Omron Handheld EtherNet/IP Config User guide

Hello, I have read the Configuration Guide for adding EtherNet/IP Adapter to Handheld Barcode Readers. The document details how to set up an EtherNet/IP adapter with various handheld barcode readers, including corded and cordless options. It also covers the necessary network adapters, connection cables, power supplies, and required firmware. I am ready to answer your questions about this document and the devices described in it.
What are the corded handheld reader options?

Which network adapters are available?

What is the required firmware version for EtherNet/IP?

Omron Automation Americas

2895 Greenspoint Parkway, Suite 200, Hoffman Estates, IL 60169

2801 Rochelle Rd., Suite 100, DFW Airport, TX 75261

100 Consilium Place, Suite 802, Toronto, Ontario, M1H 3E3

Configuration Guide for adding EtherNet/IP

Adapter to Handheld Barcode Readers

Version 1.0, June-2022

Table of Contents

Configuration Diagram ....................................................................................................................... 2

Selecting a Handheld Reader ............................................................................................................. 3

Choosing a Network Adapter ............................................................................................................. 3

Required Connection Cable ............................................................................................................... 3

Power Supply Options ........................................................................................................................ 3

Example Bill of Materials .................................................................................................................... 3

Required Firmware for EtherNet/IP ................................................................................................... 4

Omron Automation Americas

Configuration Diagram

Omron Automation Americas

Select the handheld barcode reader

 Corded options from V410-H, HS360X Corded

 Cordless option to connect to HS360X Base

Choose the appropriate Network Adapter

 Network Adapters are available for EtherNet/IP and PROFINET

 EtherNet/IP Adapter: EA3600-R1CP-11

 PROFINET Adapter: EA3600-S1CP-11

Required Connection Cable

 Adapter to Handheld Cable: CBA-RF2-CO9ZAR

Power Supply Options

 Power the adapter from 24VDC through the supplied

terminals

 Powered by optional AC adapter

Example BOM for handheld to EtherNet/IP Adapter

Omron Automation Americas

Required firmware for EtherNet/IP

Please confirm that you are using “Product Software Revision” PAADRC01-001-R02 for the

EtherNet/IP adapter part number EA3600-R1CP-11

Using the Ethernet Configuration utility, the Status Log should look similar to the image below. IP

addresses may be set according to your individual application.

If the software is not the correct version:

a. Launch the industrial Ethernet Utility.exe

b. Connect to EA3600

c. Transfer the file CAADRC01-001-R02D0.HEX to the unit

A successful update will look similar to the image below