GVS T-PS01 Series User manual

Brand: GVS

Model: T-PS01 Series

Category: Door intercom systems

Type: User manual

GVS T-PS01 Series is a power supply for video intercom systems that provides the power for the entire system. It has multiple bus interfaces for connecting to the indoor and outdoor stations, and AC ports for connecting to the power source. The power supply also has LED indicators to show the status of the system, such as whether it is receiving data or if there is a backup power supply. The GVS T-PS01 Series is a reliable and efficient power supply that is essential for any video intercom system.

User Manual_T series

T-OS01/T-IS01

T-PS01

Catalog

Overview ..................................................................................................................................... 1

Product Introduction .................................................................................................................. 2

Indoor Station Appearance ................................................................................................2

Indoor Station Size ..............................................................................................................4

Interface Instruction of Indoor Station ..........................................................................5

Indoor Station Specification .............................................................................................6

Outdoor Station Appearance ............................................................................................7

Outdoor Station Size ......................................................................................................... 10

Interface Instruction of Outdoor Station ..................................................................... 11

Outdoor Station Specification .......................................................................................... 12

Power Supply Appearance ............................................................................................... 13

Power Supply Size ......................................................................................................... 15

Interface Instruction of Power Supply ........................................................................ 16

Power Supply Specification .............................................................................................. 16

System Connection .......................................................................................................... 17

Indoor Station-Basic Function & Settings .............................................................................. 18

Standby Interface .............................................................................................................. 18

Visitors’ intercom .............................................................................................................. 19

Monitor .............................................................................................................................. 21

Call Out ............................................................................................................................. 22

Message .............................................................................................................................. 23

Indoor Station Setting .............................................................................................................. 25

Ring Setting ....................................................................................................................... 25

Time setting ....................................................................................................................... 25

Language setting ............................................................................................................... 26

Advanced Setup ................................................................................................................ 26

Outdoor Station Settings .......................................................................................................... 29

Default Setting................................................................................................................... 29

Register Card Settings ...................................................................................................... 29

Unlock time setting ........................................................................................................... 30

ADD Setting ...................................................................................................................... 30

Installation ................................................................................................................................ 31

Where to install the outdoor station: ............................................................................... 31

How to install outdoor station: ........................................................................................ 32

Where to install the indoor station .................................................................................. 33

How to install indoor station: ........................................................................................... 34

Overview

This product is a video intercom system based on two wire analog solution, the system

uses two core wire to connect power supply, the outdoor station and indoor station. The

functions are as below:

 Visual Intercom, Unlock;

 Monitor;

 4 indoor station in 1 house;

 Intercom through the system’s unit;

 TF card storage, screenshot and video record;

 Support KNX home automation

Product Introduction

Indoor Station Appearance

Model：T-IS01-W L

Model：T-IS01-W H

Model：T-IS01-W L

Model：T-IS01-W H

Indoor Station Size

Model：T-IS01-W L

Model：T-IS01-W H

Interface Instruction of Indoor Station

②

①

③

④

①：

BUS1-A BUS1-B：Bus Port 1；

BUS2-A BUS2-B：Bus Port 2；

EXT-DC24V GND：Auxiliary Power Supply 24V；

GND DoorBell：Interface of doorbell button；

②：

1：Setting on Master-Slave devic；

2：Impedance matching of video terminal；

③：Doorbell port；

④：485 Expansion interface；

Note:

①When impedance matching the video terminal of the last indoor station device, please

turn “2” on.

②The bus port A & B are used for connecting the indoor station.

③The master indoor station rings and screen wake up when it’s called in, but slave device will only ring but

not screen wake up.。

Indoor Station Specification

Working Voltage：DC 24~32V

Idle current：≤ 10 mA (DC 32V)

Working current：≤ 200 mA (DC 32V)

Screen：7 inches TFT

Resolution：800 * 480

TF Card: 2~32G (Class 10 preferred)

Dimension (L * W * D)：220 * 140 * 24 mm

Outdoor Station Appearance

Note:

These models are for IC card only.

Model：T-OS01-S-IC-01

Model: T-OS01-S-IC-02

Model：T-OS01-S-IC-04

Model：T-OS01-S-IC-01

Model：T-OS01-S-IC-02

Note: The Call button are related to different indoor station, please refer to the indoor station settings.

Model：T-OS01-S-IC-04

Outdoor Station Size

Note：The above image is based on T-OS01-S-IC-02, the other models are the same size.

Interface Instruction of Outdoor Station

①：

BUS-A 、BUS-B：Bus Port；

NO、 COM 、NC ：Normal on/off port；

GS ：Door status checking；

DOOR SW：Unlock inside；

GND ：Public Area；

②：

Unlock timing settings, details in page 30

③：

Outdoor Station ADD Settings, details in

page 30

①

②

③

Outdoor Station Specification

Working voltage：DC 24~32V

Idle current：≤ 25 mA (DC32V)

Working current：≤ 150 mA (DC32V)

Camera type：CMOS PAL

Camera pixel：30W

Visual angle：90°

Fill-in light：White light

Size (L*W*D): 120 * 194 * 44.7 mm

Power Supply Appearance

Model：T-PS01

Front Side:

Back Size:

Power Supply Size

Interface Instruction of Power Supply

BUS1、BUS2、BUS3：Bus Interface；

L、N、 :AC Port；L connect Live wire，N connect null wire，connect earth wire.

Note:

① The left red light will flash while the working in the bus line.

② The middle green light will be on while working, and flash while receiving date signal.

③ The right green light is for back up use

Power Supply Specification

Working input voltage：AC 90V ~ 255V 50/60Hz

Output voltage：DC 30V

Rated powert：30W

Size (L*W*D): 144 * 90 * 64 mm

Page is loading ...

GVS T-PS01 Series User manual

Brand: GVS

Model: T-PS01 Series

Category: Door intercom systems

Type: User manual

Download PDF

report

GVS T-PS01 Series User manual

GVS T-PS01 Series User manual

Other documents