2. ROOMS TO GO
  3. 73363120

ROOMS TO GO 73363120 Assembly Instructions

  • I have reviewed the assembly instructions for the Montara End Table, model 73363120. The document provides a detailed parts list and step-by-step guidance, which includes how to assemble the legs, support tubes, and tabletop, as well as how to use the foot gliders. I'm ready to assist with any questions you may have about assembling your end table.
  • What should I do before starting assembly?
    What should I do if parts are missing or damaged?
    What should I avoid when cleaning the assembled product?
SKU#73363120
Bolt
(M6*20)
Part List
NO. SKETCH DESCRIPTION QTY NO. SKETCH DESCRIPTION QTY
A
B
C
2
2
AA
12
GLA-63127-2222HKD
Made in China
1
D
1
1
4
12
Foot Glider
BB
CC
DD
(Φ14*Φ6.5*1.5)
Steel Washer
Bolt cap
Wrench
Leg
Support tube
Table Top
Assembly Instructions
Do Not Attempt Assembly If Any Parts Are Missing Or Damaged.
Identify all parts packed in the carton against the parts list. Remove all protective
materials. Place parts on a non-abrasive surface to avoid scratching.
Warning: Please do not use acid or alkaline washing liquid to clean the product.
Assemble the product as shown below, step-by-step.
JWUA
MONTARA END TABLE
12
A
A
B
B
BB
AA
CC
A
B
B
A
C
BB
AA
CC
STEP 2
2
STEP 1
Hand tighten nut 3-4 revolutions only,Do not tighten all the bolts and nuts.
Hand tighten nut 3-4 revolutions only,Do not tighten all the bolts and nuts.
C
STEP 3
3
A
B
Need two people turn the Table right side up.Adjust the pre-installed foot
glider(D) at the end of each Table leg until the Table is level with the ground
Securely, Your Table is ready for use.
D
/