Auralex ProMAX™ v2 User guide

Brand
Auralex
Model
ProMAX™ v2
Type
User guide
Installation & User Guide
Installation & User Guide
Auralex® Acoustics, Inc.
1-800-959-3343 | 317-842-2600 | Auralex.com
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
Auralex® Acoustics, Inc.
1-800-959-3343 | 317-842-2600 | Auralex.com
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
ProMAX™ v2
ProMAX™ v2
964-213.ProMAX v2 User Guide (03/05/2020 - 1:04 PM)
964-213.ProMAX v2 User Guide (03/05/2020 - 1:04 PM)
Thank you for purchasing the Auralex® Acoustics ProMAX v2.
™ This is a highly effective portable acoustic
absorption device that can be easily positioned anywhere in a room to achieve the desired effect.
Thank you for purchasing the Auralex® Acoustics ProMAX v2.
™ This is a highly effective portable acoustic
absorption device that can be easily positioned anywhere in a room to achieve the desired effect.
➌ Insert tube into the hole in the center
of the ProMAX v2 panel. Assistance is
recommended.
➌ Insert tube into the hole in the center
of the ProMAX v2 panel. Assistance is
recommended.
➍ Orient the foam side towards you to absorb acoustical reflections. Position
the angled / reflective side of the ProMAX v2 facing you to redirect acoustical
energy relative to your listening position to achieve the desired effect.
When using the reflective side the panel’s overall angle can be adjusted by
rotating it on the stand. When using pairs of ProMAX v2s flanking the listening
position, orient the angled reflective surfaces in the same manner for a balanced
image and soundstage. To reverse the orientation of the angled surfaces swap
the panel positions from one side of the listening position to the other.
➍ Orient the foam side towards you to absorb acoustical reflections. Position
the angled / reflective side of the ProMAX v2 facing you to redirect acoustical
energy relative to your listening position to achieve the desired effect.
When using the reflective side the panel’s overall angle can be adjusted by
rotating it on the stand. When using pairs of ProMAX v2s flanking the listening
position, orient the angled reflective surfaces in the same manner for a balanced
image and soundstage. To reverse the orientation of the angled surfaces swap
the panel positions from one side of the listening position to the other.
➋ Remove star washer from the top of
the stand.
➋ Remove star washer from the top of
the stand.
➊ Set up stand and extend the top tube.
Firmly tighten the pole into the base.
Extend the top tube and firmly tighten
the adjustment collar.
➊ Set up stand and extend the top tube.
Firmly tighten the pole into the base.
Extend the top tube and firmly tighten
the adjustment collar.
  • Page 1 1

Auralex ProMAX™ v2 User guide

Brand
Auralex
Model
ProMAX™ v2
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents