MaxTech NX-16 is a high-performance, software-configurable Ethernet adapter that provides many advantages over conventional hardware configured products. It offers ease of installation, auto-configuration, and convenient re-configuration without the need for setting numerous jumpers when installing or re-configuring the network card.
The NX-16 is Industry Standard Architecture (ISA) compatible and can be used in any IBM PC/XT/AT or other fully compatible computers. The adapter is NE-2000 compatible and includes a 16KB RAM buffer for faster network transmission and reception.
The NX-16 is easy to install, with a two-step process consisting of actual hardware installation and card configuration. The card is designed to be configured using the software included on the installation diskette, eliminating time-consuming jumper/switch settings.
MaxTech NX-16 is a high-performance, software-configurable Ethernet adapter that provides many advantages over conventional hardware configured products. It offers ease of installation, auto-configuration, and convenient re-configuration without the need for setting numerous jumpers when installing or re-configuring the network card.
The NX-16 is Industry Standard Architecture (ISA) compatible and can be used in any IBM PC/XT/AT or other fully compatible computers. The adapter is NE-2000 compatible and includes a 16KB RAM buffer for faster network transmission and reception.
The NX-16 is easy to install, with a two-step process consisting of actual hardware installation and card configuration. The card is designed to be configured using the software included on the installation diskette, eliminating time-consuming jumper/switch settings.
MaxTech NX-16 is a high-performance, software-configurable Ethernet adapter that provides many advantages over conventional hardware configured products. It offers ease of installation, auto-configuration, and convenient re-configuration without the need for setting numerous jumpers when installing or re-configuring the network card.
The NX-16 is Industry Standard Architecture (ISA) compatible and can be used in any IBM PC/XT/AT or other fully compatible computers. The adapter is NE-2000 compatible and includes a 16KB RAM buffer for faster network transmission and reception.
The NX-16 is easy to install, with a two-step process consisting of actual hardware installation and card configuration. The card is designed to be configured using the software included on the installation diskette, eliminating time-consuming jumper/switch settings.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI