Futuro Futuro WL24RACCOLTA Installation guide

Type
Installation guide

This manual is also suitable for

Futuro Futuro
Futuro Futuro
RANGE HOOD
INSTALLATION MANUAL
MODEL: RACCOLTA INSERT
NOTE: PRIOR TO INSTALLATION
Please inspect range hood visually,
as well as connect it to power supply
and test its operation.
2
For easier installation, remove the cabinet
and install the range hood in cabinet,
then install the hood+cabinet assembly.
Recommended
Installation
Height
26” - 28”
from cooktop
to bottom
of hood
1
3
Insert hood into cabinet, and secure with screws.
Adjust & level as necessary.
Note: you may also use ller panels / transoms, as needed.
FEATURE: REAR EXHAUST (THROUGH-WALL VENTING)
THIS MODEL CAN EXHAUST THROUGH THE TOP, OR THE REAR. TO EXHAUST THROUGH THE REAR (THROUGH WALL):
1.) REMOVE 8 SCREWS & LIFT OUT BLOWER MODULE (AS SHOWN); 2.) DISCONNECT THE POWER PLUG (NOT PICTURED).
3.) TURN THE BLOWER MODULE & RE-INSERT INTO HOOD; 4.) RECONNECT THE POWER PLUG & REPLACE 8 SCREWS.
RACCOLTA
24” VERSION
DIMENSIONS
RACCOLTA
36” VERSION
DIMENSIONS
NOTE: Dimensions are provided as a general reference. The manufacturer strongly recommends measuring
the actual range hood unit on-site, and to avoid making any commitments to cutting or customizing cabinetry
until these measurements are made.
20 1/4”
28 1/2”
21”
29”
10 1/4”
10 1/4”
10 3/4”
10 3/4”
1”
1”
  • Page 1 1
  • Page 2 2

Futuro Futuro WL24RACCOLTA Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI