Airmax Fountain Spray Pattern Nozzle User manual

Type
User manual

Airmax Fountain Spray Pattern Nozzle lets you customize the look of your fountain with a variety of spray patterns, including Single Arch, Double Arch, Double Arch & Geyser, and Blossom (Crown & Arch). Installation is easy: simply unscrew the nozzle nut, remove the current spray pattern, and replace it with the new one. The nozzle nut should be tightened by hand only. Some patterns require a Flow Straightener, which is included with the pattern, to be inserted into the top of the Discharge Horn before the nozzle. Enjoy your newly installed spray pattern!

Airmax Fountain Spray Pattern Nozzle lets you customize the look of your fountain with a variety of spray patterns, including Single Arch, Double Arch, Double Arch & Geyser, and Blossom (Crown & Arch). Installation is easy: simply unscrew the nozzle nut, remove the current spray pattern, and replace it with the new one. The nozzle nut should be tightened by hand only. Some patterns require a Flow Straightener, which is included with the pattern, to be inserted into the top of the Discharge Horn before the nozzle. Enjoy your newly installed spray pattern!

INSTALLATION INSTRUCTIONS
For all EcoSeries™, PondSeries®,
and LakeSeries® Fountain Systems
Spray Pattern Nozzle
Double Arch Shown Here
Installation Instructions
Step 1
Unscrew the nozzle nut and remove
the currently installed spray pattern.
If you are running the Classic pattern
for PondSeries fountains, no nozzle
nut or spray plate will be used.
Step 3
If your spray pattern requires a Flow
Straightener, please skip to step 4.
Place the selected nozzle onto the
Discharge Horn and tighten the
nozzle nut.
Please Note: ONLY hand tighten the
nozzle nut. Tools are not required for
this operation.
airmaxeco.com | 866-424-7629
2
Step 2
Prior to changing or installing nozzles,
ensure that the Discharge Horn
O-Ring (#651311) is located in the
O-Ring groove.
Warning: Always unplug the unit before performing any maintenance.
Trumpet Nozzle Shown Here
Discharge Horn O-Ring
Nozzle Nut
Spray Pattern
contactus@airmaxeco.com 3
Step 4
If your spray pattern requires a Flow
Straightener, it will be included with the
pattern.
Spray patterns that require a
Flow Straightener:
Single Arch
Double Arch
Double Arch & Geyser
Blossom (Crown & Arch)
The EcoSeries and PondSeries Flow
Straightener simply drops into the top
of the Discharge Horn. Secure the Flow
Straightener in place by placing the
selected spray pattern nozzle onto the
Discharge Horn and tightening the 4”
nozzle nut.
The LakeSeries Flow Straightener
is also inserted into the top of the
Discharge Horn and is held in place
by the large 6” nozzle nut. The spray
pattern nozzle with 4” nozzle nut
can then be secured onto the Flow
Straightener.
Please Note: ONLY hand tighten the nozzle
nut and nozzle. Tools are not required for
this operation.
Step 5
Enjoy your newly installed spray
pattern!
Double Arch & Geyser Shown Here
PondSeries Flow Straightener Shown Here
LakeSeries Flow Straightener Shown Here
NOTES
#652124 V2
THANK YOU FOR CHOOSING:
Airmax, Inc.
15425 Chets Way, Armada, MI 48005
866-424-7629 | www.airmaxeco.com | contactus@airmaxeco.com
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Airmax Fountain Spray Pattern Nozzle User manual

Type
User manual

Airmax Fountain Spray Pattern Nozzle lets you customize the look of your fountain with a variety of spray patterns, including Single Arch, Double Arch, Double Arch & Geyser, and Blossom (Crown & Arch). Installation is easy: simply unscrew the nozzle nut, remove the current spray pattern, and replace it with the new one. The nozzle nut should be tightened by hand only. Some patterns require a Flow Straightener, which is included with the pattern, to be inserted into the top of the Discharge Horn before the nozzle. Enjoy your newly installed spray pattern!

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI