2. Drive
  3. STDS850
STDS850

Drive STDS850 Installation guide

  • Hello! I have reviewed the user manual for the HT Seatbelt installation. This document provides a clear, step-by-step guide on how to properly install the seatbelt using the rear screws of the upholstery, ensuring a secure fit. I am here to assist with any questions you may have about the installation process.
  • Where should the seatbelt be installed?
    What is the first step in installing the seatbelt?
    Which side of the seatbelt should face up when installing?
8/10/2021
HT SEAT BELT
drivetech.info/drive_mobile/page173.html
1/3
1. The seatbelt will be installed on the rear screws of the seat upholstery.
2. Remove one of the rear screws.
3. Take one end of the seatbelt with the underside facing up.
8/10/2021
HT SEAT BELT
drivetech.info/drive_mobile/page173.html
2/3
4. Insert the end of the set belt between the upholstery and the cross brace.
5. Insert the seat screw through the seat upholstery then the seatbelt. It is important to make sure the screw goes
through the seat stay that is inside the seat upholstery.
6. Install the screw back into the cross brace and tighten.
7. Repeat this procedure on the opposite side of the seat upholstery.
Home
8/10/2021
HT SEAT BELT
drivetech.info/drive_mobile/page173.html
3/3
/