Altronix SMP3PMCTX Datasheet

Altronix
Brand
Altronix
Model
SMP3PMCTX
Category
Uninterruptible power supplies (UPSs)
Type
Datasheet

Altronix SMP3PMCTX is a supervised power supply/charger designed to convert a standard AC input into a regulated DC output for powering and charging security devices. It offers selectable 12VDC or 24VDC output with a continuous supply current of 2.5 amps. The built-in charger supports sealed lead acid or gel-type batteries with a maximum charge current of 0.5 amps. It features AC fail and battery presence/low battery supervision with form "C" contacts for monitoring.

Altronix SMP3PMCTX is a supervised power supply/charger designed to convert a standard AC input into a regulated DC output for powering and charging security devices. It offers selectable 12VDC or 24VDC output with a continuous supply current of 2.5 amps. The built-in charger supports sealed lead acid or gel-type batteries with a maximum charge current of 0.5 amps. It features AC fail and battery presence/low battery supervision with form "C" contacts for monitoring.

SMP3PMCTX
Supervised Power Supply/Charger
Rev. DSSMP3PMCTX_07162012
Overview
Specifications
SMP3PMCTX
Input:
• Input115VAC,50/60Hz,0.65ampor
230VAC,50/60Hz,0.35amp.
Output:
• 12VDCor24VDCselectableoutput.
• 2.5ampsupplycurrent.
• Filteredandelectronicallyregulatedoutputs.
• Shortcircuitandthermaloverloadprotection.
Battery Backup:
• Built-inchargerforsealedleadacidor
geltypebatteries.
• Maximumchargecurrent0.5amp.
• Zerovoltagedropwhenswitchingover
tobatterybackup.
Supervision:
• ACfailsupervision(form“C”contacts).
• Batterypresenceandlowbatterysupervision
(form“C”contacts).
Visual Indicators:
• ACinputandDCoutputLEDindicators.
Electrical:
• Operatingtemperature:0ºCto49ºCambient.
• BTU/Hr.:
- 12VDC:10BTU/Hr.
- 24VDC:18BTU/Hr.
• SystemACinputVArequirement:
- 115VAC:74.75VA.
- 230VAC:80.5VA.
Mechanical:
• EnclosureDimensions(HxWxDapprox.):
13.5”(342.9mm)x13”(330.2mm)x3.25”(82.55mm)
- Accommodatesuptotwo(2)12VDC/7AHbatteries.
• Productweight(approx.):7.1lbs.(3.22kg.).
• Shippingweight(approx.):8.0lbs.(3.63kg.).
Thissupervisedpowersupply/chargerwillconverta115VAC/230VAC,
50/60Hzinput,intoaregulated12VDCor24VDCoutput@2.5ampcontinuous
supplycurrent.
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
1.40”
(36mm)
1.40”
(36mm)
4.85”
(123mm)
4.85”
(123mm)
1.40”
(36mm)
1.40”
(36mm)
5.10”
(130mm)
5.10”
(130mm)
13.0”
(330mm)
5.10”
(130mm)
6.5625”
(167mm)
1.20”
(31mm)
1.20”
(31mm)
1.20”
(31mm)
3.25”
(83mm)
3.25”
(83mm)
3.25”
(83mm)
3.25”
(83mm)
1.0”
(25mm)
1.0”
(
25mm
)
10.5”
(
267mm
)
1.0”
(
25mm
)
1.0”
(25mm)
0.75”
(19mm)
0.75”
(19mm)
0.9375”
(24mm)
0.9375”
(24mm)
11.0”
(279mm)
12.5”
(318mm)
Enclosure Dimensions (H x W x D) (approximate):
13.5”(342.9mm)x13”(330.2mm)x3.25”(82.55mm)
  • Page 1 1
  • Page 2 2

Altronix SMP3PMCTX Datasheet

Altronix
Brand
Altronix
Model
SMP3PMCTX
Category
Uninterruptible power supplies (UPSs)
Type
Datasheet

Altronix SMP3PMCTX is a supervised power supply/charger designed to convert a standard AC input into a regulated DC output for powering and charging security devices. It offers selectable 12VDC or 24VDC output with a continuous supply current of 2.5 amps. The built-in charger supports sealed lead acid or gel-type batteries with a maximum charge current of 0.5 amps. It features AC fail and battery presence/low battery supervision with form "C" contacts for monitoring.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents