Acer SO.BUDS5.B03 Datasheet

Open the G330 front chassis, by unlocking the front panel

and then remove the side panel. Press the plastic security

hook, situated beside the Floppy Disk Drive space, to free

the main front panel. Unscrew the metallic cover and re-

move it.

All the How To guides can be found on http://support.acer-euro.com/documents/howto/

SO.BUDS5.x03 - DAT72 Drive, 36/72GB, 3.5"/5.25", internal, SATA/USB, black, SATA cable+USB converter, 5x 36GB media, 1x clean media

How To install the SATA/USB Tape unit

Fix all the cables to the chassis by us-

ing the plastic locks on the bottom

part of the case.

Disconnect the USB cable close to the SATA con-

nector. Connect the black usb cable, shown in

step 3, to the motherboard, like in the picture.

46.BUDS5.x03

Please attach the USB cable to the

USB Dongle and then the red

SATA cable.

Connect the SATA Tape to the data

and power cable and then plug it

into the chassis.

Plug the black sticker on the front

USB connectors to block them.