J&E Home GD-SG000308AAF, B011-HS00F6508, GD-SG000405AAA Installation guide

  • Hello! I am an AI chatbot trained to assist you with the J&E Home GD-SG000308AAF Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation
To avoid scratches and swallowing partsplease do not install by children!
Hardware List
Hardware List
Seat
1
Backrest
1
Armrest
1
Seat cushion
1
Back cushion
1
Armrest cushion
1
NutsWasherslong
screws
8
Legs
4
Sofa cover
1
Base fabric
1
Buckle
1
Screw
2
1
First, screw the long screws
into the holes reserved for
backrest and armrest about
1/3 of the depth, then insert
them to the holes on the
seat.
Backrest
Armrest
2
3
4
5
Tighten with nuts from the
bottom (please tighten each
nut repeatedly to insure
firmness).
Seal the bottom with the
base cloth.And then Screw
the sofa Legs into the
reserving holes on the
seat.
Apply the connection buckles to connect the seats together(or not, its totally up to users).
Put on the sofa cover.
Installation
To avoid scratches and swallowing partsplease do not install by children!
Hardware List
Hardware List
Seat
1
Backrest
1
Armrest
1
Seat cushion
1
Back cushion
1
Armrest cushion
1
Sofa cover
1
Base fabric
1
NutsWasherslong
screws
8
Legs
4
1
First, screw the long screws
into the holes reserved for
backrest and armrest about
1/3 of the depth, then insert
them to the holes on the
seat.
Backrest
Armrest
2
3
4
5
Put on the sofa cover.
Tighten with nuts from the
bottom (please tighten each
nut repeatedly to insure
firmness).
Seal the bottom with the
base cloth.And then Screw
the sofa Legs into the
reserving holes on the
seat.
Apply the connection buckles to connect the seats together(or not, its totally up to users).
Installation
To avoid scratches and swallowing partsplease do not install by children!
Hardware List
Hardware List
Seat
1
Backrest
1
Seat cushion
1
Back cushion
1
Sofa cover
1
Base fabric
1
NutsWasherslong
screws
4
Legs
4
Buckle
1
Screw
2
1
First, screw the long screws
into the holes reserved for
backrest about 1/3 of the
depth, then insert them to
the holes on the seat.
Backrest
2
3
4
5
Put on the sofa cover.
Tighten with nuts from the
bottom (please tighten each
nut repeatedly to insure
firmness).
Seal the bottom with the
base cloth.And then Screw
the sofa Legs into the
reserving holes on the
seat.
Apply the connection buckles to connect the seats together(or not, its totally up to users).
Installation
To avoid scratches and swallowing partsplease do not install by children!
Hardware List
Hardware List
Ottoman side board
4
Bottom board
1
Seat cushion
1
Sofa cover
1
Base fabric
1
Legs and nuts
4
Big corner part
8
Small corner part
4
Screws
42
1
Note that the side of the
magic sticker is the bottom
surface.
2
3
4
Put on the sofa cover.
Seal the bottom with the
base cloth.And then secure
the legs of the sofa.
/