Sterling RH7114-5425S Installation guide

Type
Installation guide

This manual is also suitable for

Sterling RH7114-5425S is a frameless bypass bath/shower door with CleanCoat glass coating. It is made of heavy-duty, anodized aluminum-framed glass doors with out-of-plumb adjustability for easy installation. The aluminum components are extruded from alloy 6063-T5 and the reversible top track can be installed with either the round or flat side facing out. The stainless steel hardware prevents rusting or corrosion and the 1/4″ (6 mm) thick tempered glass ensures durability. The two through-the-glass towel bars, located both inside and outside, enhance appearance and usability.

Sterling RH7114-5425S is a frameless bypass bath/shower door with CleanCoat glass coating. It is made of heavy-duty, anodized aluminum-framed glass doors with out-of-plumb adjustability for easy installation. The aluminum components are extruded from alloy 6063-T5 and the reversible top track can be installed with either the round or flat side facing out. The stainless steel hardware prevents rusting or corrosion and the 1/4″ (6 mm) thick tempered glass ensures durability. The two through-the-glass towel bars, located both inside and outside, enhance appearance and usability.

Features
Compression molded from Sterling’s exclusive solid
Vikrell
®
material
Modular 4-piece design
Pivot snap together installation
Caulkless installation
Durable high gloss finish
Wall surround available with smooth finish or glazed
tile appearance
10-year consumer/3-year commercial limited warranty
60 (152.4 cm) x 31-1/4 (79.4 cm) x 73-1/4
(186.1 cm) complete unit rough-in dimensions include
flanges
60 (152.4 cm) x 30 (76.2 cm) x 72 (182.9 cm)
complete unit finished dimensions
15 (38.1 cm) bath depth (floor to top of dam)
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
IAPMO/UPC
CSA B45
ASTM E162
ASTM E662
60 (152.4 cm) BATH/SHOWER
SYSTEM
71140110
ALSO 71140120, 71240110, 71240120
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71140110 Tile finish wall surround and bath with left drain 0 Other_____
71140120 Tile finish wall surround and bath with right drain 0 Other_____
71240110 Smooth finish wall surround and bath with left drain 0 Other_____
71240120 Smooth finish wall surround and bath with right drain 0 Other_____
ACCORDTM
Page 1 of 2
1065331-4-
C
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Fixture*: basin area top area
Bathing well 46-1/4
(117.5 cm) x
20-1/2 (52.1 cm)
52-1/4
(132.7 cm) x
22-1/2 (57.2 cm)
To overflow water depth capacity
11 (27.9 cm) 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71140110
71140120
71240110
71240120
56-3/4 (144.1 cm) 56-1/2 (143.5 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical.
Studs should be positioned roughly as shown for wall
surround installation.
Bath cannot be installed without the wall surround.
Width of back wall at the top transitions from 60 (152.4 cm)
at the front to 59-3/8 (150.8 cm) in the back corners. Furring
strips approximately 1/4 (6 mm) thick should be used at the
back corner studs if drywall is to be installed over the nailing
flange.
30" (76.2 cm)
14" (35.6 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
4" (10.2 cm)
16" (40.6 cm)
6" (15.2 cm)
(Typical)
3-1/2"
(8.9 cm)
10"
(25.4 cm)
2" (5.1 cm)
D. Drain
Drain Cutout
31-1/4"
(79.4 cm)
1-1/4"
(3.2 cm)
15"
(38.1 cm)
19"
(48.3 cm)
22-1/4"
(56.5 cm)
59-3/8"
(150.8 cm)
8"
(20.3 cm)
15-1/4"
(38.7 cm)
8"
(20.3 cm)
55"
(139.7 cm)
73-1/4"
(186.1 cm)
60"
(152.4 cm)
30" (76.2 cm)
17" (43.2 cm)
31-1/4"
(79.4 cm)
3-1/8" (7.9 cm)
Overflow Detail
Product Diagram
ACCORDTM
ACCORDTM 60 (152.4 cm) BATH/SHOWER SYSTEM
Page2of2
1065331-4-
C
Features
CleanCoat
TM glass coating
Heavy-duty, anodized aluminum-framed glass doors
Out-of-plumb adjustability allows for easy installation
Aluminum components extruded from alloy 6063-T5
Reversible top track can be installed with either the
round or flat side facing out
Stainless steel hardware prevents rusting or corrosion
1/4 (6 mm) thick tempered glass
Two through-the-glass towel bars, located both inside
and outside, enhance appearance and usability
Frameless design highlights bathing area
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z97.1 (tempered glass)
16 CFR Part 1201
FRAMELESS BYPASS BATH/
SHOWER DOOR
5400 Series
Colors/Finishes
Refer to the Price Book for current frame finish and glass
options
Specified Model
Model A (Max Width)* B (Height)* C (Walk Through Max)*
5405-59** 59-5/8 (151.4 cm) 58-1/16 (147.5 cm) 27-7/8 (70.8 cm)
5425-57** 57 (144.8 cm) 55-1/2 (141 cm) 26-5/8 (67.6 cm)
5425-59** 59-5/8 (151.4 cm) 55-1/2 (141 cm) 27-7/8 (70.8 cm)
5475-48** 47-5/8 (121 cm) 70-1/16 (178 cm) 21-7/8 (55.6 cm)
5475-59** 59-5/8 (151.4 cm) 70-1/16 (178 cm) 27-7/8 (70.8 cm)
* Note: Consult the diagram on the next page for the location of the measurements.
** Note: Add appropriate frame color/finish code to the end of the unit model # when ordering.
FINESSETM
Page 1 of 2
1058857-4-
F
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
C
B
A
1-7/8"
(4.8 cm)
2-1/2"
(6.4 cm)
2-1/2"
(6.4 cm)
2"
(5.1 cm)
1-7/8"
(4.8 cm)
Product Diagram
FINESSETM
FINESSETM FRAMELESS BYPASS BATH/ SHOWER DOOR
Page2of2
1058857-4-
F
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Sterling RH7114-5425S Installation guide

Type
Installation guide
This manual is also suitable for

Sterling RH7114-5425S is a frameless bypass bath/shower door with CleanCoat glass coating. It is made of heavy-duty, anodized aluminum-framed glass doors with out-of-plumb adjustability for easy installation. The aluminum components are extruded from alloy 6063-T5 and the reversible top track can be installed with either the round or flat side facing out. The stainless steel hardware prevents rusting or corrosion and the 1/4″ (6 mm) thick tempered glass ensures durability. The two through-the-glass towel bars, located both inside and outside, enhance appearance and usability.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI