for PEX-P8R8i/P16R16i
nglish/ Version 1.1/ April 2010
One PEX-D24/PEX-D56 series card
One software utility PCI CD (V5.1 or later)
One Quick Start Guide (This document)
E
for PEX-D24/D56
English/ Feb. 2011/ Version 1.1
What’s in the shipping
package?
Quick Start Guide
PEX-D24/PEX-D56
Software Utility CD
Series Card
1
PEX-D24/PEX-D56 Quick Start Guide
Installing Windows Driver
Follow these steps:
1. Setup the Windows driver. The driver is located at:
The UniDAQ driver supports 32-bit/64-bit Windows XP/2003/Vista/2008/7; it is
recommended to install this driver for new user:
CD:\NAPDOS\PCI\UniDAQ\DLL\Driver\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
The PIO-DIO driver supports Windows 98/NT/2K and 32-bit XP/2003/Vista/7.
Recommended to install this driver for have been used PIO-DIO series boards of
regular user, please refer to:
CD:\NAPDOS\PCI\PIO-DIO\manual\QuickStart\PID-D24U_56U_QuickStart_Eng.pdf
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pio-dio/manual/quickstart/pio-
d24u_56u_quickstart_eng.pdf
2. Click the “Next>” button to start the installation.
3. Click the “N
ext>” button to install the driver into the default folder.
4. Click the “I
nstall” button to continue the installation.
5. Select “NO, I will restart my computer later” and then click the
“F
inish” button.
Follow these steps:
1. Shut down and power off your computer.
2. Remove the cover from the computer.
3. Select an unused PCI Express slot.
4. Carefully insert your I/O card into the PCI Express slot.
5. Replace the PC cover.
6. Power on the computer.
After powering-on the computer, please finish the Plug&Play
steps according to the prompted messages.
Installing Hardware on PC
2
PEX-D24/PEX-D56 Quick Start Guide
This example
uses this driver
Pin Assignments
CON3 programmable I/O Connector (Female DB37)
P0A1
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
17
16
15
14
13
12
11
10
9
8
18
7
6
5
4
3
2
1
P0A2
N.C.
GND
Vcc
P0A0
P0A5
P0A6
P0A4
P0A3
N.C.
GND
P1B2
P1B0
P0A7
P2C0
P2C4
P2C3
P2C5
Vcc
P2C6
CON1
P2C1
P2C2
N.C.
P1B7
P2C7
N.C.
GND
P1B3
P1B4
P1B5
P1B6
19
GND
P1B1
GND
N.C.
GND
CON2 Digital Input Connector (for PEX-D56 only)
CON1 Digital Output Connector (for PEX-D56 only)
DO 15
20
18
16
14
12
10
8
6
4
17
15
13
11
9
7
5
3
1
19
DO 13
DO 14
GND
Vcc
GND
+12V
DO 7
DO 5
DO 9
DO 11
DO 8
DO 6
DO 10
DO 12
DO 2
DO 4
DO 3
DO 0
CON3
2
DO 1
DI15
20
18
16
14
12
10
8
6
4
17
15
13
11
9
7
5
3
1
19
DI13
DI 14
GND
Vcc
GND
+12V
DI 7
DI 5
DI 9
DI11
DI 8
DI 6
DI 10
DI 12
DI 2
DI 4
DI 3
DI 0
CON2
2
DI 1
All Signals are TTL Compatible
High (1) 2.0 ~ 5.0 V(Voltage over 5.0V will damage the device)
None Define 2.0 V ~ 0.8 V
Low(0) Under 0.8 V
3
PEX-D24/PEX-D56 Quick Start Guide
CON1
CON2
CON3
Self Test
DIO Test Wiring:
1. Use DN-37 (optional) to connect the Port 0 with Port 1.
P0A0 connect to P1B0 .... P0A7 connect to P1B7。
(Pin 37
connect to Pin 10 .... Pin 30 connect to Pin 03)
Execute the Digital IO sample program:
2. The sample program is contained in:
CD:\NAPDOS\PCI\UniDAQ\DLL\Demo\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/demo/
CON1 and CON2 for
PEX-D56 only
4
PEX-D24/PEX-D56 Quick Start Guide
CON3
3. The following sample program is written in Delphi4.
File: DLL_delphi4_xxxxxx.exe
Path: ....\ DLL_Delphi4\Digital_IO\
Double click the “Digital_IO.exe”
4. Set the test program.
Select the board
number for the PIO-D24/D56 to activate.
1
(It ran
g
es form 0 to total board number subtractin
g
one)
Select the Port 0 in the Output port drop down list.
2
Select the Port 1 in the Input port drop down list.
3
Click this button to start test.
4
1
2
3
4
5
PEX-D24/PEX-D56 Quick Start Guide
5. Get DIO function test result.
6
5
The Digital Input status should show current status--
channel 0、2、4、6 now in high state. (Red light)
Click channel 0、2、4、6 in Digital Output field.
5
Related Information
PEX-D24/D56 Series Card product page:
http://www.icpdas.com/products/DAQ/pc_based/pio_d56_24.htm
DN-37 page (optional):
http://www.icpdas.com/products/DAQ/screw_terminal/dn_37.htm
6
Documentation:
CD:\NAPDOS\PCI\PIO-DIO\Manual
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pio-dio/manual/
CD:\NAPDOS\PCI\UniDAQ\Manual
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/maunal/
Software:
CD:\NAPDOS\PCI\UniDAQ\DLL
http://www.icpdas.com/download/pci/pio-dio.htm
6
ICP DAS Web Site: http://www.icpdas.com
Contact Us (E-Mail): service@icpdas.com , [email protected]
Copyright © 2010 by ICP DAS Co., Ltd. All Rights Reserved.
/
