Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Modular 4-piece design
•
Pivot ″snap together″ installation
•
Durable high-gloss finish
•
Wall surround available with smooth finish or glazed
tile appearance
•
10-year consumer/3-year commercial limited warranty
•
Caulkless seam installation
•
Not recommended as a bath only installation
•
15″ (38.1 cm) bath depth (floor to top of threshold)
•
60-1/4″ (153 cm) x 31-1/4″ (79.4 cm) x 73-1/4″
(186.1 cm) complete unit rough-in dimensions include
flanges
•
60″ (152.4 cm) x 30″ (76.2 cm) x 72″ (182.9 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z124.1.2
•
ASTM E162
•
ASTM E662
•
CSA B45.5
60″ (152.4 cm) BATH AND WALL
SURROUND
71140110
ALSO 71140120, 71240110, 71240120
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71140110 60″ (152.4 cm) bath and wall surround, tile wall, left drain ❑ 0 ❑ Other_____
71140120 60″ (152.4 cm) bath and wall surround, tile wall, right drain ❑ 0 ❑ Other_____
71240110 60″ (152.4 cm) bath and wall surround, smooth wall, left drain ❑ 0 ❑ Other_____
71240120 60″ (152.4 cm) bath and wall surround, smooth wall, right drain ❑ 0 ❑ Other_____
Model ADA Adaptive Component Description Colors/Finishes
71140116 Complete unit with age in place backers, left drain ❑ 0 ❑ Other_____
71140126 Complete unit with age in place backers, right drain ❑ 0 ❑ Other_____
71240116 Complete unit with age in place backers, left drain ❑ 0 ❑ Other_____
71240126 Complete unit with age in place backers, right drain ❑ 0 ❑ Other_____
ACCORD
®
Page 1 of 2
1065331-4-
F
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Fixture*:
Basin area:
Bathing well 46-1/4″ (117.5 cm) x 20-1/2″ (52.1 cm)
Top area 52-1/4″ (132.7 cm) x 22-1/2″ (57.2 cm)
To overflow:
Water depth 11″ (27.9 cm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71140110
71140120
71240110
71240120
56-3/4″ (144.1 cm) 56-1/2″ (143.5 cm)
Installation Notes
Install this product according to the installation guide.
Product is designed to be used with a single-handle mixer
valve with an escutcheon cover not to exceed 7-3/4″ (19.7
cm) in width.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown.
Bath cannot be installed without the wall surround.
Width of back wall at the top transitions from 60″ (152.4 cm)
at the front to 59-3/8″ (150.8 cm) in the back corners. Furring
strips approximately 1/4″ (6 mm) thick should be used at the
back corner studs if drywall is to be installed over the nailing
flange.
30" (76.2 cm)
14" (35.6 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
4" (10.2 cm)
16" (40.6 cm)
Drain Cutout
55"
(139.7 cm)
73-1/4"
(186.1 cm)
60"
(152.4 cm)
30" (76.2 cm)
17" (43.2 cm)
3-1/8" (7.9 cm)
Overflow Detail
22-1/4"
(56.5 cm)
59-3/8"
(150.8 cm)
31-1/4"
(79.4 cm)
1-1/4"
(3.2 cm)
15"
(38.1 cm)
19"
(48.3 cm)
8"
(20.3 cm)
6" (15.2 cm)
(Typical)
31-1/4"
(79.4 cm)
2" (5.1 cm) D.
Drain
3-1/2"
(8.9 cm)
10"
(25.4 cm)
15-1/4"
(38.7 cm)
8"
(20.3 cm)
Product Diagram
ACCORD
®
ACCORD
®
60″ (152.4 cm) BATH AND WALL SURROUND
Page2of2
1065331-4-
F
/