2. Computers & electronics
  3. Computer components
  4. System components
  5. Peripheral controllers
  6. Acer
  7. Altos Array G540 SAS controller

Acer Altos Array G540 SAS controller, SO.SA000.A00 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Acer Altos Array G540 SAS controller Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1 2
The first thing to do is to check the position of the jumper JP3. It must
be short pins 2-3, as shown in the picture below.
Plug the card into the horizontal white connector, close to the
Green PCI-X slot and then secure it to the mainboard with a
screw.
All the How To guides can be found on http://support.acer-euro.com/documents/howto/
SO.SA000.A00 - Altos Array G540 SAS controller, SAS 8 ports. Support RAID 0,1, Daughterboard
plus cables, does not take PCI slots
How To add the SAS controller
3
Plug the first SAS Cage cable into the bottom
connector.
4
Please download the latest firmware and bios
from the Acer support website and upgrade
the card.
http://support.acer-euro.com
46.SA000.A01
/