Videotron DIR825 Quick Setup Manual

  • Hello! I have analyzed the provided user guide for the Wi-Fi Router INTC-GDB-DLINK-001-1104, which covers initial setup, optimal placement, and basic installation steps. This document also mentions it is a dual-N band router. I'm prepared to answer your questions related to this router setup process.
  • Where should I place my Wi-Fi router for the best wireless coverage?
    What is the first step for installation?
document : INTC-GDB-DLINK-001-1104
format: 5.125 po x 5.125 po
CMYK
PANTONE :
vérification :
• images HR
• format
• typos
• épreuve
• correction
• final
logiciel :
• Indesign CS4
• Photoshop CS4
• Illustrator CS4
• Quark 7
01
WI-FI ROUTER
QUICK SETUP GUIDE
INTC-GDB-WIFI-001-1104
WI-FI ROUTER
INTC-GDB-WIFI-001-1104.indd 1 12/04/11 4:06 PM
WI-FI WIRELESS CONFIGURATION
To get the best wireless coverage, place your router in an open area away from your
computer, monitor, and speakers. When the router is positioned, use the reference diagram
below to adjust your antennas. Since each house is different, you may need to try several
different antenna configurations to get the best coverage.
Use one of the following antenna configurations
for optimal wireless performance.
HORIZONTAL
front view
VERTICAL
front view
• On your computer, launch the Wireless Network Wizard.
Choose one of the two Wi-Fi networks indicated under the router, usually
« VideotronXXXX » (2.4GHz) or « VideotronXXXX_Media » (5GHz).
The Wireless Network Wizard will prompt you for the network key. Enter the network key
exactly as it is printed under the router.
Repeat this process for every Wi-Fi computer or device that you want to connect to
the Internet.
Need help? Call us at 1-888-433-6876, 24 hours a day, 7 days a week. For further
information, go to our online support section at support.videotron.com.
INTC-GDB-WIFI-001-1104.indd 6 12/04/11 4:06 PM
INSTALLATION
Disconnect the power supply from the cable modem (A).
• If there is a computer already connected to the cable modem, disconnect it.
Use an Ethernet cable to connect the cable modem (B) to the grey port at the back of the
router labelled Internet (D).
Use another Ethernet cable to connect the network port on the computer to the first blue
port at the back of the router labelled LAN (C).
Plug in the cable modem’s power supply cord (A).
Connect the power supply unit to the POWER terminal at the back of the router (E),
then plug the power supply unit into an electrical outlet.
Wait until the Earth icon on the front of the router is lit or flashes blue.
If there is a reset button on the modem, press it.
Start the computer and open the browser.
computer
C D E
router
A B
modem
INTC-GDB-WIFI-001-1104.indd 7 12/04/11 4:06 PM
EXCLUSIVE TO VIDEOTRON INTERNET CUSTOMERS
TECHNICAL SUPPORT, CONFIGURATION AND REMOTE
DIAGNOSIS AVAILABLE 24 HOURS A DAY, 7 DAYS A WEEK.*
VISIT OUR FAQ SECTION AT VIDEOTRON.COM
CUSTOMER SERVICE
1-888-433-6876
BUSINESS SERVICE
1-800-561-4248
WI-FI ROUTER
DUAL-N BAND
* For more information about Wi-Fi router support, visit www.videotron.com/wifi-router/support
BOX CONTENTS
• Router
• 2 antennas
• Ethernet cable
• Power connector
• Quick start guide
INTC-GDB-WIFI-001-1104.indd 8 12/04/11 4:06 PM
/