Vivo MOUNT-PC05C is a versatile mount designed to hold thin client PCs in a variety of locations and configurations. It can be mounted to a pole, under a desk, or to a VESA mount, making it suitable for use in offices, classrooms, or home offices. The mount features adjustable knobs to ensure a snug fit for your PC, and a strap to secure it in place. It has a weight capacity of 11lbs (5kg) and comes with all necessary hardware for easy installation.
Multifunctional Thin Client PC Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-pc05c
SKU: MOUNT-PC05C
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
TOOLS NEEDED
Phillips
Screwdriver
A (x1)
Mount
B (x1)
Strap
C (x1)
Pole Mount
Bracket
D (x3)
Adhesive Pad
E (x4)
ST4.8x16 Screw
F (x2)
M5x25
G (x8)
M4x12
H (x4)
Washer
I (x4)
Nut
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE: SOME HARDWARE MAY NOT BE USED
3
ASSEMBLY STEPS
STEP 1
Remove knobs from mount (A) and separate the mount.
4
STEP 2
OPTION A: POLE MOUNT
Attach larger half of mount to pole using the pole mount bracket (C) and
M5x25 screws (F). Apply one adhesive pad (D) to the assembled mount and
two pads to the inner face of the other half. Reattach halves using previously
removed knobs. Place PC into mount, adjust to fit, and tighten knobs. Secure
PC using the strap (B). Pole diameter must be 30mm to 40mm in diameter for
mount to fit.
F
C
B
D
5
STEP 2 (Continued)
OPTION B: UNDER DESK MOUNT
Apply one adhesive pad (D) to the larger half of mount and two pads to the inner face of
the other half. Use outer four holes on mount to mark drilling locations on the underside
of the desk. Drill holes no deeper than 5/8” (16mm) using a 3/16” (2.4mm) bit. With the
strap (B) fit into the slot, attach larger half of mount to the desk using ST4.8x16 screws
(E). Reattach halves using previously removed knobs.
D
E
O
N
Place PC into mount, adjust to fit, and tighten knobs. Secure PC using the strap.
6
STEP 2 (Continued)
D
G
H
I
OPTION C: VESA MOUNT
Attach smaller half of mount to VESA mount using four M4x12 screws (G),
washers (H) and nuts (I). Apply two adhesive pads (D) to the assembled mount
and one pad to the inner face of the other half.
7
STEP 2 (Continued)
B
If also installing a monitor, with the strap (B) fit into the slot, attach larger half of mount to
monitor using four M4x12 screws (G). Reattach halves using previously removed knobs.
Place PC into mount, adjust to fit, and tighten knobs. Secure PC using the strap.
LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
1
2
3
4
5
6
7
8
Vivo MOUNT-SGS24D Assembly Instructions