A s s e m b l y I n s t r u c t i o n s - s e e D i a g r a m A
1887.1 DSLR Top Mount Kit for Gamma
1. Loosen the Clamp Wingnut and rotate the Clamp 90° to
allow access to the Mount Screw.
2. Using a flathead screwdriver, tighten the Mount Screw
firmly to the DSLR Top Mount. Do not overtighten.
3. Rotate the Strap Knob counterclockwise until the small
end of the Gamma can be slid into the Flashlight Mount.
4. Rotate Strap Knob clockwise to tighten Strap around
Gamma light. DO NOT overtighten! Overtightening may
cause the strap threads to skip.
5. Adjust Gamma to desired position.
- To attach the 1870 Diffuser to your Gamma Light, rotate
the diffuser clockwise to thread into the front of the
Gamma. DO NOT overtighten or cross-thread.
Based on our popular SA-100 1” (2.5cm) diameter ball
socket arm system, this mount kit includes everything you
need to use your Gamma as a focus assist or macro video
light. Attach any Gamma flashlight to an Ikelite DSLR
housing featuring a top mount. Gamma flashlight not
included.
2
Included in Kit
1/4-20 x 7/8”
Mount Screw
Strap Knob
Strap
Wingnut
9571.6 DSLR top mount 1” ball
1870 Diffuser with Lanyard
- 1870 Diffuser with Lanyard
- 1881 Flashlight Mount for 1” Ball Systems
- 9571.2 Clamp
- 9571.6 DSLR Top Mount 1” B all
- 1/4-20 x 7/8” Mount Screw
9571.2 Clamp
Flashlight Mount for
1” Ball Systems
Diagram A
3
IKELITE
1/4-20 x 7/8”
Mount Screw
DSLR Top Mount 1” Ball
Clamp Wingnut
DSLR Top Mount
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2014 Ikelite Underwater Systems
1887.1_DSLR_Top_Mount_Kit_Gamma_01-0514
/
