (LSI
Integrated RAID)
SATA
Connector (6) SATA
Controller Intel C232
Speed 6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel
RST)
Graphic
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Chipset Aspeed AST2400
Input /Output
USB
(3) USB2.0 ports (2 via cable, 1
Type-A), (6) USB3.0 ports (4 at rear,
2 via cable)
COM (2) ports (1 at rear, 1 via cable)
VGA (1) D-Sub 15-pin VGA port
RJ-45
(2) GbE ports, (1) Dedicated for
IPMI
SAS (2) Mini-SAS HD (4-in-1) connectors
SATA (6) SATA-III connectors
PSMI (1) 1x5-pin header
Others (1) Reset button/ (1) Power button
System Monitoring
Chipset Aspeed AST2400
Fan Total (4) 4-pin headers
Temperature
Monitors temperature for CPU &
memory & system environment
Voltage
Monitors voltage for CPU, memory,
chipset & power supply
http://www.tyan.com
15
LED
Over temperature warning
indicator, Fan & PSU fail LED
indicator
Others Watchdog timer support
Server Management
Onboard Chipset Onboard Aspeed AST2400
AST2400 IPMI
Feature
IPMI 2.0 compliant baseboard
management controller (BMC),
Supports storage over IP and
remote platform-flash, USB 2.0
virtual hub
AST2400 iKVM
Feature
24-bit high quality video
compression, 10/100 Mb/s MAC
interface
BIOS
Brand / ROM size AMI, 16MB
Feature
Hardware Monitor, ACPI 5.0,
SMBIOS 3.0/PnP/Wake on LAN,
ACPI sleeping states S3,S4,S5, Boot
from USB device ,PXE via
LAN ,Storage, User Configurable
FAN PWM Duty Cycle, Console
Redirection
Physical Dimension
Form Factor ATX
Board Dimension 12"x9.6" (305x243.8mm)
Regulation
FCC (DoC) Class A
CE (DoC) Yes
Operating Environment
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6 Compliant Yes
Operating System
OS supported list
Please refer to our Intel OS
supported list.
Package Contains
Motherboard (1) S5542 Motherboard
Manual
(1) Web User's manual, (1) Quick
Installation Guide
Installation CD (1) TYAN installation CD
TYAN S5542 (S5542WGM4NR)
http://www.tyan.com
16
Processor
Socket Type / Q'ty LGA1151, (1)
Supported CPU
Series
Intel Xeon processor E3-1200
v6/v5 product family
Thermal Design
Power (TDP) wattage
Max up to 80W
Chipset
PCH Intel C232
Memory
Supported DIMM Qty (4) DIMM slots
DIMM Type / Speed
Unbuffered ECC UDIMM DDR4
2133/2400
Capacity Up to 64GB
Memory channel 2 Channels
Memory voltage 1.2V
Expansion Slots
PCI-E
(1) PCI-E Gen.3 x16 slot (w/ x8 link),
(2) PCI-E Gen.3 x1 slot
LAN
Port Q'ty (4) ports + (1) dedicated for IPMI
Controller Intel I210-AT
PHY
Broadcom BCM5221 PHY
(dedicated for IPMI connection)
Storage
SAS
Connector
(2) Mini-SAS HD
connectors (totally
support 8 ports)
Controller LSI SAS3008
Speed 12.0 Gb/s
RAID
RAID 0/1/1E/10 (LSI
Integrated RAID)
SATA
Connector (6) SATA
Controller Intel C232
Speed 6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel
RST)
Graphic
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Chipset Aspeed AST2400
Input /Output
USB
(3) USB2.0 ports (2 via cable, 1
Type-A), (6) USB3.0 ports (4 at rear,
2 via cable)
COM (2) ports (1 at rear, 1 via cable)
VGA (1) D-Sub 15-pin VGA port
http://www.tyan.com
17
RJ-45
(2) GbE ports, (1) Dedicated for
IPMI
SAS (2) Mini-SAS HD (4-in-1) connectors
SATA (6) SATA-III connectors
PSMI (1) 1x5-pin header
Others (1) Reset button/ (1) Power button
System Monitoring
Chipset Aspeed AST2400
Fan Total (4) 4-pin headers
Temperature
Monitors temperature for CPU &
memory & system environment
Voltage
Monitors voltage for CPU, memory,
chipset & power supply
LED
Over temperature warning
indicator, Fan & PSU fail LED
indicator
Others Watchdog timer support
Server Management
Onboard Chipset Onboard Aspeed AST2400
AST2400 IPMI
Feature
IPMI 2.0 compliant baseboard
management controller (BMC),
Supports storage over IP and
remote platform-flash, USB 2.0
virtual hub
AST2400 iKVM
Feature
24-bit high quality video
compression, 10/100 Mb/s MAC
interface
BIOS
Brand / ROM size AMI, 16MB
Feature
Hardware Monitor, ACPI 5.0,
SMBIOS 3.0/PnP/Wake on LAN,
ACPI sleeping states S3,S4,S5, Boot
from USB device ,PXE via
LAN ,Storage, User Configurable
FAN PWM Duty Cycle, Console
Redirection
Physical Dimension
Form Factor ATX
Board Dimension 12"x9.6" (305x243.8mm)
Regulation
FCC (DoC) Class A
CE (DoC) Yes
Operating Environment
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating 90%, non-condensing at 35° C
http://www.tyan.com
18
Humidity
RoHS
RoHS 6/6 Compliant Yes
Operating System
OS supported list
Please refer to our Intel OS
supported list.
Package Contains
Motherboard (1) S5542 Motherboard
Manual
(1) Web User's manual, (1) Quick
Installation Guide
Installation CD (1) TYAN installation CD
6 SKU Comparison Table
Part Number
BMC PCH
Expand. slot
SAS
12
Gb/s
SAS
Raid
SATA
6
Gb/s
1G
LAN
USB
3.0
M.2
(NGFF)
X16 / X8 / X4
/ x1
S5542GM2NR Yes C232 1 / 1 / 0 / 2 0
No 6
2 4 0
S5542WGM2NR Yes C232 1 / 0 / 0 / 2 8
Yes 6
2 4 0
S5542GM4NR Yes C232 1 / 1 / 0 / 2 0
No 6
4 4 0
S5542WGM4NR Yes C232 1 / 0 / 0 / 2 8 Yes 6 4 4 0
S5542G2NR-
UHE
No C236 1 / 2 / 0 / 2 0
No 8
2 4 0
S5542G2NR-
UHE-M2
No C236 1 / 2 / 0 / 2 0
No 7
2 4 1
1.3 Software Specifications
For OS (operation system) support, please check with TYAN
®
support for latest
information.
http://www.tyan.com
19
Chapter 2: Board Installation
You are now ready to install your motherboard.
How to install our products right… the first time
The first thing you should do is reading this user’s manual. It contains important
information that will make configuration and setup much easier. Here are some
precautions you should take when installing your motherboard:
(1) Ground yourself properly before removing your motherboard from the
antistatic bag. Unplug the power from your computer power supply and
then touch a safely grounded object to release static charge (i.e. power
supply case). For the safest conditions, MiTAC recommends wearing a
static safety wrist strap.
(2) Hold the motherboard by its edges and do not touch the bottom of the
board, or flex the board in any way.
(3) Avoid touching the motherboard components, IC chips, connectors,
memory modules, and leads.
(4) Place the motherboard on a grounded antistatic surface or on the antistatic
bag that the board was shipped in.
(5) Inspect the board for damage.
The following pages include details on how to install your motherboard into your
chassis, as well as installing the processor, memory, disk drives and cables.
NOTE: Do not apply power to the board if it has been damaged.
http://www.tyan.com
20
2.1 Board Image
S5542
This picture is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above picture.
/