SportsArt T645L User manual

SportsArt
Brand
SportsArt
Model
T645L
Category
Treadmills
Type
User manual

SportsArt T645L is a high-end treadmill designed to provide a challenging and effective workout experience. With its powerful motor and sturdy construction, it can accommodate users of all fitness levels, from beginners to experienced athletes. The T645L features a variety of pre-programmed workouts and customizable options, allowing users to tailor their workouts to their specific goals. It also has a built-in heart rate monitor and wireless connectivity, enabling users to track their progress and stay motivated.

SportsArt T645L is a high-end treadmill designed to provide a challenging and effective workout experience. With its powerful motor and sturdy construction, it can accommodate users of all fitness levels, from beginners to experienced athletes. The T645L features a variety of pre-programmed workouts and customizable options, allowing users to tailor their workouts to their specific goals. It also has a built-in heart rate monitor and wireless connectivity, enabling users to track their progress and stay motivated.

T645L (16”) Repair Manual (Electronics)
Date: 2017/08/13 - V1.0
1-1. Product picture
1-1-1
1-2. Display picture -T645L (19”)
1-2-1
1-3. Component Placement - T645L 19” Display
1-3-1
HTR board
Earphone set board
NFC board
Wake up- key board
WIFI antenna
SA Well+ board
Bluetooth Board
1-3. Component Placement - T645L 19” Display
1-3-2
主板
Control board
Mainboard
TV board
1-3. Positions of the Parts- T645L 16”, 19” Lower Machine Set
1-3-3
Drive board
Incline unit
Filter
AC Servo Motor
Eup board
Auto-lubrication System
AV board
1-4. Wire connections -T645L
1-4-1
1-5. Wiring – T645L 16”,19” Display
1-5-1
1-5. Wiring - T645L 16”,19” Display
1-5-2
USB
HTR Wiring
SA WELL+ Wireless Board Wiring
1-5. Wiring - T645L EAC (TFT) the Drive board
1-5-3
1-5. Wiring Diagram-T645L Auto-lubrication System
1-5-4
Lubrication VR SET
Lubrication board
1-5. Wiring - EUP board
1-5-5
To Display
(LED, keypad)
From Filter
To Drive board
Troubleshooting
Model T645L 16”,19”
Malfunction : Safety-key board man
Circumstance: Place the Safety-key. The Displays does not
have any reaction.
Possible Causes: 1.Safety-key board faulty.
Troubleshooting : 1.Check the safety-key magnet
2.Inspect Safety-key board Wiring connected
3.Replace the safety-key board and test again.
3-1-1
Safety-key board
bridge board
To Safety-key board
Troubleshooting
Model T645L 16”,19”
Malfunction: Unit cannot start
Circumstance: After power on, no displays
Possible Causes: Malfunction of the Power Voltage Input, or
Damage to the Parts
Troubleshooting: 1.Check the Fuse and the Switch
2.Check if all cables is well-connected
3. Inspect EUP board
4.Replace drive board (TFT).
5.Replace Control board Power Light
3-2-1
Fuse and Switch
Filter
Drive board
EUP board
Troubleshooting
Model T645L 16”,19”
Malfunction: Burnt fuse
Circumstance: Upon boot, the Safety Fuse is blown immediately
Possible Causes:
1. The Parts of the Machine has short-circuit reactions
2. Malfunction of the Parts of the Driver Set
Troubleshooting 1.Check if the Machine Wiring is broken or the
if there is any short-circuit reaction.
2.Take out the Power Cord and directly check the screws
from AC1 to the housing or from AC2 to the housing to see if
the Parts have any short-circuit reactions.
3.Replace the Drive board and test again
4.Replace Filter.
3-3-1
Filter
Troubleshooting
Model: T645L 16”,19”
Malfunction: Burnt fuse
Circumstance: Press the speed up. The Fuse is tripped off.
Possible Causes: 1.short-circuit reactions in the Motor
2. Malfunction of the Drive board.
Troubleshooting 1.Replace the Drive board and test again
2.Replace Motor and test again
3.Replace the Sensor Set and test again
3-3-2
Displays
Sensor
Motor
Drive board
Drive board
Motor
Sensor (Encoder)
Troubleshooting
Mode l: T645L 16”,19”
Malfunction : Burnt fuse
Circumstance : After running for a while,
the Fuse is suddenly tripped off.
Possible Causes: 1. Fuse faulty.
2.Running deck or belt is worn away
3. Drive board faulty.
Troubleshooting: 1.Check main fuse?
2. Inspect lubrication system
3. Inspect running Belt is too tight or loose ?
4. If running belt is worn away, please change
new one.
3.Replace Drive board and test again.
3-3-3
TFT Drive Board
Display board
Sensor
Motor
Drive board
Motor
Troubleshooting
Model T645L 16”,19”
Malfunction: Malfunction of the Wireless Heart Rate Device
Circumstance: Malfunction of the Wireless Heart Rate Device
Possible Causes:
1. Inadequate battery voltage for the Heart Rate Transmitter
2. Malfunction of the Heart Beat Receiver
3.Ambient interferences such as the light and the speaker
Troubleshooting: 1.Replace Heart Rate Transmitter or the battery
2.Check the Wireless Heart Beat Receiver Wiring
3.Replace the Wireless Heart Beat Receiver
3-4-1
Polar T34 transmitter
Heart rate Receiver
Troubleshooting
Model : T645L 16”,19”
Malfunction: HTR Malfunction
Circumstance: HTR value is not correct.
Possible Causes: 1. Malfunction of the HTR Wiring
2. HTR board faulty.
3. Malfunction of display Wiring
Troubleshooting: 1.Check the HTR wire connection.
2.Check the HTR board signal LED
3.Replace the HTR board
3-4-2
LED
Name
Details
LED1
POLAR Heart Rate
Light
The blinking light indicates input of the
POLAR heart rate signal.
LED2
signal light of the
handheld HTR
When you place your hands on handheld
grips, the light will be turned on.
LED3
HTR Heart Rate
Light
The blinking light indicates input of the
POLAR heart rate signal.
LED4
Heart Rate Output
Light
Each blink of the light indicates an output
from the heart rate device.
HTR plate
Bridge board
HTR wire connection
HTR Led
Troubleshooting
Model : T645L 16”,19”
Malfunction.: ERR0R_1_2
Circumstance : Displays shows ERR0R_1_2. the Machine runs at half speed.
Possible Causes: 1.Treadmill deck / Belt is worn away seriously
2. Malfunction of the Motor Temperature Switch,
or Wiring is not well-connected
Troubleshooting 1.Check if the Motor surface is hot when the message appears.
If yes, the Treadmill Board/Belt is worn away to a certain degree
Please inject oil for maintenance, or replace the Treadmill Belt
2.If the Motor is not very hot when the message appears,
please check if the Temperature Switch Wire is well-connected?
3.If the Motor is not hot and the wire is well-connected
when the message appears, Malfunction of the Motor
temperature Switch Parts may be the cause.
3-5-1
the motor temperature sensor
(Yellow-Yellow)
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

SportsArt T645L User manual

SportsArt
Brand
SportsArt
Model
T645L
Category
Treadmills
Type
User manual

SportsArt T645L is a high-end treadmill designed to provide a challenging and effective workout experience. With its powerful motor and sturdy construction, it can accommodate users of all fitness levels, from beginners to experienced athletes. The T645L features a variety of pre-programmed workouts and customizable options, allowing users to tailor their workouts to their specific goals. It also has a built-in heart rate monitor and wireless connectivity, enabling users to track their progress and stay motivated.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers