ROOMS TO GO 74066121 Assembly Instructions

Assembly Instructions

Identify all parts packed in the carton against the parts list. Remove all protective

materials. Place parts on a non-abrasive surface to avoid scratching.

Do Not Attempt Assembly If Any Parts Are Missing Or Damaged.

Warning: Please do not use acid or alkaline washing liquid to clean the product.

Assemble the product as shown below, step-by-step.

Part List

NO. SKETCH DESCRIPTION QTY

Bolt

(M6*20)

BB Wrench 1

STEP 1

Hand Tighten Nut 3-4 Revolutions Only,After Attached All The Bolts,Adjust All

The Part At Correct Position,Then Tighten All The Bolt And Nut.Do Not Over

Tighten.

GL2AQ-38727-145

Made in China

NO.

SKETCH

DESCRIPTION

Leg

Table Top

QTY

Foot Glider

STEP 2

Need two people turn the table right side up.Adjust the pre-installed foot glider(C)

at the end of each table leg until the table is level with the ground Securely, Your

table is ready for use.