IMPORTANT:

• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.

• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!

• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!

CONNECTING THE WIRES

3.Attachthexture’swirestothepowersupplywiresfromthe

junctionbox.Connectblacktoblack(orsmooth);whitetowhite(or

ribbed);groundtoground(greenorcopper).Twisttheendsofthe

wirepairstogether,thentwistonawireconnector.Makesureall

contact the place of purchase.

AssemblyInstructions:9808-1W (Seaport)

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

PREPARING FOR INSTALLATION

Remove all of the contents from the carton. See the

important notes above. Shut off the power at the

circuit breaker and completely remove the old xture

from the wall, including the old mounting strap.

ensurethatthebackplatewillhangstraightandenough

ofthethreadsofmountingscrews(B)willbeexposedfor

deconuts(F)tot.Placethextureaside.Pullthehouse

wiresthroughthecenterofmountingstrap(A).

2.Placemountingstrap(A)overthejunctionboxsothat

mountingscrews(D)maybeinserted.Securemounting

strap(A)tothejunctionboxwithmountingscrews(D)

andascrewdriver.Tightenthescrewssecurely.

House Wires

Fixture Wires

FINISHING THE INSTALLATION

4.Placethexture’sbackplate(G)overmountingstrap(A)sothattheholesinmountingstrap(A)lineupwiththeholesinbackplate(G).