Minka Lavery 5403-581 Operating instructions

Brand
Minka Lavery
Model
5403-581
Type
Operating instructions

Minka Lavery 5403-581 is a lighting fixture designed for indoor use. It requires a single light bulb, which is not included in the package. The fixture can be mounted on a ceiling and is compatible with standard junction boxes. The installation process involves connecting the electrical wires and securing the fixture to the mounting strap. The fixture has a modern design and is suitable for various indoor settings, including living rooms, bedrooms, and hallways.

Minka Lavery 5403-581 is a lighting fixture designed for indoor use. It requires a single light bulb, which is not included in the package. The fixture can be mounted on a ceiling and is compatible with standard junction boxes. The installation process involves connecting the electrical wires and securing the fixture to the mounting strap. The fixture has a modern design and is suitable for various indoor settings, including living rooms, bedrooms, and hallways.

INSTALLATION INSTRUCTIONS
Item#5403-581
READ AND SAVE THESE INSTRUCTIONS
W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 2
Fig. 1
MOUNTING THE FIXTURE (Fig. 1)
1. Shut off the power at the circuit breaker and remove the old
fixture from the ceiling, including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the parts on a
clear area. Take care not to lose any small parts necessary for
installation.
3. The Mounting Strap (A) contains several pairs of threaded holes,
find the pair of holes that match the holes spacing in your Junction
box Attach the Fixture Mounting Strap (A) to the Junction Box
using the two mounting screws (B size: 8/32*25mm). Tighten the
screws (B) securely with screwdriver..
4. Connect the electrical wires as shown in Fig. 2, making sure that
all wire connectors are secured. If your outlet has a ground wire
(green or bare copper), connect the fixture’s ground wire to it.
Otherwise, connect the fixture’s ground wire directly to the
crossbar using the green screw provided. After wires are
connected, tuck them carefully into the outlet box.
CONNECTING THE WIRES (Fig. 2)
5. Put the fixture horizontal to match the hole both on the Mounting
Strap(A) and fixture body(D) and secure them by threading the
screw(C size: 5/32*12mm) tightly.
FINISHING THE INSTALLATION (Fig. 1)
6. Install the light bulb(s) (not included) in accordance with the
fixture’s specifications. (DO NOT EXCEED THE MAXIMUM
WATTAGE RATING!). (NE PAS DEPASSER LA PUISSANCE
NOMINALE MAXIMALE!)
Your installation is now complete. Return power to the outlet box
and test the fixture.
Note: Illustration (Fig.1) on this manual is for installation
purposes only. It may or may not be identical to the fixture
purchased.
MIN 75 SUPPLY CONDUCTORS
5403-581
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOU
SE
WIRES
Green
(Ground)
Mounting Strap# A-022-280158
- Crossbar
- Ground Screw
- Mounting Screw*2
  • Page 1 1

Minka Lavery 5403-581 Operating instructions

Brand
Minka Lavery
Model
5403-581
Type
Operating instructions

Minka Lavery 5403-581 is a lighting fixture designed for indoor use. It requires a single light bulb, which is not included in the package. The fixture can be mounted on a ceiling and is compatible with standard junction boxes. The installation process involves connecting the electrical wires and securing the fixture to the mounting strap. The fixture has a modern design and is suitable for various indoor settings, including living rooms, bedrooms, and hallways.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents