One PEX-P8R8i/P16R16i series card
One companion PCI CD (V4.7 or later)
One Quick Start Guide (This document)
One CA-4002 D-Sub connector for PEX-P8R8i
One CA-4073W cable and two CA-4002 D-Sub
connector for PEX-P16R16i
for PEX-P8R8i/P16R16i
English/ Version 1.1/ April 2010
for PEX-P8R8i/P16R16i
English/ April 2010/ Version 1.1
Software Utility CD
CA-4037W Cable
CA-4002 D-Sub Connector
Quick Start Guide
PEX-P8R8i/P16R16i
Series Card
1
PEX-P8R8i/P16R16i Quick Start Guide
What’s in your package?
Installing Windows Driver
Follow these steps:
1. Setup the Windows driver. The driver is located at:
CD:\NAPDOS\PCI\PISO-DIO\DLL_OCX\Driver\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/piso-dio/dll_ocx/driver/
The Windows driver only supports Windows 98/NT/2000/ and 32-bit
Windows XP/2003/Vista/7 Versions.
2. Click the “Next>” button to start the installation.
3. Click the “N
ext>” button to install the driver into the default folder.
4. Click the “I
nstall” button to continue the installation.
5. Select “NO, I will restart my computer later” and then click the
“F
inish” button.
Jumper & Card ID Setting
2
PEX-P8R8i/P16R16i Quick Start Guide
SW1 Card ID Setting
AC Filter Jumpers
Follow these steps:
1. Shut down and power off your computer.
2. Remove the cover from the computer.
3. Select an unused PCI-Express slot.
4. Carefully insert PEX-P8R8i/P16R16i into the PCI-Express slot.
5. Replace the PC cover.
6. Power on the computer.
After powering-on the computer, please finish the Plug&Play
steps according to the prompt message.
3
PEX-P8R8i/P16R16i Quick Start Guide
Card ID
1
ID0
2
ID1
3
ID2
4
ID3
(*) 0 OFF OFF OFF OFF
ON OFF OFF 1 OFF
2 ON OFF OFF OFF
: : : : :
ON ON ON OFF 13
ON ON ON OFF 14
ON ON ON ON 15
(Default Setting)
(*) Default setting
Jumper
Channel
Jumper Channel
DI0 DI8
JP1 JP9
DI1 DI9
JP2 JP10
DI2 DI10
JP3 JP11
DI3 DI11
JP4 JP12
DI4 DI12
JP5 JP13
JP6
DI5
JP14
DI13
JP7
DI6
JP15
DI14
JP8
DI7
JP16
DI15
(Default Setting)
Installing Hardware on PC
Pin Assignments
PEX-P8R8i/P16R16i CON1 (Female DB37)
PEX-P16R16i CON2 (40-pin box header)
4
PEX-P8R8i/P16R16i Quick Start Guide
40-Pin D-Sub Connector
37-Pin D-Sub Connector
Self Test
1. Prepare for device:
z DN-37 (Optional) wiring terminal board.
z Exterior power supply device. For example: DP-665(Optional)
2. Use the DN-37 to connect the board CON1.
3. Connect the External Power +24V
to CON1.NO0
...... Connect the External Power +24V
to CON1.NO7.
4. Connect the External Power GND
to CON1.GND and
CON1.DIB0
...... CON1.DIB7.
5. Connect the CON1.COM0
with CON1.DIA0
...... Connect the CON1.COM7
with CON1.DIA7.
5
PEX-P8R8i/P16R16i Quick Start Guide
6. Execute the P8R8/P16R16U sample program.
The sample program is contained in:
CD:\NAPDOS\PCI\PISO-DIO\DLL_OCX\Demo\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/piso-dio/dll_ocx/demo/
7. The following sample program for Visual Basic.
Path: ....\dll_vb6_xxxxxx\DLL_VB6\P16R16U
Double click the “DIO.exe”
8. Verify total numbers of the PEX-PxRxi card and
Perform DIO(0-7) functions test.
Indicate how many PEX-PxRxi cards are successfully
installed on this PC.
Select the board to activate. (It ranges form 0 to
total board number subtractin
g
one
)
.
Click to start DIO test.
6
PEX-P8R8i/P16R16i Quick Start Guide
9. Get DIO(0-7) function test result.
Verify Card ID. (Which has to be the same as setting
in
SW1.)
Click channel 0、2、4、6 in DO.
The DI status should show current status--channel
0、2、4、6 now in hi
g
h state.
(
Red li
g
ht
)
A
dditional Information
PEX-P8R8i/P16R16i Series Card Product page:
http://www.icpdas.com/products/DAQ/pc_based/piso_p16r16u.htm
DP-665, CA-3710 and DN-37 page (Optional):
http://www.icpdas.com/products/Accessories/power_supply/dp-665.htm
http://www.icpdas.com/products/Accessories/cable/cable_selection.htm
http://www.icpdas.com/products/DAQ/screw_terminal/dn_37.htm
Documentation:
CD:\NAPDOS\PCI\PISO-DIO\Manual
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/piso-dio/manual/
Software:
CD:\NAPDOS\PCI\PISO-DIO
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/piso-dio
ICP DAS Website: http://www.icpdas.com
Contact Us (E-Mail): Service @ icpdas.com
Copyright @ 2010 by ICP DAS Co., Ltd. All Rights Reserved.
7
/