2. JIECANG
  3. Venetian
Venetian

JIECANG Venetian User manual

  • Hello! I am an AI chatbot trained to assist you with the JIECANG Venetian User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
JCV
AC Motor
24
24:φ25mm
S
S:Standard
AE
AE:with adapter supply
D
Dual driving
W
W:external Wi-Fi module
08
Torque:0.8N.m
30
Speed: 30Rpm
RF Control Inactive
Hold Pairing button for 6s, jog
twice to show the motor RF
control is inactive; Hold Pairing
button for 2s, the RF control is
active again.
Module connection wire
Venetian Blind Wi-Fi Motor
User Manual
01 Product Info
b.Direction Reverse
a.Pairing Motor with Controller
02 Installation 05 Instructions
03 Power Options
04 Caution!
f.Hot key to the Fav. Position
e.Setting and Cancelling Favorite Position
d.One-touch/Constant-touch Mode
c.Upper&Lower Limits Setting
Reset
adapter 12V/2A,power box 12V/1A.
12V/1A
Note: The Fav.position setting only can be done alter upper&lower limits set.
Note: Pairing can not be done under group channel or 0 channel.
Adapter
Adapter DC12V/2A
After motor is powered on for more than 10s
insert Wi-Fi module to motor module connection wire
venetian blind.
*Connection requirement
a. Make sure the Wi-Fi module and smart phone be connected to the same Wi-Fi network.
b. The smart phone needs to connect to Wi-Fi network and turn on the Bluetooth function
first.
Wi-Fi
Wi-Fi
1.Add controller
2.Poke Pairing button x2s to
activate motor
i.Removing Controllers
h.Adjusting Motor Speed
g.Adjusting Upper & Lower Limits
j.Cancelling Limits
06 Installation & Connecting to external Wi-Fi module network
① Download APP
② Add Device
07 Troubleshooting
Wi-Fi
Wi-Fi
Remove controller B via pre-existing controller A
Remove a single controller
Controller B removed
Limits cancelled
Adjust Lower limit
Note: If motor doesn't jog, the max/min speed has already been reached.
There are 3 speeds adjustable.
Note: All the settings are saved even controllers removed(limits set are saved).
Controller A/B are already paired to motor.
Note: It is forbidden to run the motor if installed into the shade without limits.
Limits should be set immediately to protect the shade.
/