LILIN AHD DOME IR CAMERA User manual

Category
Security cameras
Type
User manual
Instruction Manual
Part Description & Dimensions
AHD DOME IR CAMERA
66-AHD664ACSE-1
1. Please use the enclosed hexagon screwdriver to loosen the 3 screws on the
cover (FIG.1).
Installation
2. Secure the safety rope onto the bottom chassis (FIG.2). Then tighten the truss
head screws (M4.0x25), on which the O rings are put (FIG.3), on the 4 mounting
holes of the bottom chassis (FIG.4). Secure the bottom chassis to the desired
location.
4. Adjust the pan, tilt and azimuth of the camera to the desired location (FIG.7).
7. Connect to an Up-the-Coax (UTC) digital recorder that supports AHD-Coaxial
protocol. Then use the 8-directional buttons (FIG.10) to adjust settings for the
best images.
.
SET
UP
DOWN
RIGHTLEFT
7- 1. USER OSD SETTING
   A.  (UP)
   B.  (LEFT)
   C.  (RIGHT)
   D.  (DOWN)
   E. SET : Executes selections and d is pl ay s a submenu f or an item
      with the   mark. 
: Press to move t he cursor upwards o r to select items.
: Press to move t he cursor to th e left and to s el ec t or
adjust the parameters o f the selected it em .
The p ar am et er s changes each time t hi s button is
pressed.
: Press to move t he cursor to th e right and select or
adjust the parameters o f the selected it em . The
parameters changes each t im e this button i s pressed.
: Press to move t he cursor downwards o r to select
items.
VIDEO OUTPUT JACK
DC POWER INPUT JACK (DC12V ± 10%)
SIDE HOLE
BOTTOM CHASSIS
TOP COVER
5. Rotate the focus and zoom knobs for optimal video images. Remember to
tighten the screws once the adjustment is completed (FIG.7).
FIG.10
1
22
3
24
25
26
7
8
9
102
53
140
INNER COVER
DOME COVER
LENS
HOLE PLUG
FIG. 1 FIG. 2
FIG. 3 FIG. 4
3. Insert the video cable and power cable through the tube, and connect the video
output jack and the DC power input jack of the camera (FIG.5). Then screw the
tube into the side hole of the bottom chassis (FIG.6).
VIDEO OUTPUT
DC POWER INPUT
FIG. 5 FIG. 6
FIG. 7
TI LT AZIMUTH
PAN
Z O O M
F O C U S
6. Fix the safety rope on the top cover with a screwdriver (FIG.8). Replace the top
cover and tighten the screws (FIG.9).
FIG. 8 FIG. 9
Specifications
Lens
System
Model No.
Pick Up Element
Effective Pixels
Scanning System
Menu Control
Sync. Mode
Infrared Cut Filter
Resolution
Minimum Illumination
S/N Ratio
UTC
Auto Gain Control
White Balance
Shutter
Auto
Manual
Back Light Compensation
D-WDR
Noise Reduction
Sharpness
LSC
Digital Effect
Video Output
Infrared
LED Beam Spread
Radiant Distance
OSD Language
Power Input Voltage
Focal Length
Iris
Angle of View
H
V
D
NTSC or PAL
1/3" CMOS Image Sensor
2,688(H) x 1,520(V)
Progressive Scan
OSD Control
Internal
Auto Selectable, Automatic Switch from Color Mode to Monochrome
2,560(H) x 1,440(V) @ 30/25fps
More than 55dB (AGC-Off)
AHD-Coaxial protocol Supported
AUTO (16 Steps)
ATW / AWC / INDOOR / OUTDOOR / MANUAL
1/30(1/25)S ~ 1/50,000S
1/30(1/25)S, 1/60(1/50)S, FLK, 1/240S, 1/480S, 1/1,000S, 1/2,000S,
1/5,000S, 1/10,000S, 1/50,000s
OFF / BLC / HSBLC
OFF / ON / AUTO
2DNR
AUTO / OFF
ON / OFF
MIRROR / V-FLIP / ROTATE
AHD 4MP / CVBS
850nm
30°
20M
ENG / CHN1 / CHN2 / GER / FRA / ITA / SPA / POL / RUS / POR /
NED / TUR / JPN
DC12V ±10%
D/N 4MP AHD VARI-FOCAL VR DOME IR CAMERA
Power Consumption
IP Rating
Vandal Resistant Rating
4W
IP66
IK10
Design and specification are subject to change without notice.
Operating Temperature
Dimensions
Weight
-40 C ~ +50 C° ° ° ° (-40 F ~ 122 F)
ψ140 x 102mm(H)(D)
Peak Wavelength
0.15Lux / F1.4, 0Lux (IR On)
610g
Menu Map
MAIN
MENU
EXPOSURE SHUTTER AUTO/ 1/30(1/25)/ 1/60(1/50)/ FLK~1/50000
OFF
BRIGHTNESS (1~100)
AGC 0~15 ( )
ON LEVEL (0~15)
AUTO
D-WDR
BACKLIGHT
WHITE BAL ATW
AWCSET
OFF
HSBLC
BLC LEVEL LOW/ MIDDLE/ HIGH
SELECT AREA 1/ 2/ 3/ 4
AREA POSITION/ SIZE
DISPLAY
DEFAULT
BLACK MASK ON/ OFF
LEVEL (0~100)
MODE
DEFAULT
ON POSITION/ SIZE
OFF
ALL DAY
NIGHT AGC LEVEL (0~255)
INDOOR
OUTDOOR
MANUAL BLUE (0~100)
RED (0~100)
HIDDEN Menu
HIDDEN ADC TEST OFF/ ON
AE TEST OFF/ ON
VERSION
HIDDEN
OFF
OFF
RET
2. AE TEST
3. VERSION
4. RETURN
1. ADC TEST
Setting Menu and Function
To Open and Exit t he Menu screen
1. Press "SET" to s ho w the menu on the screen. Check the current settings
 on the menu.
2. Press  or  button to select the o pt io ns then use  or  button to
 se le ct a mode.
  SAVE&END: Save the se tt in gs of the internal OSD menu.
  NOT S AV E: Discard the settings of the internal OS D menu.
  RESET: Restore the c am er a settings to f ac to ry defaults.
  RETURN: Return to the previous page.
  EXIT: Exit the m ai n menu.
MAIN MENU
OFF
ATW
EXIT
SAVE&END
2. BACKLIGHT
3. WHITE BAL
4. DAY&NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. EXIT
1. EXPOSUTE
En te r Main Menuand e nt er 1. EXPOSURE.P re ss three times, then
pr es s SET(in the center of the 8- di re ct io na l button) to en te r the HIDDEN
me nu .
 
DAY&NIGHT D&N EXT
D&N AUTO
D N (DELAY) 0~60
DN (AGC)1~255
ND (DELAY)0~60
DN (DELAY)0~60
NR 2DNR MIDDLE/ HIGH/ OFFLOW/
COLOR
B/W ON
OFF
IR SMART
ND (AGC)1~255
ND (DELAY)0~60
LEVEL (0~15)
AREA POSITION/ SIZE
SPECIAL MIRROR OFF/ MIRROR/ V-FLIP/ ROTATE
LANGUAGE ENG/ CHN1/ CHN2/ GER/ FRA/ ITA/ SPA/ POL/
RUS/ POR/ NED/ TUR/ JPN
ADJUST SHARPNESS AUTO
OFF
EXIT
MONITOR
LSC ON/ OFF
OUTPUT MODE
SAVE&END
RESET
NOT SAVE
FORMATAHD/ CVBS
VIDEO. OUT NTSC/ PAL
NRT OFF/ ON
DPC LIVE DPC
WHITE DPC
BLACK DPC
ON
ON
ON
OFF
OFF
OFF
AGC LEVEL (0~255)
POS/ SIZE POSITION/ SIZE
POS/ SIZE POSITION/ SIZE
LEVEL (0~100)
START CNT1023
START CNT0
DPC VIEW OFF/ ON
DPC VIEW OFF/ ON
LEVEL (0~60)
LEVEL (0~60)
AGC (0~14)
LEVEL (0~10)
START AGC (0~255)
END AGC (0~255)
GAMMA USER/ 0.45~1.00
BLUE GAIN (0~100)
RED GAIN (0~100)
AHD664AX4.2
2.8~12mm
91 ~ 28° °
67.5 ~ 21.2° °
120.8 ~ 36° °
F1.4
  • Page 1 1
  • Page 2 2

LILIN AHD DOME IR CAMERA User manual

Category
Security cameras
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI