Noble House 305415 Operating instructions

Type
Operating instructions
Label Picture Description QTY
A Sofa - Backrest 1
B Left Armrest 1
C Right Armrest 1
D Sofa Seat 1
Caution : You must read this before you proceed
This Loveseat is NOT a TOY.
Keep your child / children at bay during the assembly process.
Picture
Single Sofa
Page 1 OF 6
E Front Panel 1
F Seat Cushion 1
Label Picture Description QTY
Bolt m6*35 9
Washer 14
1
Before Beginning
Assembly:
Page 2 OF 6
Nut Cap
Allen Key
1
2
3
4
5
5
Bolt m6*30 5
Open the carton and place all the parts onto a clean and soft surface.
Unpack all packages of hardware.
Place the Right Armrest (C) with its inside facing skywards.
Attach Backrest(A) to Right Armrest(C) using Hardware( , ) with Allen Key( ).
Do not fully tighten at this stage.
Occationally some of the PE wicker shifts and covers the mounting positions preventing easy assembly;
the PE wicker should never be cut, but moved away from the mounting positions.
This Single Sofa has multiple parts and may require up to some 30 minutes to assemble. To give you an overview
of the Single Sofa parts, the above picture is to help you put the various parts into perspective. Please read through
the instructions herebelow to familiarise yourself with the parts and steps before assembly.
Overview
Step 1
Sofa- Backrest(A)
Right Armrest(C)
Le Armrest(B)
Sofa Seat(D)
Front Panel(E)
Seat Cushion(F)
Page 3 OF 6
3
2
1
1
2
3
Place Front Panel(E) between Seat(D) and Right Armrest(C).
Attach Front Panel (E) to Seat(D) using Hardware( ) with Allen Key( ) as shown in Picture 3 and Picture 4.
Do not fully tighten at this stage.
Place the Seat(D) between the Right Armrest(C) and Backrest(A).
Attach Seat(D) to Right Armrest(C) using Hardware( , ) with Allen Key( ).
Do not fully tighten the bolts.
Step 2
Step 3
Page 4 OF 6
1
2
3
1
2
3
2
5
3
5
3
1
2
3
21
Place Left Armrest(B) against Backrest(A), Seat(D) and Front Panel(E).
Attach the Left Armrest(B) to Backrest(A) using Hardware( , ) with Allen Key( ) as shown in Picture 5.
Attach Left Armrest(B) to Front Panel(E) using Hardware( , ) with Allen Key( ) as shown in Picture 6.
Do not fully tighten at this stage.
Step 5
Fully tighten all bolts at all joints, then cover the four Backrest Bolts with Nut Cap ( ).
Step 6
Put the Seat Cushion(F) on the Single Sofa.
Your Single Sofa is ready for use.
The Single Sofa can only be used on a flat and level surface.
Step 4
Page 5 OF 6
4
5
2
3
2
1
3
4
1
2
3
2
5
3
What is Proposition 65?
Proposition 65 is a California law that requires warning labels on products that may contain one of more than
800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment
(OEHHA) has deemed to cause cancer or other reproductive toxicity. Chemicals and elements on this list
include wood dust, brass, and other everyday substances, which can be found in very common household
items, such as: lamps, tableware, jewelry, crystal glasses, electric cords, beauty products, automobiles, and
furniture.
Why Did I Find a Proposition 65 Warning on My Home Goods Product?
We include Proposition 65 warnings on all of our products because there is always a chance that one of the
800-plus common chemicals and ingredients listed under this law could potentially be on our furniture or
packing materials. We risk large fines under this law, if we don't include this warning.
Should I worry?
We realize you may be worried finding this warning on our products, but we want to reassure you that the
hazardous exposure limits for any of these chemicals have never been found on furniture products that we’ve
shipped to our customers. Additionally, this warning label is very common and can be found on almost every
piece of furniture sold in the state of California.
Just How Common Are Proposition 65 Warnings?
Proposition 65 warnings have become so common in California that it is hard to take a trip to a local bank,
grocery store, or restaurant without finding at least one warning. In fact, even the Disney Land Resort has a
Proposition 65 warning:
Do not put hot items directly on furniture surface
Label Picture Description QTY
A Backrest 1
B Left Armrest 1
C Right Armrest 1
D Sofa Seat 1
E Seat Front Panel 1
F Back Middle Leg 1
G Seat Cushion 1
Sofa
Noble House Home Furnishings LLC. Page 1 OF 7
Label Picture Description QTY
Bolt (M6*35mm) 12
Washer Rings 20
Allen Key 1
Nut Cap 5
Bolt (M6*45mm) 5
Bolt (M6*15mm) 3
Before
Beginning
Assembly:
Noble House Home Furnishings LLC. Page 2 OF 7
This Sofa has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the Love Seat parts, the above picture is
to help you put the various parts into perspective. Please read through the
instructions here below to familiarise yourself with the parts and steps before
assembly.
Step 1
Open the carton and place all the parts onto a clean and soft surface.
Unpack all packages of hardware.
Attach the Back Middle Leg(F) and Backrest (A) using Bolts () and Washers
() with Allen Key () as shown in Picture.
DO NOT FULLY TIGHTEN THE BOLTS.
Noble House Home Furnishings LLC. Page 3 OF 7
Step 2
Attachthe Sofa Back (A) and Right Armrest (C) together using Bolts () and
Washers () with Allen Key () as shown in Picture.
DO NOT FULLY TIGHTEN THE BOLTS.
ATTENTION: There may be some PE wicker that may have covered the
bolt points.
To ease assembly, guide and slide the PE wicker away from the mounting
positions.
DO NOT CUT AWAY any PE WICKER as this would cause the wicker to
unravel !
Step 3
Attach Seat (D) to the Right Armrest (C) and Backrest(A) using Bolts () and
Washers () with Allen Key () as shown in Picture.
DO NOT FULLY TIGHTEN THE BOLTS.
Noble House Home Furnishings LLC. Page 4 OF 7
Step 4
Place the Front PanelEas pictureed above and affix to SeatDand
Right ArmrestC).
4.1) Attach Front Panel(E) to Seat (Dusing Hardware Bolt()and
Washer()with Allen Key()as shown above
4.2) Attach Front Panel(E) to Right Armrest (C) usingBolts () and Washers
()with Allen Key() as shown above
DO NOT FULLY TIGHTEN THE BOLTS.
Step 5
Place Left Armrest(B) against Backrest(A),Seat (D) and Front PanelE)
5.1) Attach the Left Armrest(B)to Backrest(A) using Bolts () and Washers
()with Allen Key()as shown above
5.2) Attach the Left Armrest(B)to Front Panel(E) using Bolts () and Washers
()with Allen Keyabove
DO NOT FULLY TIGHTEN THE BOLTS.
Step 5.2
Step 4.1
Step 4.2
Step 5.1
D
Noble House Home Furnishings LLC. Page 5 OF 7
Step 7
With the help of your adult partner, place the Chair on a level surface to check for wobbles.
If it wobbles, lift the Chair some 30cm to 50cm high from the ground.
Keep your feet and toes well away from the drop zone.
Drop the Chair freely and vertically with all four legs, hitting the ground, all at the same time.
This Drop Test will help to ensure that all the Bolts and gaps reach full alignment status.
Test again for evenness on a level surface.
If no wobbles are found, slowly and steadily, place the Chair facedown.
Then, proceed to tighten all Bolts at all joints in a sequential manner.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on towards the next one.
This could cause the frame to warp. If there are still wobbles, loosen the Bolts and
execute the same drop test.
If the Chair is not stable, it could lead to damage to the product.
Fully tighten all bolts at all joints,then cover the four Backrest Bolts with Nut
Cap()
Step 8
Put the Seat Cushion (G) on the Sofa.
Your sofa is ready for use.
The Sofa can only be used on the flat and level surface.
Step 6
Noble House Home Furnishings LLC. Page 6 OF 7
Questions & Answers about Proposition 65
• What is Proposition 65?
Proposition 65 requires businesses to provide warnings to Californians about significant
exposures to chemicals that cause cancer, birth defects or other reproductive harm.
These chemicals can be in the products that Californians purchase, in their homes or
workplaces, or that are released into the environment. By requiring that this information
be provided, Proposition 65 enables Californians to make informed decisions about their
exposures to these chemicals.
Proposition 65 also prohibits California businesses from knowingly discharging
significant amounts of listed chemicals into sources of drinking water.
Proposition 65 requires California to publish a list of chemicals known to cause cancer,
birth defects or other reproductive harm. This list, which must be updated at least once a
year, has grown to include approximately 900 chemicals since it was first published in
1987.
• What types of chemicals are on the Proposition 65 list?
The list contains a wide range of naturally occurring and synthetic chemicals that include
additives or ingredients in pesticides, common household products, food, drugs, dyes, or
solvents. Listed chemicals may also be used in manufacturing and construction, or they
may be byproducts of chemical processes, such as motor vehicle exhaust.
• What does a warning mean?
If a warning is placed on a product label or posted or distributed at a workplace, a
business, or in rental housing, the business issuing the warning is aware or believes that
it is exposing individuals to one or more listed chemicals.
By law, a warning must be given for listed chemicals unless the exposure is low enough
to pose no significant risk of cancer or is significantly below levels observed to cause
birth defects or other reproductive harm.
• Where can I get more information on Proposition 65?
If you have specific questions on the administration or implementation of Proposition 65,
you can contact OEHHA's Proposition 65 program at P65.Questions@oehha.ca.gov, or
by phone at (916) 445-6900.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Noble House 305415 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI