2. gefran
  3. 1300
1300

gefran 1300, 1300-RD00-00-0-x Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the gefran 1300 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the function of the PAS key?
    What does Pro stand for?
    What input sensor types are supported by the Gefran 1300 controller?
    How do I adjust the control setpoint?
    How do I switch between automatic and manual control modes?
    What is Self-Tune and how do I enable it?
GEFRAN SpA
Via Sebina, 74 - 25050 PROVAGLIO D’ISEO (BS) ITALY
This Quick Start Guide provides basic information on
setting up the Gefran 1300 controller for the application
referenced above. Additional software and hardware
configuration information can be found in the User’s Manual
included with this controller or online at www.gefran.com
If needed, automatic tuning (Self-Tune) can be enabled
with the following steps
• Pressandhold
F
untilCFGappears
• Press
F
once,S.Tuappears—ENTER2
• Press
F
once
• Cyclepowertothecontroller
• LED3(
L3
)willflashduringthetuningprocess
Withthemachineatambienttemperatureand
thecontrolsetpoint(SV)set...
Self-TunewillautomaticallysavenewPID
valuesoncecomplete
Note
Change all menu parameters by
using the front panel buttons
GETTING STARTED
• Unpack Contents
• Verify model numberand application
• Power Controller
• Program for yourapplication
Program Your Gefran Controller
2
*Parametermaybeleftatdefaultvalueforinputtypes0...37
Input Sensor
Sensor Type Sensor Type
0 TCJ°C 30 PT100°C
1 TCJ°F 31 PT100°F
2 TCK°C 32 JPT100°C
3 TCK°F 33 JPT100°F
4 TCR°C 34 PTC°C
5 TCR°F 35 PTC°F
6 TCS°C 36 NTC°C
7 TCS°F 37 NTC°F
8 TCT°C 44 4...20mA
9 TCT°F 46 0...10V
Connect Your Controller
3
What’s Included
• 96x96 DIN 1300-RD00-00-0-x
Gefran Controller x2
• Mounting Bracket
• Panel Sealing Gasket
• Screw Terminal Cover x2
• Multi-Language Manual
1
• Pressandhold
F
untilPASappears—ENTER99
• Press
F
once,Proappears—ENTER128
• Press
F
once,PASappears—ENTER99
• Pressandhold
F
untilHrdappears
• Press
F
repeatedlyuntilbutappears—ENTER1
• Pressandhold
F
until1 nPappears
• Press
F
twice,tYPappears—ENTERtheInputSensornumber
fromthelist
• Press
F
repeatedlyuntilLo.S*appears—ENTERtheminimumInputScalelimit
• Press
F
once,H i.S*appears—ENTERthemaximumInputScalelimit
• Press
F
repeatedlyuntilLo.L*appears—ENTERtheminimumAlarmScalelimit
• Press
F
once,H i.L*appears—ENTERthemaximumAlarmScalelimit
• Pressandhold
F
untilyoureturntothemainprocessdisplay.ThisisthedisplayafterPAS
andwillbeindicatedbytheProcessVariableifaninputsensorisconnected,orLo,H i,Sbr,
Errifnoinputisconnected.
• Usethe
and
buttonstoadjustthecontrolsetpoint(SV)fromthemaindisplay.
• Press
F
oncefromthemaindisplay,AL.1appearstoadjusttheAlarm1setpoint.
• Press the
buttontoswitchbetween automatic andmanualcontrol modes fromthe
maindisplay.LED1(
L1
)willlightwhileinmanualmode.
POWER
Additional wiring
configurations
are available
in the User’s
Manual and
General Setup
Guide
Quick Start Guide
1300-RD00-00-0-x Programmable PID Controller
2
-
1
+
7
8
11
10
6
-
5
+
ALARM
Heat & Alarm
HEATER
POWER CONTROL
THERMOCOUPLE
1 / 7
GEFRAN SpA
Via Sebina, 74 - 25050 PROVAGLIO D’ISEO (BS) ITALY
Note
Change all menu parameters by
using the front panel buttons
GETTING STARTED
• Unpack Contents
• Verify model numberand application
• Power Controller
• Program for yourapplication
Program Your Gefran Controller
2
*Parametermaybeleftatdefaultvalueforinputtypes0...37
Input Sensor
Sensor Type Sensor Type
0 TCJ°C 30 PT100°C
1 TCJ°F 31 PT100°F
2 TCK°C 32 JPT100°C
3 TCK°F 33 JPT100°F
4 TCR°C 34 PTC°C
5 TCR°F 35 PTC°F
6 TCS°C 36 NTC°C
7 TCS°F 37 NTC°F
8 TCT°C 44 4...20mA
9 TCT°F 46 0...10V
Connect Your Controller
3
What’s Included
• 96x96 DIN 1300-RRR0-00-0-x
Gefran Controller x2
• Mounting Bracket
• Panel Sealing Gasket
• Screw Terminal Cover x2
• Multi-Language Manual
1
• Pressandhold
F
untilPASappears—ENTER99
• Press
F
once,Proappears—ENTER128
• Press
F
once,PASappears—ENTER99
• Pressandhold
F
untilHrdappears
• Press
F
twice,Ctrappears—ENTER14
• Press
F
twice,
butappears—ENTER1
• Pressandhold
F
until
CFGappears
• Pressandhold
F
until
C.Meappears
—ENTER 0 coolingwithAir
—ENTER 1 coolingwithOil
—ENTER 0 coolingwithWater
• Pressandhold
F
until1 nPappears
• Press
F
twice,tYPappears—ENTERtheInputSensornumberfromthelist
• Press
F
repeatedlyuntilLo.S*appears—ENTERtheminimumInputScalelimit
• Press
F
once,H i.S*appears—ENTERthemaximumInputScalelimit
• Press
F
repeatedlyuntilLo.L*appears—ENTERtheminimumAlarmScalelimit
• Press
F
once,H i.L*appears—ENTERthemaximumAlarmScalelimit
• Pressandhold
F
until
Outappears
• Press
F
threetimes,rl.1appears—ENTER1
• Press
F
twice,rl.3appears—ENTER 2
• Pressandhold
F
untilyoureturntothemainprocessdisplay.ThisisthedisplayafterPAS
andwillbeindicatedbytheProcessVariableifaninputsensorisconnected,orLo,H i,Sbr,
Errifnoinputisconnected.
• Usethe
and
buttonstoadjustthecontrolsetpoint(SV)fromthemaindisplay.
• Press
F
oncefromthemaindisplay,AL.1appearstoadjusttheAlarm1setpoint.
• Press the
buttontoswitchbetween automatic andmanualcontrol modes fromthe
maindisplay.LED1(
L1
)willlightwhileinmanualmode.
POWER
This Quick Start Guide provides basic information on
setting up the Gefran 1300 controller for the application
referenced above. Additional software and hardware
configuration information can be found in the User’s Manual
included with this controller or online at www.gefran.com
If needed, automatic tuning (Self-Tune) can be enabled
with the following steps
• Pressandhold
F
untilCFGappears
• Press
F
once,S.Tuappears—ENTER2
• Press
F
once
• Cyclepowertothecontroller
• LED3(
L3
)willflashduringthetuningprocess
Withthemachineatambienttemperatureand
thecontrolsetpoint(SV)set...
Self-TunewillautomaticallysavenewPID
valuesoncecomplete
Additional wiring
configurations are
available in the User’s
Manual and General
Setup Guide
Quick Start Guide
1300-RRR0-00-0-x Programmable PID Controller
12
13
1
+
2
-
5
7
8
11
10
6
ALARM
COOLING
HEATER
Heat - Cool - Alarm
THERMOCOUPLE
2 / 7
GEFRAN SpA
Via Sebina, 74 - 25050 PROVAGLIO D’ISEO (BS) ITALY
Note
Change all menu parameters by
using the front panel buttons
GETTING STARTED
• Unpack Contents
• Verify model numberand application
• Power Controller
• Program for yourapplication
Program Your Gefran Controller
2
*Parametermaybeleftatdefaultvalueforinputtypes0...37
Input Sensor
Sensor Type Sensor Type
0 TCJ°C 30 PT100°C
1 TCJ°F 31 PT100°F
2 TCK°C 32 JPT100°C
3 TCK°F 33 JPT100°F
4 TCR°C 34 PTC°C
5 TCR°F 35 PTC°F
6 TCS°C 36 NTC°C
7 TCS°F 37 NTC°F
8 TCT°C 44 4...20mA
9 TCT°F 46 0...10V
Connect Your Controller
3
Additional wiring
configurations
are available
in the User’s
Manual and
General Setup
Guide
What’s Included
• 96x96 DIN 1300-RR00-00-0-x
Gefran Controller
• Mounting Bracket
• Panel Sealing Gasket
• Screw Terminal Cover x2
• Multi-Language Manual
1
• Pressandhold
F
untilPASappears—ENTER99
• Press
F
once,Proappears—ENTER128
• Press
F
once,PASappears—ENTER99
• Pressandhold
F
untilHrdappears
• Press
F
twice,Ctrappears—ENTER14
• Press
F
once,
AL.nappears—ENTER0
• Pressandhold
F
until
CFGappears
• Pressandhold
F
until
C.Meappears
—ENTER 0 coolingwithAir
—ENTER 1 coolingwithOil
—ENTER 0 coolingwithWater
• Pressandhold
F
until1 nPappears
• Press
F
twice,tYPappears—ENTERtheInputSensornumber
• Press
F
repeatedlyuntilLo.S*appears—ENTERtheminimumInputScalelimit
• Press
F
once,H i.S*appears—ENTERthemaximumInputScalelimit
• Press
F
repeatedlyuntilLo.L*appears—ENTERtheminimumAlarmScalelimit
• Press
F
once,H i.L*appears—ENTERthemaximumAlarmScalelimit
• Pressandhold
F
until
Outappears
• Press
F
once,rl.1appears—ENTER1
• Pressandhold
F
untilyoureturntothemainprocessdisplay.ThisisthedisplayafterPAS
andwillbeindicatedbytheProcessVariableifaninputsensorisconnected,orLo,H i,Sbr,
Errifnoinputisconnected.
• Usethe
and
buttonstoadjustthecontrolsetpoint(SV)fromthemaindisplay.
• Press the
buttontoswitchbetween automatic andmanualcontrol modes fromthe
maindisplay.LED1(
L1
)willlightwhileinmanualmode.
POWER
This Quick Start Guide provides basic information on
setting up the Gefran 1300 controller for the application
referenced above. Additional software and hardware
configuration information can be found in the User’s Manual
included with this controller or online at www.gefran.com
If needed, automatic tuning (Self-Tune) can be enabled
with the following steps
• Pressandhold
F
untilCFGappears
• Press
F
once,S.Tuappears—ENTER2
• Press
F
once
• Cyclepowertothecontroller
• LED3(
L3
)willflashduringthetuningprocess
Withthemachineatambienttemperatureand
thecontrolsetpoint(SV)set...
Self-TunewillautomaticallysavenewPID
valuesoncecomplete
Quick Start Guide
1300-RR00-00-0-x Programmable PID Controller
11
10
2
-
1
+
7
8
5
6
COOLING
HEATER
Heat - Cool
THERMOCOUPLE
3 / 7
GEFRAN SpA
Via Sebina, 74 - 25050 PROVAGLIO D’ISEO (BS) ITALY
This Quick Start Guide provides basic information on
setting up the Gefran 1300 controller for the application
referenced above. Additional software and hardware
configuration information can be found in the User’s Manual
included with this controller or online at www.gefran.com
If needed, automatic tuning (Self-Tune) can be enabled
with the following steps
• Pressandhold
F
untilCFGappears
• Press
F
once,S.Tuappears—ENTER2
• Press
F
once
• Cyclepowertothecontroller
• LED3(
L3
)willflashduringthetuningprocess
Withthemachineatambienttemperatureand
thecontrolsetpoint(SV)set...
Self-TunewillautomaticallysavenewPID
valuesoncecomplete
Note
Change all menu parameters by
using the front panel buttons
GETTING STARTED
• Unpack Contents
• Verify model numberand application
• Power Controller
• Program for yourapplication
Program Your Gefran Controller
2
*Parametermaybeleftatdefaultvalueforinputtypes0...37
Input Sensor
Sensor Type Sensor Type
0 TCJ°C 30 PT100°C
1 TCJ°F 31 PT100°F
2 TCK°C 32 JPT100°C
3 TCK°F 33 JPT100°F
4 TCR°C 34 PTC°C
5 TCR°F 35 PTC°F
6 TCS°C 36 NTC°C
7 TCS°F 37 NTC°F
8 TCT°C 44 4...20mA
9 TCT°F 46 0...10V
Connect Your Controller
3
What’s Included
• 96x96 DIN 1300-RR00-00-0-x
Gefran Controller x2
• Mounting Bracket
• Panel Sealing Gasket
• Screw Terminal Cover x2
• Multi-Language Manual
1
• Pressandhold
F
untilPASappears—ENTER99
• Press
F
once,Proappears—ENTER128
• Press
F
once,PASappears—ENTER99
• Pressandhold
F
untilHrdappears
• Press
F
repeatedlyuntilbutappears—ENTER1
• Pressandhold
F
until1 nPappears
• Press
F
twice,tYPappears—ENTERtheInputSensornumber
fromthelist
• Press
F
repeatedlyuntilLo.S*appears—ENTERtheminimumInputScalelimit
• Press
F
once,H i.S*appears—ENTERthemaximumInputScalelimit
• Press
F
repeatedlyuntilLo.L*appears—ENTERtheminimumAlarmScalelimit
• Press
F
once,H i.L*appears—ENTERthemaximumAlarmScalelimit
• Pressandhold
F
untilyoureturntothemainprocessdisplay.ThisisthedisplayafterPAS
andwillbeindicatedbytheProcessVariableifaninputsensorisconnected,orLo,H i,Sbr,
Errifnoinputisconnected.
• Usethe
and
buttonstoadjustthecontrolsetpoint(SV)fromthemaindisplay.
• Press
F
oncefromthemaindisplay,AL.1appearstoadjusttheAlarm1setpoint.
• Press the
buttontoswitchbetween automatic andmanualcontrol modes fromthe
maindisplay.LED1(
L1
)willlightwhileinmanualmode.
POWER
Quick Start Guide
1300-RR00-00-0-x Programmable PID Controller
11
10
2
-
1
+
Additional wiring
configurations
are available
in the User’s
Manual and
General Setup
Guide
7
8
5
6
HEATER
ALARM
Heat & Alarm
THERMOCOUPLE
4 / 7
GEFRAN SpA
Via Sebina, 74 - 25050 PROVAGLIO D’ISEO (BS) ITALY
Note
Change all menu parameters by
using the front panel buttons
GETTING STARTED
• Unpack Contents
• Verify model numberand application
• Power Controller
• Program for yourapplication
Program Your Gefran Controller
2
*Parametermaybeleftatdefaultvalueforinputtypes0...37
Input Sensor
Sensor Type Sensor Type
0 TCJ°C 30 PT100°C
1 TCJ°F 31 PT100°F
2 TCK°C 32 JPT100°C
3 TCK°F 33 JPT100°F
4 TCR°C 34 PTC°C
5 TCR°F 35 PTC°F
6 TCS°C 36 NTC°C
7 TCS°F 37 NTC°F
8 TCT°C 44 4...20mA
9 TCT°F 46 0...10V
Connect Your Controller
3
What’s Included
• 96x96 DIN 1300-RDR0-00-0-x
Gefran Controller x2
• Mounting Bracket
• Panel Sealing Gasket
• Screw Terminal Cover x2
• Multi-Language Manual
1
• Pressandhold
F
untilPASappears—ENTER99
• Press
F
once,Proappears—ENTER128
• Press
F
once,PASappears—ENTER99
• Pressandhold
F
untilHrdappears
• Press
F
twice,Ctrappears—ENTER14
• Press
F
twice,
butappears—ENTER1
• Pressandhold
F
until
CFGappears
• Pressandhold
F
until
C.Meappears
—ENTER 0 coolingwithAir
—ENTER 1 coolingwithOil
—ENTER 0 coolingwithWater
• Pressandhold
F
until1 nPappears
• Press
F
twice,tYPappears—ENTERtheInputSensornumberfromthelist
• Press
F
repeatedlyuntilLo.S*appears—ENTERtheminimumInputScalelimit
• Press
F
once,H i.S*appears—ENTERthemaximumInputScalelimit
• Press
F
repeatedlyuntilLo.L*appears—ENTERtheminimumAlarmScalelimit
• Press
F
once,H i.L*appears—ENTERthemaximumAlarmScalelimit
• Pressandhold
F
until
Outappears
• Press
F
threetimes,rl.1appears—ENTER1
• Press
F
twice,rl.3appears—ENTER 2
• Pressandhold
F
untilyoureturntothemainprocessdisplay.ThisisthedisplayafterPAS
andwillbeindicatedbytheProcessVariableifaninputsensorisconnected,orLo,H i,Sbr,
Errifnoinputisconnected.
• Usethe
and
buttonstoadjustthecontrolsetpoint(SV)fromthemaindisplay.
• Press
F
oncefromthemaindisplay,AL.1appearstoadjusttheAlarm1setpoint.
• Press the
buttontoswitchbetween automatic andmanualcontrol modes fromthe
maindisplay.LED1(
L1
)willlightwhileinmanualmode.
POWER
This Quick Start Guide provides basic information on
setting up the Gefran 1300 controller for the application
referenced above. Additional software and hardware
configuration information can be found in the User’s Manual
included with this controller or online at www.gefran.com
If needed, automatic tuning (Self-Tune) can be enabled
with the following steps
• Pressandhold
F
untilCFGappears
• Press
F
once,S.Tuappears—ENTER2
• Press
F
once
• Cyclepowertothecontroller
• LED3(
L3
)willflashduringthetuningprocess
Withthemachineatambienttemperatureand
thecontrolsetpoint(SV)set...
Self-TunewillautomaticallysavenewPID
valuesoncecomplete
Additional wiring
configurations are
available in the User’s
Manual and General
Setup Guide
Quick Start Guide
12
13
11
10
ALARM
+
-
1
2
1
2
+
-
1
2
1300-RDR0-00-0-x Programmable PID Controller
Heat - Cool - Alarm
COOLING
HEATER
POWER CONTROL
THERMOCOUPLE
5 / 7
GEFRAN SpA
Via Sebina, 74 - 25050 PROVAGLIO D’ISEO (BS) ITALY
Note
Change all menu parameters by
using the front panel buttons
GETTING STARTED
• Unpack Contents
• Verify model numberand application
• Power Controller
• Program for yourapplication
Program Your Gefran Controller
2
*Parametermaybeleftatdefaultvalueforinputtypes0...37
Input Sensor
Sensor Type Sensor Type
0 TCJ°C 30 PT100°C
1 TCJ°F 31 PT100°F
2 TCK°C 32 JPT100°C
3 TCK°F 33 JPT100°F
4 TCR°C 34 PTC°C
5 TCR°F 35 PTC°F
6 TCS°C 36 NTC°C
7 TCS°F 37 NTC°F
8 TCT°C 44 4...20mA
9 TCT°F 46 0...10V
Connect Your Controller
3
Additional wiring
configurations
are available
in the User’s
Manual and
General Setup
Guide
What’s Included
• 96x96 DIN 1300-RD00-00-0-x
Gefran Controller
• Mounting Bracket
• Panel Sealing Gasket
• Screw Terminal Cover x2
• Multi-Language Manual
1
• Pressandhold
F
untilPASappears—ENTER99
• Press
F
once,Proappears—ENTER128
• Press
F
once,PASappears—ENTER99
• Pressandhold
F
untilHrdappears
• Press
F
twice,Ctrappears—ENTER14
• Press
F
once,
AL.nappears—ENTER0
• Pressandhold
F
until
CFGappears
• Pressandhold
F
until
C.Meappears
—ENTER 0 coolingwithAir
—ENTER 1 coolingwithOil
—ENTER 0 coolingwithWater
• Pressandhold
F
until1 nPappears
• Press
F
twice,tYPappears—ENTERtheInputSensornumber
• Press
F
repeatedlyuntilLo.S*appears—ENTERtheminimumInputScalelimit
• Press
F
once,H i.S*appears—ENTERthemaximumInputScalelimit
• Press
F
repeatedlyuntilLo.L*appears—ENTERtheminimumAlarmScalelimit
• Press
F
once,H i.L*appears—ENTERthemaximumAlarmScalelimit
• Pressandhold
F
until
Outappears
• Press
F
once,rl.1appears—ENTER1
• Pressandhold
F
untilyoureturntothemainprocessdisplay.ThisisthedisplayafterPAS
andwillbeindicatedbytheProcessVariableifaninputsensorisconnected,orLo,H i,Sbr,
Errifnoinputisconnected.
• Usethe
and
buttonstoadjustthecontrolsetpoint(SV)fromthemaindisplay.
• Press the
buttontoswitchbetween automatic andmanualcontrol modes fromthe
maindisplay.LED1(
L1
)willlightwhileinmanualmode.
POWER
This Quick Start Guide provides basic information on
setting up the Gefran 1200 controller for the application
referenced above. Additional software and hardware
configuration information can be found in the User’s Manual
included with this controller or online at www.gefran.com
If needed, automatic tuning (Self-Tune) can be enabled
with the following steps
• Pressandhold
F
untilCFGappears
• Press
F
once,S.Tuappears—ENTER2
• Press
F
once
• Cyclepowertothecontroller
• LED3(
L3
)willflashduringthetuningprocess
Withthemachineatambienttemperatureand
thecontrolsetpoint(SV)set...
Self-TunewillautomaticallysavenewPID
valuesoncecomplete
Quick Start Guide
1300-RD00-00-0-x Programmable PID Controller
2
-
1
+
7
8
11
10
6
-
5
+
COOLING
Heat - Cool
HEATER
POWER CONTROL
THERMOCOUPLE
6 / 7
Gefran 1300: Temperature
Controller, Quick Start Guide
Tel: +27 11 966 9800 (JHB)
+27 21 762 8995 (CT)
[email protected]
www.unitemp.com/contact
Powered by TCPDF (www.tcpdf.org)
7 / 7
/