2. Golden Lighting
  3. 7035-5P BLK

Golden Lighting 7035-5P BLK Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Golden Lighting 7035-5P BLK Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Assembly Instructions: 7035-3P/5P (Quinn)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Removeallofthecontentsfromthecarton.Seetheimportantnotesabove.Removetheoldxturefromtheceiling,includingtheold
mountingstrap.
1.Takethemountingstrapassemblyfromthepartsbag.Oneendofnipple(F)shouldbeattachedtomountingstrap(A)withawasher
andhexnut(CandD)inplace.The other end should have canopy loop (H) attached.
2.Useascrewdriverandmountingscrews(B)toattachmountingstrap(A)tothejunctionbox.(Unscrewcanopyloopcollar(I)from
canopyloop(H).Passcanopy(G)overthemountedcanopylooptotesttheheight.Approximatelyhalfofthecanopyloop’sexterior
threadsshouldbeexposed,andthecanopyloopcollarshouldtsnuglyontothecanopyloop.Removecanopy(G)andadjustthe
heightofnipple(F)andcanopyloop(H)untilthedesiredheightisreached.)
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, contact
the place of purchase.
FINISHING THE INSTALLATION
10.Pushcanopy(G)uptotheceiling.Slidecanopyloop(H)andcanopyloopcollar(I)upbeneaththecanopy.Tightlythreadcanopyloop
collar (I) onto canopy loop (H) to secure canopy (G) in place.
11.Slidecandlesleeves(V)oversockets(W).Adjustuntilthecandlesleevesarestraight.
12.Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommended
wattage.
Yourinstallationiscomplete.Turnonthepowerandtestthexture.
ASSEMBLING THE FIXTURE
3.Nut(T)androd(S)areonthexture’swires.Threadnut(T)androd(S)ontopost(U).Thentwistrod
(S) onto post (R).
4.Metalrings(XXandAA)aswellasxturearms(Z)areatforpackagingpurposes.
5.Slidearms(Z)andmetalrings(XandAA)apartuntiltheringsare equally spaced apart.
6.Nuts(OandP),nipple(N),topcap(M)andtoploop(L)areonthexture’swires,butnotattached.
Thread nut (P) onto the bottom of nipple (N). Thread the bottom of nipple (N) into post (Q) before
threadingnut(O)ontothetopofnipple(P).Screwtopcap(M)andtoploop(L)ontothethreadsof
nipple (N).
7.Bymeasuring,determinethecorrectnumberofchainlinksneededforproperhangingheight.If
necessary,useapairofplierstoopenandremoveanyexcesschain.Attachchainconnectors(K)to
eachendofchain(J)beforeattachingoneendofthechainconnectorandchaintotoploop(L).Close
thechainconnector.Connecttheotherchainconnector(K)tocanopyloop(H).Feedthexture’swires
upthroughtoploop(L)thenthroughchain(J)(everythreelinksorso).
8.Pullthewiresuntiltaut.Gentlyslidecanopyloopcollar(I)andcanopy(G)ontothechain/wires.
CONNECTING THE WIRES
9.Haveanassistantsupportthexture’sweightwhilecompletingthe
wiring.Refertothewiringdiagrambelowandattachthexture’swires
tothepowersupplywiresfromthejunctionbox.ConnectHottoHot,
NeutraltoNeutral,andGroundtoGround.Twisttheendsofthewire
pairstogether,andthentwistonawireconnector.Makesurealltwists
areinthesamedirection.Ifthereisnohousegroundwirecomingfrom
thejunctionbox,locategroundscrew(E)onthemountingbracket/
mountingstrapandwrapthexture’sgroundwirearoundtheground
screw.Useascrewdrivertotightenthetopofgroundscrew(E)ontothe
wiresandintothemountingbracket/mountingstrap.Tuckthewiresinto
thejunctionbox.
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
House Wires
Fixture Wires
Hot
A
C
D
E
F
G
H
I
J
B
K
L
M
O
P
N
Q
R
S
T
U
V
W
Z
AA
Y
X
/