2. RunCam
  3. Helmet
Helmet

RunCam Helmet User guide

  • Hello! I've reviewed the RunCam Helmet Camera user manual and I'm ready to assist you. This document covers the camera's operations, installation methods, and technical specifications. It provides guidance on power usage, recording, WiFi connection and memory card insertion. You will also find information about firmware upgrades and the camera's key features.
  • How do I power on the camera?
    How do I start video recording?
    How do I turn on WiFi?
    Which microSD card is recommended?
HelmetCam
User Manual
Quick Guide
1
Batte Cover
WiFi Button
Flexible Hose
Lens Protective
Switch Button
90° Rotating
Handle
LED Light
Red: Booting / Recording,
Blue: WIFI / Firmware Update
Velcro Bracket
Slider Bracket
Lock Hole (M2.5)
Installation Method 1
Installation Method 2
Camera Rotation
2
Can be twisted and
rotated 90 degrees.
Camera Operations
3
Function
Power On/O
Sta/Stop
Recording
Turn on/Turn
o WiFi
Low Batte
Reminder
Operation
-Push up the switch button to power on, red light
stays on, camera vibrates.
-Push down the switch button to power o, camera
vibrates, all lights turn o.
-Push up the switch button, camera stas recording
automatically after power on, red light ashes slowly,
camera vibrates.
-Push down the DIP switch button, camera vibrates,
stops recording and powers o.
-In power-on state, sho press the WiFi button to
enable WiFi, camera vibrates, red light stays on,
blue light ashes slowly.
-In WiFi state, sho press the WiFi button to disable
WiFi, camera vibrates, red light stays on.
-When the batte is low, the camera vibrates eve 5
seconds, 3 times in total, and automatically powers
o after 5 minutes.
Micro SD Card
Connecting to a Computer
It is recommended to use a U3 card, suppos
up to microSD 128GB card.
Note:
Please handle the microSD card with care when inseing or removing it. Avoid contact
with liquids, dust, and debris. For caution, please turn o the camera before inseing
or removing the microSD card. Please refer to the instructions provided by the microSD
card manufacturer and use it within the acceptable temperature range.
Connect to a computer via Micro USB, it will be
recognized as a USB drive.
Note:
If the camera is not recognized after connecting to the computer, please make sure
there is a microSD card in the camera. If the information on the microSD card cannot
be read properly, please t changing the USB cable or the USB po on the computer.
Firmware Upgrade
To ensure the best peormance of the camera,
please use the latest rmware version.
Refer to:
https://www.runcam.com/download/HelmetCam
Firmware upgrade status (blue light ashes slowly, then rapidly, camera powers
o after the upgrade is complete).
Technical Suppo
Please visit: https://suppo.runcam.com/hc/en-us
4
5
6
7
Camera Specications
8
Model
Image Sensor
Video Resolution
Lens
ISO
Shutter
Video Format
USB
Current
Net Weight
Dimensions
RunCam Helmet Camera
1/2.9” Sensor
1920*1080@60fps
FOV D:155° H:135° V:77°
Auto
Auto
MP4
Type-C
400mA@5V
110g
167*28*50mm
/