1 Button AutoPlay Audio Point

Blackbox-av 1 Button AutoPlay Audio Point, 7 Message AutoPlay Audio Point, Illuminated 7 Message AutoPlay Audio Point Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Blackbox-av 1 Button AutoPlay Audio Point Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of the Blackbox-av 1 Button AutoPlay Audio Point?
    What is the identifying feature of the AutoPlay Singlecup headphone?
    With which audio player is the AutoPlay functionality supported?
    How do I connect the AutoPlay Singlecup headphone to my own device?
    What is the function of the 3.5mm jack on the AutoPlay Singlecup headphone?
    How do I install the AutoPlay Singlecup headphone?
AutoPlay SingleCup
Manual v2.3
Nov 2018
AP-SC v2.1 Sep 2017
2
Contents
1. What is the AP-SC? ........................................................................ 3
2. Identifying your Handset ............................................................... 4
3. Connecting to SoundClip ............................................................... 4
4. Connecting to your own device ..................................................... 5
5. 3.5mm Jack .................................................................................... 6
6. Installation ..................................................................................... 6
6.1 Optional Teardrop ................................................................... 7
7. Electrical Specifications ................................................................. 8
8. Wiring Diagram .............................................................................. 8
AP-SC v2.1 Sep 2017
3
Thank you for purchasing the AutoPlay Singlecup headphone
The AP-SC is one of a range of products we offer specific to the
heritage marketplace. We are confident that we have other
products you will find useful and look forward to hearing from you
again soon.
T: +44 (0)1639 767007 | W: www.blackboxav.co.uk
1. What is the AP-SC?
The AutoPlay Singlecup headphone is an easily installed headphone
system which allows content to be played upon ‘pickup’ of the
handset.
The Headphone is magnetically attached to the wall mounted
handle when not in use. When removed from this handle content is
triggered.
AP-SC v2.1 Sep 2017
4
2. Identifying your Headphone
3. Connecting to SoundClip
AutoPlay functionality is supported by our SoundClip range of audio
players. The handset is supplied with a trigger and splitter cable, the
3.5mm jack is installed to the output, while the activation cables are
wired to an appropriate button terminal on the SoundClip device.
Without Dimple
With Dimple
Standard
AutoPlay
You will be able to identify whether your
headphone has AutoPlay functionality
through the existence of the dimple
shown in the image below.
AP-SC v2.1 Sep 2017
5
4. Connecting to your own device
You will need to check with the manufacturer of other playback
devices to ensure compatibility. To connect to third party devices
you will need to be aware of the cable connections as displayed
below.
3.5mm Jack from Handset
3.5mm Jack to your
Audio Playback Device
Input for Trigger Cable
= Signal
= 0v
Bare Ends
When the handset is removed from the hanger, the trigger is
‘open’.
Splitter Cable
Trigger Cable
AP-SC v2.1 Sep 2017
6
5. 3.5mm Jack
The 3.5mm jack outputs mono audio from the right hand channel.
Audio is only output from the tip.
6. Installation
The magnetic hanger needs to be mounted flush to a surface to
allow the headphones to sit securely - the headphone icon
displayed on the hanger should be installed right way up.
All headphones are supplied with a 90° knuckle which provides
additional stability to the armoured cable via it’s through panel
installation point.
A cutout for the knuckle will need to be made to the following
measurements (in mm).
This secures the otherwise weak point should the cable simply be
fed through the panel.
AP-SC v2.1 Sep 2017
7
6.1 Optional Teardrop
The AP-SC can be supplied with
a Teardrop mounting plate
which combines both the
Knuckle and Magnetic Hanger
into a compact unit for
installation onto your chosen
surface.
The measurements of the plate
are as pictured;
Not to scale
AP-SC v2.1 Sep 2017
8
7. Electrical Specifications
Max working Voltage: 24v DC
Max Contact Load: 50mA
Contact Impedance: 100R
8. Wiring Diagram
Reed N/O
when lifted
AP-SC v2.1 Sep 2017
9
For additional help please contact us:
www.blackboxav.co.uk/support
Tel: +44 (0)1639 874 100
Email: sales@blackboxav.co.uk
/