2. Rhino Rack
  3. HD-FK13

Rhino Rack HD-FK13 Operating instructions

  • Hello! I've reviewed the instructions for the RHINO-RACK HD-FK13 Shovel Bracket, which is designed for use with 43218 shovel brackets. The document explains the required hardware, including M6 screws and nuts, and references the 42318 hardware kit for spring and flat washers. I'm ready to answer your questions about this product.
  • What is HD-FK13 intended for?
    What hardware is required for installation?
    Where can I find the M6 spring and flat washers?
Item Component Name Qty Part No.
1 M6 x 20mm Hex Screw 4 B082
2 M6 Channel Nut 4 N002
1.
Issue: 01 Document No: R1350 Prepared: Kayle Everett
HD-FK13
Note:
HD-FK13 is intended
for use with 43218
shovel brackets.
* M6 spring and fl at
washers found in the
42318 hardware kit. 2.
*
*
Item Component Name Qty Part No.
1 M6 x 20mm Hex Screw 4 B082
2 M6 Channel Nut 4 N002
1.
Issue: 01 Document No: R1350 Prepared: Kayle Everett
HD-FK13
Note:
HD-FK13 is intended
for use with 43218
shovel brackets.
* M6 spring and fl at
washers found in the
42318 hardware kit. 2.
*
*
Item Component Name Qty Part No.
1 M6 x 20mm Hex Screw 4 B082
2 M6 Channel Nut 4 N002
1.
Issue: 01 Document No: R1350 Prepared: Kayle Everett
HD-FK13
Note:
HD-FK13 is intended
for use with 43218
shovel brackets.
* M6 spring and fl at
washers found in the
42318 hardware kit. 2.
*
*
Item Component Name Qty Part No.
1 M6 x 20mm Hex Screw 4 B082
2 M6 Channel Nut 4 N002
1.
Issue: 01 Document No: R1350 Prepared: Kayle Everett
HD-FK13
Note:
HD-FK13 is intended
for use with 43218
shovel brackets.
* M6 spring and fl at
washers found in the
42318 hardware kit. 2.
*
*
Item Component Name Qty Part No.
1 M6 x 20mm Hex Screw 4 B082
2 M6 Channel Nut 4 N002
1.
Issue: 01 Document No: R1350 Prepared: Kayle Everett
HD-FK13
Note:
HD-FK13 is intended
for use with 43218
shovel brackets.
* M6 spring and fl at
washers found in the
42318 hardware kit. 2.
*
*
Item Component Name Qty Part No.
1 M6 x 20mm Hex Screw 4 B082
2 M6 Channel Nut 4 N002
1.
Issue: 01 Document No: R1350 Prepared: Kayle Everett
HD-FK13
Note:
HD-FK13 is intended
for use with 43218
shovel brackets.
* M6 spring and fl at
washers found in the
42318 hardware kit. 2.
*
*
CONTROLLED
CONTROLLED
CONTROLLED
CONTROLLED
CONTROLLED
CONTROLLED
/