2. Stonco
  3. Slim Flood LED (TF)

Stonco Slim Flood LED (TF), Slim Flood LED TF Install Instructions

  • Hello, I'm your chat assistant and I'm ready to help you with the installation of your Stonco Slim Flood LED fixtures. I've reviewed the installation instructions and I can provide information on proper wiring, mounting, and weatherproofing, as well as answer other questions based on the document.
  • Does this luminaire include a splice box?
    What should I do before installing the fixture?
    What should I use to weatherproof the fixture?
Install according to the National Electrical Code.
NOTE: This luminaire does not include a splice box.
Make sure power is turned off during installation.
1. Connect wiring.
2. Attach luminaire by trunion to a secure junction
box, frame or structure. If box will be remote,
remove mounting nut connector and secure the
luminaire with bolts.Integrity of the box, frame or structure is the installer's responsibility.
3. Aim luminaire as desired before fully tightening mounting hardware.
TRUNNION MOUNT
Wall
Ceiling
Ground
Fasten the Bolt
Combination
Bolt
30W10W 50W
88 8
81.8 8
Torque(Nm)
Fasten the Bolt
Combination Bolt
/