Vivitar 8400 User manual

Brand: Vivitar

Model: 8400

Category: Bridge cameras

Type: User manual

This manual is also suitable for

ViviCam 8400 Digital Camera

Owner’s Manual

Windows and the Windows logo are registered trademarks of Microsoft Corporation.

All other trademarks are the property of their respective companies.

Table of Contents

Introduction .......................................................................................................................... 2

Key Features ....................................................................................................................... 2

What your digital video camera includes .............................................................................. 3

Computer System Requirements for Windows XP ............................................................... 3

Computer System Requirement for Windows Vista .............................................................. 4

Computer System Requirements for Macintosh ................................................................... 4

A Quick Look at your Digital Video Camera.......................................................................... 5

Preparing Your Camera for Use ........................................................................................... 6

Inserting an SD Memory Card ............................................................................................ 10

DV Function Control ........................................................................................................... 12

Taking Still Photos ............................................................................................................. 13

Camera Mode Functions .................................................................................................... 16

Capturing Videos ............................................................................................................... 22

Video Mode Functions ....................................................................................................... 25

Playback Mode .................................................................................................................. 28

Playback Mode Functions .................................................................................................. 30

Setup Mode ....................................................................................................................... 37

Install the Vivitar Experience Image Manager Software ...................................................... 44

Connect your camera to the computer ............................................................................... 47

Get photos and videos from your camera to your computer ............................................... 47

Get started! ........................................................................................................................ 49

Transfer media from my camera to my computer manually (Using Windows) ..................... 49

Transfer media from my camera to my computer manually (Using Macintosh) ................... 50

Connect your Digital Camera to a TV ................................................................................. 50

Using your device as a PC Camera (on Windows only) ...................................................... 51

Camera Maintenance ......................................................................................................... 52

Sakar Warranty Card ......................................................................................................... 55

Technical Specifications ..................................................................................................... 56

FAQ – Frequently Asked Questions ................................................................................... 57

Trouble Shooting................................................................................................................ 58

Introduction

Thank you for purchasing the ViviCam 8400 Digital Water Resistant Camera. With

your camera you can take individual photos and shoot video clips. In addition, to

expand the memory capacity of your camera a SD compatible memory card of up to

8GB needs to be inserted.

The camera is water resistant to a depth of 30 feet / 10 meters.

Key Features

 4 modes - Camera, Video, Playback and Set Up.

 Digital Video resolutions – 640x480 (VGA), 320x240 (QVGA).

 5 digital camera resolutions- 8M, 5M, 3M, 2M and 0.3M

 2.4" TFT LCD

 8 X Digital Zoom

 Limited Internal Flash memory

 Supports external SD memory card up to 8GB

 Takes digital photos and videos

 Vivitar Experience Image Manager software for uploading and managing photos

and videos to or from the most popular photo sharing and social network websites.

What your digital video camera includes

 Digital Camera

 USB / AV cable

 Vivitar Experience Image Manager software Installation CD

 Quick Start Guide

 Wrist strap

Computer System Requirements for Windows XP

To be able to download photos and videos to your PC, you will need the following

minimum configuration:

 Pentium 4 processor or above with Windows XP service pack 2

 512 MB RAM, with 100MB of free disk space

 1024 x 768 Recommended screen resolution

 16-bit color or higher display adaptor

 CD-ROM Drive

 QuickTime 6 or higher

 Microsoft Internet Explorer 7 or higher

 Windows Media Player 10 or higher

 Internet connection required

Computer System Requirement for Windows Vista

To be able to download photos and videos to your PC your will need the following minimum

configuration:

 Windows Vista

 800MHz processor and 512 MB of system memory

 20GB hard drive with at least 15GB of available space

 Support for Super VGA graphics

 Available USB Interface

 CD-ROM drive

 QuickTime 6 or higher

 Microsoft Internet Explorer 7 or higher

 Internet connection required

Computer System Requirements for Macintosh

 Macintosh with Intel processor running Mac OS X v10.4.6 or later

 256 MB RAM, 100 MB free disk space

 Display: 1024 x 768 or higher-resolution monitor

 QuickTime 6 or higher

 Internet connection required

A Quick Look at your Digital Video Camera

1: Shutter button

2: Power button

3: Flash strobe

4: Lens

5: Up/Zoom in button

6: Right/Flash button

7: OK/Menu button

8: Playback button

9: Lock device

10: Trip socket

11: Power/charging LED

12: LCD screen

13: Left/Mode button

14: Down/Zoom out button

15：Battery

compartment

16: Memory card

slot

17: Battery cover

18: USB jack

Preparing Your Camera for Use

Battery Installation

Your camera requires 2 “AA” batteries (not included). It is recommended that

alkaline batteries be used.

Important: Before installing the batteries make sure you are

not near water and that your hands are dry.

1. Turn the camera around so that the

battery cover on the side is facing

you.

2. Push the small lock button at the top

of the battery cover (1) to the right to

the unlock position.

3. The battery cover lever (2) will spring

down.

If the lever (2) does not spring down,

then gently pull down the lever to

release the battery door

4. Gently open the battery cover door

from right to left.

5. In order to open the battery

compartment, locate the OPEN

arrow pointing down on the battery

compartment door and press down in

the direction of the arrow.

6. The battery compartment door will

spring up and open.

7. Insert the batteries in accordance

with the polarity + /- indicated on the

inside of the battery compartment.

8. Return and close the battery

compartment cover pressing gently

in a downwards and then an

upwards direction.

9. Now close the battery door from left

to right making sure the top lock is

still in the unlock position.

10. Press and hold the battery door

down as shown in diagram (a).

Gently lift the lever (2) upwards until

you hear it click and lock into place

as in diagram (b). Now push the

middle section of the battery door to

the left as indicated in diagram (c).

a. b.

Important: It is important that the battery cover be sealed

properly before using the camera underwater.

Note:

 As this is a special underwater camera, all the buttons can rotate.

 We strongly recommend downloading your photos and videos regularly to your

computer.

 Remove the batteries from the camera when not in use for an extended period.

 Do not mix alkaline and non Alkaline batteries.

 There are a few features that will not work if the battery power level is low.

 When the battery power is low the battery icon turns red and the camera will

automatically turn off a few seconds later.

For instructions on how to set the date and time that will appear on your photos, set the

language that you want your camera`s menu to appear with or other setup options please

refer to the Setup section later on in this manual.

Inserting an SD Memory Card

Your Digital Camcorder has a limited built-in flash memory. In order to extend this capacity

to capture more photo and video files you can also insert an SD Memory card (up to 8GB)

into the SD slot found in the battery compartment of the camera.

Memory cards are not included and need to be purchased separately.

1. Make sure the camera is turned off before inserting the SD Card.

2. Open the battery cover as well as the battery compartment as explained in steps 1

to 6 of the Battery Installation section above.

3. Locate the SD card slot on the left of the battery compartment.

4. Insert the SD memory card correctly in the direction shown.

5. Press the memory card until you hear a “Click” sound.

6. Close the battery compartment and cover an explained in steps 8 to 10 of the

Battery Installation section above.

Important: It is important that the battery cover be sealed

properly before using the camera underwater.

Note: After you insert an SD memory card, the SD card icon will appear on the bottom left

side of the LCD, indicating that your SD memory card has been installed successfully. The

media you capture will now be stored on the card and not in internal memory.

 This product supports SD cards of up to 8GB.

 Before using the SD card with the camera you should format the card in the camera.

 Formatting will delete all data on the SD Memory Card including protected data.

 Do not remove the SD memory Card during formatting as this may damage the card and

render it unusable.

 Be sure to format the card with the camera.

Format the memory card

It is important to format the memory card the first time you use this digital camera. All data

sitting on the card will be deleted including protected files. Be sure to download important

files to your computer before formatting.

1. Press the Power button to turn on the camera.

2. Press the OK/Menu button to enter the IMAGE mode menu.

3. Press the Right button to select the SETUP mode menu.

4. Press the Down/Zoom Out button to select and highlight the Format option.

5. Press the Right button to open the Format submenu.

6. Press the Up/Zoom In or Down/Zoom Out button to select either “YES” to format

the card or “No” to exit without formatting and then press the OK/Menu button.

7. Press the OK/Menu button to revert back to Camera mode.

DV Function Control

The Power button is situated on the top of the camera.

Power on

Press the Power button to turn on your camera.

The LCD monitor will light up indicating that your camera is ready for use.

Power off

Press the Power button to turn your camera off.

If the camera is not in use or in an operational mode for 60 seconds it will switch off

automatically.

When there is insufficient battery power, a icon will appear on the LCD screen. The

camera will automatically power off a few moments later.

Note: To save battery power, the LCD monitor will automatically turn off if the camera

is inactive for 30 seconds. Press any button other than the power button to turn it on

again.

MODE selection

Press the MODE (left) button to select the camera`s mode – Camera Capture or Video.

By default the Camera mode appears when powering on the camera.

Press the MODE button to switch to the Video mode and again to revert back to the

Camera mode.

Taking Still Photos

After you power on your camera, the default mode is Camera Capture.

The camera icon will now appear on the top left corner of the LCD screen.

Important: The camera`s internal memory is limited to 64MB.

Insert a compatible SD card of up to 8GB to expand the memory and take

many more images.

1. Use the image that appears in the LCD to compose your shot.

2. If need be use the Zoom In / Zoom Out button to focus in on the scene or object

you wish to capture.

3. Hold the camera steady and press the Shutter button on the top of the camera.

Display

Title

Description

Camera Capture

mode

For taking still photos.

Video mode

For recording movie clips.

4. The camera will beep and the picture taken is now saved to the memory.

5. The number of photos that can be taken for each resolution and per the memory

card inserted appears on the top left of the LCD screen.

6. After the shot is taken the number on the left tells you the number of the photo

taken and the number on the right indicated the number of shots left to take at this

resolution.

7. When the camera`s internal memory is full, “Memory Full” will appear on the LCD

screen when you attempt to press the Shutter button to take a photo. Either

download the photos to your computer using the Vivitar Experience Image Manager

software as described below in the section “Transfer photos and videos to your

computer” or insert an SD card to continue taking more photos and videos.

8. The number of photos that can be captured not only depends on the SD card’s

capacity but also on the resolution selected. Better quality photos are taken at

higher resolutions but these will also take up more memory on the card.

9. The screen will power off automatically if the camera is not active for 30 seconds.

Press any key to restart the screen.

10. Do not take the memory card or battery out when camera is saving the image,

otherwise the image won't be saved completely.

Preview and Delete images taken

Press the Playback function button to enter the preview mode to view all the

images captured with the camera.

1. The last image captured will appear first on the LCD.

2. Press the Right (Flash)/Left (MODE) buttons to toggle through the images.

For more information on how to use the Playback mode to view and delete images see

the Playback mode section of this manual.

Flash

The flash feature only operates in Camera mode.

1. Press the Right (Flash) button to activate the flash.

2. The corresponding flash icon will appear on the left side of the LCD.

Auto: Automatically turn on/off according to

the light

Flash on: Force on the flash

Flash off: Force off the flash

3. If the flash is on, when the image is captured and the flash activated the screen will

remain blank while the flash recharges. The next image can only be taken once

the flash has recharged.

4. Using the Flash in bright light environments will cause the image to come out with

the incorrect exposure.

Note: The flash will not work while in Burst Snapshot mode or if the battery power level

is low.

Digital Zoom

You may zoom in or out of the object by using the 8X digital zoom feature.

1. Press the Zoom In function button to zoom into your object.

2. Press the Zoom Out function button to zoom out of your object.

3. The Zoom digits icon appears on the bottom right corner of the LCD.

4. The image on the LCD is affect immediately when the zoom option is pressed.

5. Press the Shutter button to capture the image.

Note: The digital zoom may affect the quality of the image as the higher the zoom

multiple the lower the image quality will be.

You can also zoom in or out of the Photos and Video in Playback mode.

Camera Mode Functions

In Camera mode, press the OK/Menu button on the top right of the camera.

The LCD will display 2 mode tabs – IMAGE and SETUP.

By default the IMAGE tab will open with the menu options for that tab appearing:

Resolution, Quality, White Balance, Color Effect, Exposure, Date Stamp, Self Timer,

and Burst Snapshot

Resolution

1. Press the Down button to select the Resolution mode.

2. Press the Right button for the 5 Resolution options submenu to appear:

8M, 5M, 3M, 2M or 0.3M.

3. Press the Up/Down button to highlight and select the Resolution option you desire.

4. Press the OK/Menu button to confirm and save your choice.

5. Press the OK/Menu button to exit.

6. The icon for the resolution choice appears beneath the camera icon on the left side

of the LCD.

Quality

1. Press the Up/Down button to select the Quality mode.

2. Press the Right button for the 3 Quality options submenu to appear:

Super, Fine, Normal

3. Press the Up/Down button to highlight and select the Quality option you desire.

4. Press the OK/Menu button to confirm and save your choice.

5. Press the OK/Menu button to exit.

6. The icon for the quality choice appears with three, two or one lines on the left side

of the LCD.

Super quality Fine quality Normal quality

White Balance

1. Press the Up/Down button to select the White Balance mode.

2. Press the Right button for the 5 White Balance options submenu to appear:

Auto, Day Light, Tungsten, Fluorescent, and Cloudy

The background of the submenu changes automatically on screen to show the

effect when choosing one of the options

3. Press the Up/Down button to highlight and select the White Balance option you

desire.

4. Press the OK/Menu button to confirm and save your choice.

5. Press the OK/Menu button to exit.

6. The icon for the White Balance choice appears on the left side of the LCD.

Color Effect

1. Press the Up/Down button to select the Color Effect mode.

2. Press the Right button for the 3 Color Effect options submenu to appear:

Color, Sepia and Monochrome

The background of the submenu changes automatically on screen to show the

effect when choosing one of the options

3. Press the Up/Down button to highlight and select the Color Effect you desire.

4. Press the OK/Menu button to confirm and save your choice.

5. Press the OK/Menu button to exit.

6. The Color Effect choice appears on the LCD.

Page is loading ...

Vivitar 8400 User manual

Brand: Vivitar

Model: 8400

Category: Bridge cameras

Type: User manual

This manual is also suitable for

Download PDF

report

Vivitar 8400 User manual

This manual is also suitable for

Vivitar 8400 User manual

Related papers

Other documents