USER MANUAL DAB-DG120-SIL
1
Please read carefully before use
USER MANUAL DAB-DG120-SIL
2
IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS
- Read all instructions carefully before use.
- Retain manuals for future reference.
- Use this product only in the manner described.
- Only use a water-dampened soft-cloth to clean the surface of this product.
- The following will damage this product: any liquid such as water or moisture, extreme
heat; cold; humidity, dusty or sandy environments.
- This product has re-moveable batteries, remove them before long periods of in-active use.
Removing the batteries prevents damage due to leakage. Always insert batteries
according to the + and - signs and replace both batteries with the same type at the
same time.
- There are no user serviceable parts in this product.
- Un-authorized attempts to dismantle or repair this product will void product warranty and
may result in dangerous electric shock.
- Remove any power or data cords by pulling them from the plug and not the cord.
- Do not use this product in electrical storms.
TABLE OF CONTENTS
PRODUCT CONNECTIONS AND USE 3
DAB+ MODE 4
AM / FM MODE 5
AUX MODE 5
SETTING UP PRESET STATIONS 5
BROWSE STATION INFORMATION 5
SETTING THE CLOCK 6
SETTING THE ALARM 6
FACTORY RESET 6
WHAT’S IN THE BOX 7
TROUBLE SHOOTING / Q & A 7
USER MANUAL DAB-DG120-SIL
3
PRODUCT CONNECTIONS AND USE
1. STANDBY
PRESS Turn radio ON or OFF
2. MODE
PRESS to switch between DAB+, FM, AM Radio and AUX (Auxiliary Input)
PRESS and HOLD to reset to factory settings (Press ENTER to confirm)
3. INFO
PRESS to toggle radio station broadcast information
PRESS and HOLD to adjust the clock.
4. PRESET PRESS to set or select saved favourite radio stations
5. ALARM
PRESS the ALARM button to scroll through settings, the VOLUME dial to
adjust settings and the ENTER button to conform your choice.
6. SCAN
From DAB mode: Perform full scan
From AM mode: PRESS to scan to next available channel
From FM mode: PRESS to scan to next available channel
PRESS and HOLD to adjust clock settings
7. TUNE -
From DAB mode: PRESS to move to the previous channel
From AM mode: PRESS to move back one frequency increment, or PRESS and
hold to rapid search to a frequency.
From FM mode: PRESS to move back one frequency increment, or PRESS and
hold to rapid search to a frequency.
8. TUNE +
From DAB mode: PRESS to move to the next channel
From AM mode: PRESS to move forward one frequency increment, or PRESS
and hold to rapid search to a frequency.
From FM mode: PRESS to move forward one frequency increment, or PRESS
and hold to rapid search to a frequency.
9. VOLUME / ENTER
/ SNOOZE
TURN to adjust volume
PRESS to ENTER or confirm settings options
10. DISPLAY Digital Display
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
USER MANUAL DAB-DG120-SIL
4
1 Telescopic Antenna
2 4 x AA Battery compartment
3 AUX Audio input
4 Headphone Audio Output
5
Power Socket (Mains Power
Adaptor)
DAB+ MODE
Press the MODE button to set the device to DAB+ mode
NOTE 1: Perform a full station auto-scan before using your DG120 for the first time
NOTE 2: Digital Radio’s do not pick up new channels automatically. When moving from one
location to another, it is recommended that you perform another full scan. You may be
unaware of new stations in your new location.
Auto Scan:
1) Press the SCAN button to perform a full scan.
2) Use the UP (+) and DOWN (-) buttons to move through available stations
Manual Scan:
1) Press and hold the ENTER button until the text “ Manual Tune” is displayed
2) Use the UP (+) and DOWN (-) buttons to move through available frequencies
3) The radio will attempt to “tune” into the inputted frequency and display “Tuning…”
on the digital display. If after 30 seconds “Tuning… still appears, the radio station
frequency you have inoutted can not be located. PRESS ENTER to return to normal
DAB+ mode.
1.
2.
3.
4.
5.
USER MANUAL DAB-DG120-SIL
5
AM / FM MODE
Press the MODE button to set the device to FM mode
Auto Tuning:
1) To scan upwards, press the SCAN button to tune to the next available station
Manual / Fine Tuning:
1) Press the UP button to increase the frequency by increment, or press and hold to
fast skip
2) Press the DOWN button to decrease the frequency increment, or press and hold to
fast skip
AUX MODE
Press the MODE button to set the device to AUX and to begin playback from your connect
device
SETTING UP PRESET STATIONS
Your DG120 can store up to 10 DAB+, 10 FM and 10 AM station presets (favourites) for quick
access
1) From either DAB+,FM or AM mode station, press and hold the PRESET button.
2) “Preset Empty 1” (or similar) will be displayed.
3) Use the Up (+) and Down (-) buttons to select the preset number you wish to use
and press Enter to store the station into memory
Returning to a preset station:
1) Press the PRESET button to show the preset screen
2) Using the UP (+) and DOWN (-) buttons, scroll through the station presets (1 thru
10)
3) Press the ENTER button to select your preferred preset station
BROWSE STATION INFORMATION
Press the INFO button repeatedly to scroll through information transmitted by the station in
either DAB+ or FM modes (where available):
USER MANUAL DAB-DG120-SIL
6
DAB+ FM
1) Multiplexer name 1) * RDS Information
2) Signal Strength 2) Program Type
3) Time and Date 3) Signal Strength
4) * DLS Information 4) Time and Date
5) Program Type 5) Channel Frequency
6) Frequency 6) Audio Mode
* DLS (Dynamic Label Segment): Scrolling text information that may comprise of information
on song titles, sporting results or other details provided by the program broadcaster
* RDS (Radio Data System): Small amounts of digital data supplied by the broadcaster that
may provide song or station details and various news results etc
SETTING THE CLOCK
Note: It is recommended to leave this setting at “RADIO”
1) Press and hold the SCAN button and press ENTER to enter this feature
2) Use the UP (+) and DOWN (-) buttons to select between MANUAL and RADIO
(automatic) upadating. Use the ENTER key to make you selection
3) If RADIO is selected the time and date will be automatically updated.
4) If MANUAL is selected, use the UP (+) and DOWN (-) buttons to adjust the settings
and the ENTER button to move between fields. When complete, press the ENTER
button one last to return to the main menu or wait 5 seconds.
SETTING THE ALARM
PRESS the ALARM button to scroll through settings, the VOLUME dial to adjust settings and
the ENTER button to conform your choice.
- To stop an alarm when it is sounding, press the Alarm Button.
- To “Snooze” an alarm for 10 minutes when it is sounding, press the Snooze button
Note: Settings for alarm 1 and/or 2 will be repeated the following day until they are turned
off using the main Alarm settings feature.
FACTORY RESET
If a factory reset is required;
1) Press and hold the MODE button
2) Then press the ENTER button (when prompt) to complete the factory reset
Note: The radio will return to the DAB+ mode and perform a auto-scan on start-up. All
presets or settings will be permanently deleted
USER MANUAL DAB-DG120-SIL
7
WHAT’S IN THE BOX
1 x DAB-DG120-SIL, 1 x AC adaptor, 1 x User Manual
TROUBLE SHOOTING / Q & A
The reception is poor in my area. Will your
DG120 work ok?
We recommend that you conduct a full
station scan upon first use. This will locate all
available stations in your area and check and
improve any weak signals.
You can also visit www.digitalradioplus.com.au
to check the signal strength in your area
I experience alot of interference when
using digital radios. What could cause this?
Other electronic/electrical devices may be
disrupting the supply of power to your
DG120. It is recommended that you trial the
unit on another power socket (circuit) to start
your trouble shooting process
How do I ensure that I am receiving the
strongest signal possible?
Make sure the antenna is fully extended and
free from any obstruction.
What other factors can affect signal
quality?
Geographical obstructions such as being at
the bottom of a valley or behind large hills will
reduce your ability to receive a strong signal.
Does the DG120 have a better/stronger
signal receiving capabilities than other
brands on the market?
The technologies behind common DAB+
brands in the market are reasonably identical.
As such there is no real reception difference
between different brands.
For further product information and instruction please visit our product
web page at www.laserco.net or email support@laserco.com.au
Please note: As continual improvements are made to this product, slight operational
differences may occur. For the most up-to-date user manual, please visit our web site.
USER MANUAL DAB-DG120-SIL
8
Warranty against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in
materials and workmanship for 12 months, from the date of purchase, provided that the
product is used in accordance with accompanying recommendations or instructions where
provided. The benefit of this warranty is in addition to your rights under the Australian
Consumer Law and to other rights and remedies of the consumer under a law in relation to
the goods or services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a
refund, repair or exchange (where possible) for this product if it becomes defective within
the warranty period. This warranty will no longer apply where the defect is a result of
alteration, accident, misuse, abuse, normal wear and tear, neglect or improper storage.
Please retain your receipt as proof of purchase
How to make a product warranty claim:
Step 1: Find your receipt which proves the date of purchase. Where the date of purchase
cannot be verified, your place of purchase or Laser will make an assessment based on the
date of manufacture, the condition of the Laser Product and the type of defect.
Step 2a): Contact your place of purchase. They will assess the nature of the fault and
refund or replace the product as per their store refund or warranty policy.
Step 2b): If your place of purchase cannot be contacted, then you can contact Laser .
Customer Service with details of your defective Laser Product: Phone: (02) 9870 3355; or
“Consumers (End Users)”). Our business address is at 1/6-8 Byfield Street, North Ryde, NSW
2113
Step 3: Laser . will issue you with a Return Authorisation (RA) number within 48 hours.
When requested, send us the defective Product and a copy of your receipt. Laser will cover
the cost of the return delivery.
Step 4: Wait for us to contact you. Once we have received your defective Laser Product for
inspection, we will inform you of our assessment of your claim within 7 days. When we
contact you, we will firstly let you know whether you have a valid claim under this Warranty,
and if so, we will inform you whether your defective Laser Product will be replaced or
repaired, together with the number of days you can expect to wait to receive your replaced
or repaired Laser Product.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
/
