2. Danfoss
  3. JS1 - H
JS1 - H

Danfoss JS1 - H User guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss JS1 - H User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What type of communication protocol does the Danfoss JS1 - H joystick output?
    What are the available grip-mounted proportional three-point rocker switches on the joystick?
    How many grip-mounted push-button switches can the joystick have?
    What is the range of the Node input?
    What is the Node input used for?
    What is the purpose of the Ext input?
    What is the _NA output indicate?
    What is the _Flt output indicate?
    What is the Out output indicate?
    What is the Curr_NMT_State output indicate?
    What is the EMCY output indicate?
User Manual
PLUS+1® Compliant
JS1 CANopen Joystick Function Block
powersolutions.danfoss.com
Revision history Table of revisions
Date Changed Rev
March 2018 Re-branding 0102
January 2016 First edition 0101
User Manual
PLUS+1® Compliant JS1 CANopen Joystick Function Block
2 |
©
Danfoss | March 2018 AQ00000203en-US0102
JS1_CANopen Function Block
Function Block Inputs..................................................................................................................................................................... 4
Function Block Outputs..................................................................................................................................................................4
Status and Fault Logic.....................................................................................................................................................................7
Boolean Output Signals............................................................................................................................................................7
Proportional Output Signals................................................................................................................................................... 7
Configuration Values.......................................................................................................................................................................8
Function Block Connections.........................................................................................................................................................9
Configuration of Input and Output Buses...............................................................................................................................9
User Manual
PLUS+1® Compliant JS1 CANopen Joystick Function Block
Contents
©
Danfoss | March 2018 AQ00000203en-US0102 | 3
This joystick has a CAN (Controller Area Network) 2.0B output that uses the CANopen communication
protocol.
The JS1 Joystick with CAN is a highly configurable joystick that has:
•
A joystick base with a single three-point Y-axis or with three-point X- and Y-axes.
•
Up to three grip-mounted proportional three-point rocker switches.
•
Up to 24 grip-mounted push-button switches.
Function Block Inputs
JS1_CANopen Function Block Inputs
Input Type Range Description
Node U8 1 to 127 Specifies the CANopen address of the joystick.
All Node addresses on the same CANopen bus must be different. Do not use the same address twice.
The Type code on the joystick label identifies the source address. Typical addresses are C33 (right), C34 (left),
C35 (center), and C36 (auxiliary).
Enter the source address in hexadecimal format as shown in the following examples:
C33 (right) = 0x33
C34 (left) = 0x34
C35 (center) = 0x35
C36 (auxiliary) = 0x36
Ext BOOL —— T = Incoming CAN messages must use 29 bit extended identifiers.
F = Incoming CAN messages must use 11 bit standard identifiers.
CAN —— —— Inputs CAN messages from the joystick. Route this bus to the CAN pin on this function block.
CAN messages sent from the joystick to the function block contain information about the availability of joystick
inputs, joystick input faults, and joystick commands.
Function Block Outputs
JS1_CANopen Function Block Outputs
Output Type Range Description
Status —— —— Outputs a bus that contains the following status signals.
Btn1_NA–Btn24_NA BOOL —— Indicates if an input is available from a grip-mounted push button switch.
T = Not available.
F = Available.
T_NA BOOL —— Indicates if an input from a rotational (theta) axis is available.
T = Not available.
F = Available.
XGrp_NA BOOL —— Indicates if an input from a grip-mounted, X-axis proportional switch is available.
T = Not available.
F = Available.
User Manual
PLUS+1® Compliant JS1 CANopen Joystick Function Block
JS1_CANopen Function Block
4 |
©
Danfoss | March 2018 AQ00000203en-US0102
JS1_CANopen Function Block Outputs (continued)
Output Type Range Description
X_NA BOOL —— Indicates if an input from the joystick’s X-axis is available.
T = Not available.
F = Available.
YGrp_NA BOOL —— Indicates if an input from a grip-mounted, Y-axis proportional switch is available.
T = Not available.
F = Available.
Y_NA BOOL —— Indicates if an input from the joystick’s Y-axis is available.
T = Not available.
F = Available.
Fault —— —— Outputs a bus that contains the following fault signals.
Btn1_Flt–Btn24_Flt BOOL —— Indicates if the input from a grip-mounted push-button switch signal sources has timed
out and switch states are not actively updated.
T = Fault.
F = No fault.
T_Flt BOOL —— Indicates if the input from the joystick’s rotational (theta) axis has a fault or the signal
source has timed out.
T = Fault.
F = No fault.
TimeOut_X BOOL —— Indicates if the function block has not received a CAN PDO or NMT message within the
configured timeout limit after already receiving the message at least once since startup.
When this signal is T, the function block sets all Out signals associated with the missing
PDO message to either 0 or F. It sets all Fault signals associated with the message to T.
When this signal becomes F again, the function block enables all Out signals associated
with the PDO message. It resets all Fault signals associated with the PDO message to F (or
currently fault conditions as detected and reported by the joystick).
T = Message not received within the time limit.
F = Message received within the time limit.
NoMsgReceived_X BOOL —— Indicates if the function block has not received a CAN PDO or NMT message within the
configured timeout limit after never receiving the message since startup.
When this signal is T, the function block sets all Out signals associated with the missing
PDO message to either 0 or F. It sets all Fault signals associated with the message to T.
When this signal becomes F again, the function block enables all Out signals associated
with the PDO message. It resets all Fault signals associated with the PDO message to F (or
currently fault conditions as detected and reported by the joystick).
T = Message not received within the time limit.
F = Message received within the time limit.
XGrp_Flt BOOL —— Indicates if the input from a grip-mounted, X-axis proportional switch has a fault or the
signal source has timed out.
T = Fault.
F = No fault.
X_Flt BOOL —— Indicates if the input from the joystick’s X-axis has a fault or the signal source has timed
out.
T = Fault.
F = No fault.
YGrp_Flt BOOL —— Indicates if the input from a grip-mounted, Y-axis proportional switch has a fault or the
signal source has timed out.
T = Fault.
F = No fault.
Y_Flt BOOL —— Indicates if the input from the joystick’s Y-axis has a fault or the signal source has timed
out.
T = Fault.
F = No fault.
Out —— —— Outputs a bus that contains the following command signals. These signals indicate the
position of each joystick axis and the state of push-button and detent switches.
User Manual
PLUS+1® Compliant JS1 CANopen Joystick Function Block
JS1_CANopen Function Block
©
Danfoss | March 2018 AQ00000203en-US0102 | 5
JS1_CANopen Function Block Outputs (continued)
Output Type Range Description
Btn1–Btn24 BOOL —— Indicates the states of grip-mounted push-button switches.
T = Closed.
F = Open.
Curr_NMT_State U8 0 to 255 Indicates the CANopen communication state of the joystick.
•
0x00 = Boot Up
•
0x04 = Stopped
•
0x05 = Operational
•
0x7F = Pre-operational
Rx_PDOX BOOL —— Indicates when the function block receives a CANopen PDO.
This message reports joystick base and grip proportional signals as well as the state of
grip-mounted button switches.
T = Message received.
F = Message not received.
Rx_Heartbeat BOOL —— Indicates when the function block receives a CANopen Heartbeat or NMT message.
This message reports the current NMT State and provides a continuous heartbeat to
indicate the joystick is alive on the bus.
T = Message received.
F = Message not received.
T_Axis_Psn S16 -10000 to +10000 Indicates the position of the joystick’s rotational (theta) axis.
-10000 = -100%
+10000 = +100%
X_Grp_Psn S16 -10000 to +10000 Indicates the position of a grip-mounted, X-axis proportional switch.
-10000 = -100%
+10000 = +100%
X_Axis_Psn S16 -10000 to +10000 Indicates the position of the joystick’s X-axis.
-10000 = -100%
+10000 = +100%
YGrp_Psn S16 -10000 to +10000 Indicates the position of a grip-mounted, Y-axis proportional switch.
-10000 = -100%
+10000 = +100%
Y_Axis_Psn S16 -10000 to +10000 Indicates the position of the joystick’s Y-axis.
-10000 = -100%
+10000 = +100%
EMCY —— —— Outputs a bus that contains the following status signals. These signals indicate errors and
failure information reported by the joystick.
Error_Code U16 0 to 0xFFFF
Indicates the specific error condition reported for the joystick.
•
0x3110 = Voltage high
•
0x3120 = Voltage low
•
0xFF10 = Not calibrated
•
0xFF20 = Redundancy failure
Error_Register U8 0 to 10000 Indicates what type of error is reported by the joystick.
•
Bit 0 : Generic
•
Bit 1 : Current
•
Bit 2 : Voltage
•
Bit 3 : Temperature
•
Bit 4 : Communication
•
Bit 5 : Device
•
Bit 6 : Reserved
•
Bit 7 : Manufacturer Specific
OccurrenceCounter U8 0 to 127 Indicates number of recorded instances of the error.
User Manual
PLUS+1® Compliant JS1 CANopen Joystick Function Block
JS1_CANopen Function Block
6 |
©
Danfoss | March 2018 AQ00000203en-US0102
JS1_CANopen Function Block Outputs (continued)
Output Type Range Description
SensorIdentifier U8 0 to 255 Indicates the source of the error reported by the joystick.
•
0x80 = X
•
0x81 = Y
•
0x82 = Grip X
•
0x83 = Grip Y
•
0x84 = Grip Theta
Rx_EMCY BOOL —— Indicates when the function block receives a CANopen EMCY message. This message
reports joystick detected failures and fault conditions.
T = Message received.
F = Message not received.
Status and Fault Logic
Use status and fault codes to determine if the function block is operating properly.
Boolean Output Signals
You can change the states of the Status and Fault signals to impact the value of Boolean output signals.
Output Signal Status Signal State Fault Signal State Output Signal Value
Btn1–Btn24 F F T or F
T T F
T F F
F T F
For example:
•
As long as the Status signal and the Fault signal for the Btn1 input are both F, the Btn1 output signal
can be either T or F.
•
As soon as either the Status signal or the Fault signal for the Btn1 input becomes T, the Btn1 output
signal goes to and stays F.
•
When the Status signal and the Fault signal for the Btn1 input are again both F, the Btn1 output
signal returns to its normal T or F operation.
Proportional Output Signals
The states of the Status and Fault signals can change and affect the value of proportional output signals.
Output Signal Status Signal State Fault Signal State Output Signal Value
T_Axis_Psn, XGrp_Psn, X_Axis_Psn, YGrp_Psn, Y_Axis_Psn F F ±10000
T T 0
T F 0
F T 0
For example:
•
As long as the Status signal and the Fault signal for the T_Axis_Psn input are both F, the
T_Axis_Psn output signal ranges ±10000.
•
As soon as either the Status signal or the Fault signal for the T_Axis_Psn input becomes T, the
T_Axis_Psn output signal goes to and stays at 0.
•
When the Status signal and the Fault signal for the T_Axis_Psn input are again both F, the
T_Axis_Psn output signal returns to its normal ±10000 operation.
User Manual
PLUS+1® Compliant JS1 CANopen Joystick Function Block
JS1_CANopen Function Block
©
Danfoss | March 2018 AQ00000203en-US0102 | 7
Configuration Values
The first level inside the function block contains constant values that set the function block’s operating
characteristics.
Typically, you do not have to change any of these values for the correct operation of the function block.
Optionally, you can modify the constant values on this page.
Configuration Values
Input Type Range Description
Timeouts
Heartbeat_Timeout_ms U16
0 to 1000
Heartbeat_Timeout_ms sets the maximum time allowed between received NMT
messages before either Timeout_Heartbeat or NoMsgReceived_Heartbeat is set to
true.
PDO1_Timeout_ms U16
0 to 1000
PDO1_Timeout_ms sets the maximum time allowed between received PDO1 messages
before either Timeout_PDO1 or NoMsgReceived_PDO1 is set to true.
PDO2_Timeout_ms U16
0 to 1000
PDO2_Timeout_ms sets the maximum time allowed between received PDO2 messages
before either Timeout_PDO2 or NoMsgReceived_PDO2 is set to true.
PDO3_Timeout_ms U16
0 to 1000
PDO3_Timeout_ms sets the maximum time allowed between received PDO3 messages
before either Timeout_PDO3 or NoMsgReceived_PDO3 is set to true.
NMT Strt BOOL — Enables the function block to transmit a request to the joystick to enter the operational
state when the joystick is in Boot up or Preoperational state.
User Manual
PLUS+1® Compliant JS1 CANopen Joystick Function Block
JS1_CANopen Function Block
8 |
©
Danfoss | March 2018 AQ00000203en-US0102
Function Block Connections
Item Description
1
Configures the function block to listen for CAN data from the joystick’s network address.
2
Configures the function block to listen for CAN data from Extended or Standard CAN IDs.
3
Determines the CAN port connected to the joystick.
4
Reports CANopen Emergency Object failures detected and reported by the joystick.
5
Reports Not Available state for each signal if connected joystick hardware does not support the function or for all signals if communication
has not yet been established.
6
Reports faults for individual signals or communication timeout.
7
Output bus containing the joystick axis position, proportional grip inputs, and button states.
Configuration of Input and Output Buses
You do not have to change the configuration of either input or output buses to use the function block.
User Manual
PLUS+1® Compliant JS1 CANopen Joystick Function Block
JS1_CANopen Function Block
©
Danfoss | March 2018 AQ00000203en-US0102 | 9
User Manual
PLUS+1® Compliant JS1 CANopen Joystick Function Block
10 |
©
Danfoss | March 2018 AQ00000203en-US0102
User Manual
PLUS+1® Compliant JS1 CANopen Joystick Function Block
©
Danfoss | March 2018 AQ00000203en-US0102 | 11
Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and
electronic components. We specialize in providing state-of-the-art technology and solutions
that excel in the harsh operating conditions of the mobile off-highway market. Building on
our extensive applications expertise, we work closely with our customers to ensure
exceptional performance for a broad range of off-highway vehicles.
We help OEMs around the world speed up system development, reduce costs and bring
vehicles to market faster.
Danfoss – Your Strongest Partner in Mobile Hydraulics.
Go to www.powersolutions.danfoss.com for further product information.
Wherever off-highway vehicles are at work, so is Danfoss. We offer expert worldwide support
for our customers, ensuring the best possible solutions for outstanding performance. And
with an extensive network of Global Service Partners, we also provide comprehensive global
service for all of our components.
Please contact the Danfoss Power Solution representative nearest you.
Local address:
Danfoss
Power Solutions GmbH & Co. OHG
Krokamp 35
D-24539 Neumünster, Germany
Phone: +49 4321 871 0
Danfoss
Power Solutions ApS
Nordborgvej 81
DK-6430 Nordborg, Denmark
Phone: +45 7488 2222
Danfoss
Power Solutions (US) Company
2800 East 13th Street
Ames, IA 50010, USA
Phone: +1 515 239 6000
Danfoss
Power Solutions Trading
(Shanghai) Co., Ltd.
Building #22, No. 1000 Jin Hai Rd
Jin Qiao, Pudong New District
Shanghai, China 201206
Phone: +86 21 3418 5200
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
©
Danfoss | March 2018 AQ00000203en-US0102
Products we offer:
•
Bent Axis Motors
•
Closed Circuit Axial Piston
Pumps and Motors
•
Displays
•
Electrohydraulic Power
Steering
•
Electrohydraulics
•
Hydraulic Power Steering
•
Integrated Systems
•
Joysticks and Control
Handles
•
Microcontrollers and
Software
•
Open Circuit Axial Piston
Pumps
•
Orbital Motors
•
PLUS+1
®
GUIDE
•
Proportional Valves
•
Sensors
•
Steering
•
Transit Mixer Drives
Comatrol
www.comatrol.com
Turolla
www.turollaocg.com
Hydro-Gear
www.hydro-gear.com
Daikin-Sauer-Danfoss
www.daikin-sauer-danfoss.com
/