Airmax TS94362 User manual

Type
User manual
INSTALLATION INSTRUCTIONS
For all PondSeries™ Fountains Systems
Spray Pattern Nozzle
Installation Instructions
Step 1
Unscrew the nozzle nut and remove the
currently installed spray pattern.
If you are running the classic pattern,
no nozzle nut or spray pattern will be
installed.
airmaxeco.com | 866-424-7629
2
2
Step 2
Prior to changing or installing nozzles,
ensure that the Discharge Horn
O-Ring (#651311) is located in the
O-Ring groove.
Warning: Always unplug the unit before any maintenance.
Trumpet Nozzle Shown Here
Step 4
Place the selected nozzle onto the
Discharge Horn and tighten the
nozzle nut.
Please Note: ONLY hand tighten the
nozzle nut. Tools are not required for
this operation.
contactus@airmaxeco.com 3
Step 3 Optional
If your spray pattern requires a Flow
Straightener it will be included with
the pattern.
The Flow Straightener simply drops
into the top of the Discharge Horn
and is held in place by the nozzle and
nozzle nut.
Step 5
Enjoy your newly installed
PondSeries spray pattern!
3
Double Arch & Geyser Nozzle Shown Here
Double Arch & Geyser Shown Here
NOTES
#652124 V1.1
THANK YOU FOR CHOOSING:
Airmax, Inc.
15425 Chets Way Street, Armada, MI 48005
866-424-7629 | www.airmaxeco.com | contactus@airmaxeco.com
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Airmax TS94362 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI