Toro TX 427 and TX 525 Snow Thrower Power Kit, Compact Tool Carrier Installation guide

Brand: Toro

Model: TX 427 and TX 525 Snow Thrower Power Kit, Compact Tool Carrier

Type: Installation guide

FormNo.3441-209RevB

TX427andTX525SnowThrowerPowerKit

CompactToolCarrier

ModelNo.144-2512

InstallationInstructions

Installation

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.Lowertheloaderarms.

3.Shutofftheengineandremovethekey.

4.Openthehoodandsecureitwiththeproprod.

RemovingtheFusePanel

TX525Only

1.Pullthehairpincotterfromthebottomendofthe

hoodprop-rodandslidetheproprodoutofthe

retainingbracketsandtheprop-rodtab.

g004984

Figure1

1.Prop-rodtab4.Retaining

bracket—bottom

2.Retainingbracket—top5.Hairpincotter

3.Proprod

2.Removethe4screwssecuringthefusepanel

andthenpullthepaneloutanduptoremoveit.

g004985

Figure2

1.Fusepanel

2.Screw

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3441-209*

Installingthe12VReceptacle

WARNING

Usingadrillwithoutpropereyeprotectionmayallowdebristoentertheeye,causinginjury.

Whendrillingorcarryingoutotheroperation,alwaysweareyeprotection.

1.Markanddrillahole(1-5/32inchdiameter)intothecontrolinthelocationshowninFigure3orFigure4.

Note:Ifyoudonothavea1-5/32inchdrillbit,usea1-1/8inchdrillbittodrilltheholeandthengrind

theholetoexpandit.

g331119

Figure3

TX427

g331151

Figure4

TX525

2.Removethelockingringfromthe12Vreceptacle.

3.Installthe12Vreceptacleintheholeandsecureitwiththelockingring.

g331165

Figure5

1.Lockingring2.12Vreceptacle

InstallingtheWire

Harnesses

g333594

Figure6

1.WireharnessinstalledonTX4272.WireharnessinstalledonTX525

1.Installthepostconnectorsfromtheportwire

harnesstothepostsonthe12Vreceptacle.

g311406

Figure7

1.Negative(-)connector3.Positive(+)connector

2.Negative(-)post4.Positive(-)post

2.Connecttheportwireharnesstoanoutgoing

powerconnector(endwith2connectors)ofthe

splitterharness.

g331130

Figure8

1.Portwireharness

3.Splitterharness

2.Outgoingpower

connectors

4.Accessoryconnectorof

machinewireharness

3.Connecttheotherendofthesplitterharnessto

anaccessoryconnectoronthemachinewire

harness.

Note:Ifnoconnectorsareopenonthemachine

wireharness,unpluganaccessoryfromthe

machinewireharnessandplugitintotheother

outgoingpowerconnectorofthesplitterharness.

4.FortheTX525,installthefusepanel.

Note:ReversetheprocedureforRemovingthe

FusePanel(page1).

5.Closethehood.

Toro TX 427 and TX 525 Snow Thrower Power Kit, Compact Tool Carrier Installation guide

Toro TX 427 and TX 525 Snow Thrower Power Kit, Compact Tool Carrier Installation guide

Toro TX 427 and TX 525 Snow Thrower Power Kit, Compact Tool Carrier Installation guide

Related papers

Other documents