J&E Home GD-SG000405AAA Installation guide

Brand
J&E Home
Model
GD-SG000405AAA
Type
Installation guide

This manual is also suitable for

Installation
To avoid scratches and swallowing parts，please do not install by children!
Hardware List
Hardware List
Seat
1
Backrest
1
Armrest
1
Seat cushion
1
Back cushion
1
Armrest cushion
1
Nuts、Washers、long
screws
8
Legs
4
Sofa cover
1
Base fabric
1
Buckle
1
Screw
2
1
First, screw the long screws
into the holes reserved for
backrest and armrest about
1/3 of the depth, then insert
them to the holes on the
seat.
Backrest
Armrest
2
3
4
5
Tighten with nuts from the
bottom (please tighten each
nut repeatedly to insure
firmness).
Seal the bottom with the
base cloth.And then Screw
the sofa Legs into the
reserving holes on the
seat.
Apply the connection buckles to connect the seats together(or not, it’s totally up to users).
Put on the sofa cover.
Installation
To avoid scratches and swallowing parts，please do not install by children!
Hardware List
Hardware List
Seat
1
Backrest
1
Armrest
1
Seat cushion
1
Back cushion
1
Armrest cushion
1
Sofa cover
1
Base fabric
1
Nuts、Washers、long
screws
8
Legs
4
1
First, screw the long screws
into the holes reserved for
backrest and armrest about
1/3 of the depth, then insert
them to the holes on the
seat.
Backrest
Armrest
2
3
4
5
Put on the sofa cover.
Tighten with nuts from the
bottom (please tighten each
nut repeatedly to insure
firmness).
Seal the bottom with the
base cloth.And then Screw
the sofa Legs into the
reserving holes on the
seat.
Apply the connection buckles to connect the seats together(or not, it’s totally up to users).
Installation
To avoid scratches and swallowing parts，please do not install by children!
Hardware List
Hardware List
Seat
1
Backrest
1
Seat cushion
1
Back cushion
1
Sofa cover
1
Base fabric
1
Nuts、Washers、long
screws
4
Legs
4
Buckle
1
Screw
2
1
First, screw the long screws
into the holes reserved for
backrest about 1/3 of the
depth, then insert them to
the holes on the seat.
Backrest
2
3
4
5
Put on the sofa cover.
Tighten with nuts from the
bottom (please tighten each
nut repeatedly to insure
firmness).
Seal the bottom with the
base cloth.And then Screw
the sofa Legs into the
reserving holes on the
seat.
Apply the connection buckles to connect the seats together(or not, it’s totally up to users).
Installation
To avoid scratches and swallowing parts，please do not install by children!
Hardware List
Hardware List
Ottoman side board
4
Bottom board
1
Seat cushion
1
Sofa cover
1
Base fabric
1
Legs and nuts
4
Big corner part
8
Small corner part
4
Screws
42
1
Note that the side of the
magic sticker is the bottom
surface.
2
3
4
Put on the sofa cover.
Seal the bottom with the
base cloth.And then secure
the legs of the sofa.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

J&E Home GD-SG000405AAA Installation guide

Brand
J&E Home
Model
GD-SG000405AAA
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents