Magic Home OWS-TSA200, CS-W30805919 User guide

  • Hello! I am an AI chatbot trained to assist you with the Magic Home OWS-TSA200 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Instruction
Accessories List
Serial number
Product
Quantity
Picture
Note
Seat
1
Backrest
1
Sofa Armrest
2
Leg
2
Support frame
1
Accessories bag
1
long screws*2 Pcs
Washer*2 Pcs
Nut*2 Pcs
Small corner part*6 Pcs
big corner part*4 Pcs
8x25mm screws*28 Pcs
8x30mm screws*3 Pcs
6x30mm screws*12 Pcs
Base cover
1
Installation steps:
A Attach the backrest to
the seat cushion. As
shown in the picture,
first fix the small metal
corner on the backrest
with 8x25mm screws,
and then attach it to the
seat cushion.
8x25mm
screw
B Install armrests. First
screw into the left(or you
can start with the right
side) armrest about one-
third of the depth with a
long screw, then insert it
into the reserved screw
hole on the backrest, and
fasten it with a washer
and a nut from inside.
Same steps for the right
armrest.
C Reinforce the
steadiness of the almost
done loveseat. As shown
in the figures: according
to the reserved screw
holes, firstly fasten the
small metal corners with
screws, and then use the
large metal corners to
attach and fasten the
armrest, backrest and
seat cushion accordingly,
tighten all the screws, and
then install the
supporting legs. At last,
install the middle support
frame, and seal the sofa
bottom with the base
cover.
DThe finished sofa
should look like that in
the right picture
8x30mm
screw
6x30mm
screw
8x25mm
screw
/