2. ROOMS TO GO
  3. 73063124

ROOMS TO GO 73063124 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the MONTARA Cocktail Table. This document provides a detailed parts list and a step-by-step guide to assemble the product, including warnings about cleaning. I'm ready to answer any questions you have about this table.
  • What should I do if parts are missing or damaged?
    What liquid should I use to clean the table?
    How many people are needed for the final step of assembly?
SKU#73063124
Bolt
(M6*20)
Part List
NO. SKETCH DESCRIPTION QTY NO. SKETCH DESCRIPTION QTY
A
B
C
2
2
AA
12
GLA-63127-2648WKD
Made in China
1
D
1
1
4
12
12
Foot Glider
BB
CC
DD
(Φ14*Φ6.5*1.5)
Steel Washer
Bolt cap
Wrench
Leg
Support tube
Table Top
Assembly Instructions
Do Not Attempt Assembly If Any Parts Are Missing Or Damaged.
Identify all parts packed in the carton against the parts list. Remove all protective
materials. Place parts on a non-abrasive surface to avoid scratching.
Warning: Please do not use acid or alkaline washing liquid to clean the product.
Assemble the product as shown below, step-by-step.
JWUA
MONTARA COCKTALL TABLE
STEP 2
2
STEP 1
Hand tighten nut 3-4 revolutions only,Do not tighten all the bolts and nuts.
Hand tighten nut 3-4 revolutions only,Do not tighten all the bolts and nuts.
BB
AA
CC
AB
B
A
BB
AA
CC
B
A
B
A
C
STEP 3
3
Need two people turn the Table right side up.Adjust the pre-installed foot
glider(D) at the end of each Table leg until the Table is level with the ground
Securely, Your Table is ready for use.
B
C
D
A
/